Testing procedures for rescue carabiners are set out in ASTM International standard F 1956 Standard Specification of Rescue Carabiners.

The degree of chalking can be assessed according to International Standard ISO 4628 Part 6 or 7 or American Society of Testing and Materials ( ASTM ) Method D4214 ( Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films ).

The degree of cracking can be assessed according to International Standard ISO 4628 Part 4 or ASTM Method D661 ( Standard Test Method for Evaluating Degree of Cracking of Exterior Paints ).

It can be evaluated using ASTM Method ASTM D662 ( Standard Test Method for Evaluating Degree of Erosion of Exterior Paints ).

The degree of blistering can be assessed according to ISO 4628 Part 2 or ASTM Method D714 ( Standard Test Method for Evaluating Degree of Blistering of Paints ).

* ASTM Standard C 242-01 Standard Terminology of Ceramic Whitewares and Related Products

In 1865, John Pratt, of Centre, Alabama, built a machine called the Pterotype which appeared in an 1867 Scientific American article A modern description of the examination procedure is laid out in ASTM Standard E2494-08 ( Standard Guide for Examination of Typewritten Items ).

* ASTM D 5728 Standard Practice for Securement of Cargo in Intermodal and Unimodal Surface Transport

Reference ASTM standard specifications A767 Standard Specification for Hot Dip Galvanised Reinforcing Bars, A775 Standard Specification for Epoxy Coated Steel Reinforcing Bars and A955 Standard Specification for Deformed and Plain Stainless Bars for Concrete Reinforcement.

Most popular standard is the British Standard ( BS ) and American Standard ( ASTM ).

* ASTM D6537, Standard Practice for Instrumented Package Shock Testing for Determination of Package Performance.

* ASTM E122 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process

* ASTM E141 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling

* ASTM E1402 Standard Terminology Relating to Sampling

* ASTM E1994 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans

* ASTM E2234 Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL

* ASTM D3474 Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications

Guidelines for correct application of statistical methods to POD tests can be found in ASTM E2862 Standard Practice for Probability of Detection Analysis for Hit / Miss Data and MIL-HDBK-1823A Nondestructive Evaluation System Reliability Assessment, from the U. S. Department of Defense Handbook.

* ASTM E29-06b, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

Some common ones are shown below while others are listed in ASTM D5445 " Standard Practice for Pictorial Markings for Handling of Goods " and ISO 780 " Pictorial marking for handling of goods ".

* ASTM E 165, Standard Practice for Liquid Penetrant Examination for General Industry

* ASTM E 1417, Standard Practice for Liquid Penetrant Testing

* ASTM E543 Practice Standard Specification for Evaluating Agencies that Performing Nondestructive Testing

* ASTM E29-06b, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

* ASTM F2029-Standard Practice for Making Heat Seals for Determination of Heat Sealability of Flexible Webs Measured by Seal Strength

* ASTM F2504-Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices

* ASTM E2281 Standard Practice for Process and Measurement Capability Indices

Standards that describe calibration and operation for radiation dosimetry, as well as procedures to relate the measured dose to the effects achieved and to report and document such results, are maintained by the American Society for Testing and Materials ( ASTM international ) and are also available as ISO / ASTM standards.

Abstract Syntax Tree Metamodel ( ASTM ), a modeling language for fine grained reverse engineering.

The WSIA has played a major role in developing the ASTM best practices for weather standards for parasailing.

This committee has worked diligently with the ASTM in the creation of our first best practice for the parasail industry in the summer of 2012.

Commercial machine shops, especially those that do certain categories of work ( military or commercial aerospace, nuclear power industry, and others ), are required by various standards organizations ( such as ISO, ANSI, ASME, ASTM, SAE, AIA, the U. S. military, and others ) to calibrate micrometers and other gauges on a schedule ( often annually ), to affix a label to each gauge that gives it an ID number and a calibration expiration date, to keep a record of all the gauges by ID number, and to specify in inspection reports which gauge was used for a particular measurement.

ASTM B322 is a standard guide for cleaning metals prior to electroplating.

Industry labeling practice is to include a lightfastness rating on the paint packaging, and painters should only use paints that have a lightfastness rating of I or II under the testing standards published the American Society of Testing and Materials ( now ASTM International ).

American wire gauge ( AWG ), also known as the Brown & Sharpe wire gauge, is a standardized wire gauge system used since 1857 predominantly in the United States and Canada for the diameters of round, solid, nonferrous, electrically conducting wire .< ref >< abbr title =" American Society for Testing And Materials "> ASTM </ abbr > Standard B 258-02, Standard specification for standard nominal diameters and cross-sectional areas of AWG sizes of solid round wires used as electrical conductors, ASTM International, 2002 </ ref > The cross-sectional area of each gauge is an important factor for determining its current-carrying capacity.

These specifications are published by the Gas Processors Association ( GPA ) and the American Society of Testing and Materials ( ASTM ).

ASTM International ( formerly American Society for Testing and Materials ) defines it as the loss of material due to hard particles or hard protuberances that are forced against and move along a solid surface.

The American Society for Testing and Materials, International ( ASTM ) publishes standards for many methods and procedures used by FDEs.

On standards published by International Organisation for Standardisation ( ISO ), IEC ( International Electrotechnical Commission ), ASTM ( American Society for Testing and Materials ), IEEE ( Institute of Electrical and Electronics Engineers ), requirements with " shall " are the mandatory requirements, meaning, " must ", or " have to ".

* Engineering Dielectrics, Volume IIA, Electrical Properties of Solid Insulating Materials: Molecular Structure and Electrical Behavior, R. Bartnikas, R. M Eichhorn, ASTM Special Technical Publication 783, ASTM, 1982

The American Society for Testing and Materials ( ASTM ) developed specifications for automobile gasoline as well as aviation gasoline.

; American Society of Testing and Materials ( ASTM )

The analysis of fire debris using GC-MS is well established, and there is even an established American Society for Testing Materials ( ASTM ) standard for fire debris analysis.

ASTM International, known until 2001 as the American Society for Testing and Materials ( ASTM ), is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services.

ASTM, founded in 1898 as the American Section of the International Association for Testing and Materials, predates other standards organizations such as BSI ( 1901 ), DIN ( 1917 ), ANSI ( 1918 ) and AFNOR ( 1926 ).

In 1898, he was one of the founders of the American Society for Testing and Materials ( ASTM ), becoming president from 1902 to 1908.

American Society for Testing and Materials ( ASTM International ) – A consensus organization, representing 135 countries, that develops and delivers international voluntary standard methods for aquatic toxicity testing.

The standard ASTM F1459-06 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement ( HGE ) Test uses a diaphragm loaded with a differential pressure.

* American Society for Testing and Materials, 1985, D 2487-83, Classification of Soils for Engineering Purposes: Annual Book of ASTM Standards.

Nearly all CSI approved sections also include performance and safety requirements generated by agencies such as the American Society for Testing and Materials ( ASTM ), Occupational Safety and Health Administration ( OSHA ), and numerous other federal and professional organizations.

Individual staff members participate in professional society activities, in working groups and committees, such as American Society for Testing and Materials ( ASTM ), International Organization for Standardization ( ISO ) and American National Standards Institute ( ANSI ) committees, the Health Physics Society, and on editorial and accreditation boards.