Page "hobbies" Paragraph 495
from
Brown Corpus
After the frames and transom are set up on the jig and temporarily braced, a piece of three-inch-wide mahogany ( only widths will be given since the 13/16-inch thickness is used throughout ) is butted between frames one and two below the line of the keelson.
The frames are glued and screwed to this piece.
The joints are also reinforced on each side with small blocks set in resin-saturated Fiberglas cloth and nailed.
It is over this piece that the laminated stem and keelson are spliced.
Page 1 of 1.
1.932 seconds.