Page "Bell TV" Paragraph 17
from
Wikipedia
Models 1000 and 2700 came out with very basic infrared ( IR ) remotes that could be used only to control the receivers themselves and would operate on all 16 remote addresses.
Replacement remotes then came with universal functions allowing users to control the power and volume of their televisions along with VCRs and sound system receivers ; these remotes can only operate on a single address at a time.
Models equipped with a UHF antenna can respond to UHF remotes ; these remotes use radio frequencies rather than IR signals to control the receivers.
For this model, modification directions exist on the Internet to add IR receiving capability, in order for the receiver to respond to programmable universal remotes.
" UHF Pro " remotes are strictly compatible with the receivers they are provided with and do not function on regular UHF-compatible receivers.
Additionally, " UHF Pro " remotes can only communicate with UHF frequencies and cannot control receivers via IR.
To prevent interference with other UHF remotes in proximity, clients should change their remote addresses.
All secondary remotes for dual tuners may also be converted to remote # 1 by flipping the plastic bottom of the remote.
This also switches its transmission mode from UHF Pro to regular UHF and IR, similar to how a 5900 remote operates.
Page 1 of 1.
2.091 seconds.