The Canadian Standard for high-visibility clothing is similar to the EN 471 and ANSI 107 standards but allows for " bright colours " to be used in flame resistant applications and has specific design requirements including requirement to have an " X " style reflective trim on the back of the garment to designate to the driver if the worker is facing away.

In America it is based mostly on AIA-NAS-410 and in the European Union on the equivalent and very similar standard EN 4179

The approximate alloying composition of 531 tubing is 1. 5 % Mn, 0. 25 % Mo, 0. 35 % C, and is similar to the old British BS970 En 16 / 18 steel ( EN 16 is similar to grade BS970 605M36 ).

Using electrical components from the Swiss-German company BBC MaK started production of diesel-electric locomotives-some were successful, notably the EN 6400 of which 120 were bought by Nederlandse Spoorwegen.

Many British Standards ( BSs ) – as well as some of the European and International Standards that were adopted as British Standards ( BS EN, BS ISO ) – are also available in public and university libraries in the United Kingdom.

* Violaine Hacker, « Citoyenneté culturelle et politique européenne des médias: entre compétitivité et promotion des valeurs », NATIONS, CULTURES ET ENTREPRISES EN EUROPE, sous la direction de Gilles Rouet, Collection Local et Global, L ’ Harmattan, Paris, pp. 163 – 184

* EN 62040-1-1: 2006 Uninterruptible power systems ( UPS ) – Part 1-1: General and safety requirements for UPS used in operator access areas

* EN 62040-1-2: 2003 Uninterruptible power systems ( UPS ) – Part 1-2: General and safety requirements for UPS used in restricted access locations

* EN 62040-2: 2006 Uninterruptible power systems ( UPS ) – Part 2: Electromagnetic compatibility ( EMC ) requirements

* EN 62040-3: 2001 Uninterruptible power systems ( UPS ) – Part 3: Method of specifying the performance and test requirements

These are available in Code Division Multiple Access ( CDMA ), Digital Enhanced Cordless Telecommunications – DECT ( TDMA / DCA ) ( See ETSI 6 EN 300 765-1 V1. 3. 1 ( 2001-04 ) -" Digital Enhanced Cordless Telecommunications ( DECT ); Radio in the Local Loop ( RLL ) Access Profile ( RAP ); Part 1: Basic telephony services "), Global System for Mobile Communications ( GSM ), IS136 Time Division Multiple Access ( TDMA ) as well as analog access technologies such as Advanced Mobile Phone System ( AMPS ), for which there will be independent standards defining every aspect of modulation, protocols, error handling, etc.

During 1960 – 1980 a HVEC EN tandem accelerator was used by nuclear physics for light ion research.

En-hedu-ana ( 2, 285 BC – 2, 250 BC ), an Akkadian woman, was the first known holder of the title " EN Priestess ".

* IEC 60270: 2000 / BS EN 60270: 2001 " High-Voltage Test Techniques – Partial Discharge Measurements "

* Cambarus harti EN – piedmont blue burrower

The European standard for letter boxes, EN 13724: 2002 " Postal services – Apertures of private letter boxes and letter plates – Requirements and test methods ", replaces earlier national standards such as BS 2911: 1974 " Specification for letter plates " or DIN 32617.

* GSM 04. 90 ( ETSI EN 300 957, V7. 0. 1 ) Specification ( USSD ) – Stage 3 at 3Gpp. org

* CEN – CONTSYS ( EN 13940 ), a system of concepts to support continuity of care.

* CEN – EHRcom ( EN 13606 ), a standard for the communication of information from EHR systems.

* CEN – HISA ( EN 12967 ), a services standard for inter-system communication in a clinical information environment.

Veit – Innsbruck ( 1 train per day, additional EC trains to Bregenz and as EN to Zurich ).

* ETSI EN 300 707 V1. 2. 1 ( 2003 – 04 ) " Electronic Programme Guide ( EPG ); Protocol for a TV Guide using electronic data transmission "

* EN 50090-2-3: 2005: System overview – General functional safety requirements for products intendedto be integrated in HBES

* EN 50090-9-1: 2004: Installation requirements – Generic cabling for HBES Class 1 TwistedPair

* EN 50090-4-2: 2004: Media independent layers – Transport layer, network layerand general parts of datalink layer for HBES Class 1

* BS EN 60204-1: 2009 Safety of machinery-Electrical equipment of machines

Safety, testing and approval of opto-couplers are regulated by national and international standards: IEC 60747-5-2, EN ( CENELEC ) 60747-5-2, UL 1577, CSA Component Acceptance Notice # 5, etc.

* Occupational safety and health, including compliance with local, state, and national laws and agencies, such as the Occupational Safety and Health Administration ( OSHA ), the Environmental Protection Agency ( EPA ), and EN 54

Safety standards for treadmills are the IEC EN 957-1 and IEC EN 957-6.

Safety guidelines for healthcare workers recommend the wearing of a face-fit tested respirator mask conforming to United States standard NIOSH N95 or European standard EN 149 FFP3 in the vicinity of pandemic-flu patients, to reduce the exposure of the wearer to potentially infectious aerosols and airborne liquid droplets.

Safety and other standards for bunk beds are specified by: the European Committee for Standardization standard BS EN 747-1: 2007 ; ASTM International standard ASTM F1427-07 ; Standards Australia and Standards New Zealand standard AS / NZS 4220: 2003 ; International Organization for Standardization standard ISO 9098-1: 1994.

In Europe there is a published standard BS EN 1570: 1998 + A2: 2009 Safety requirements for lifting tables.

The EU standard for high chairs EN 14988 parts 1 and 2 can be used as a voluntary standard to show compliance to the General Product Safety Directive.

Using appropriate safe input hardware ( e. g. light curtains, e-stop buttons, and door interlock switches ), AS-Interface can provide safety support up to SIL ( Safety Integrity Level ) 3 according to EN 62061, CAT 4 according to EN954-1 as well as Performance Level e ( PL e ) according to EN ISO 13849-1.

EN 1089-2: 2002 Transportable gas Cylinders, Part 2-Precautionary labels Superseded by EN ISO 7225: 2007.

EN 1089-3: 2004 Transportable gas Cylinders, Part 3-Colour coding Current standard.

* CEN EN 1089-3: Transportable gas cylinders, Part 3-Colour Coding.

The Generic Access Profile ( GAP ) ( ETSI standard EN 300 444 ) describes a set of mandatory requirements to allow any conforming DECT Fixed Part ( base ) to interoperate with any conforming DECT Portable Part ( handset ) to provide basic telephony services when attached to a 3. 1 kHz telephone network ( as defined by EN 300 176-2 ).

* ETSI EN 301 839-1 " Electromagnetic compatibility and Radio spectrum Matters ( ERM ); Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories ; Part 1: Technical characteristics, including electromagnetic compatibility requirements, and test methods.

| align = center | 7 || Seven < font size =- 2 >( FAA )</ font > Setteseven < font size =- 2 >( ITU, IMO )</ font >|| SEV-EN < font size =- 2 >( ICAO )</ font >, SEV EN < font size =- 2 >( FAA )</ font > SAY-TAY-SEVEN < font size =- 2 >( ITU, IMO )</ font >

* 1986-Arturo Sandoval EN CONCIERTO VOL. 2

<! DOCTYPE X3D PUBLIC " ISO // Web3D // DTD X3D 3. 2 // EN " " http :// www. web3d. org / specifications / x3d-3. 2. dtd ">

* ETSI EN 301 775 V1. 2. 1 ( 2003-05 ), Specification for the carriage of Vertical Blanking Information ( VBI ) data in DVB bitstreams

* DVB-S EN 300 421 V1. 1. 2 ( 08 / 97 ) Framing structure, channel coding and modulation for 11 / 12 GHz satellite services

According to fire tests conformant to EN 54, the CO < sub > 2 </ sub > cloud from open fire can usually be detected before particulate.

* EN 1371-2, Founding-Liquid penetrant inspection-Part 2: Investment castings

* EN 10228-2, Non-destructive testing of steel forgings-Part 2: Penetrant testing

* Digital Video Broadcasting ( DVB ); Second generation framing structure, channel coding and modulation systems for Broadcasting, Interactive Services, News Gathering and other broadband satellite applications ( DVB-S2 ), ETSI EN 302 307, V1. 2. 1, April 2009.

Rules for the detailing of reinforcement and prestressing tendons are provided in Section 8 of the European standard EN 1992-2: 2005-Eurocode 2: Design of concrete structures-Concrete bridges: design and detailing rules.

In the European Standard " Classification of fires " ( EN 2: 1992, incorporatiing amendment A1: 2004 ), the fires are classified as:

<! DOCTYPE topic PUBLIC "-// OASIS // DTD DITA 1. 2 Topic // EN " "../../ dtd / technicalContent / dtd / topic. dtd ">

In 2010 BS 8110 was superseded by EN 1992 ( Eurocode 2 ) although parts of the standard have been retained in the National Annex of the Eurocode.