Help


[permalink] [id link]
+
Page "Bunsen burner" ¶ 12
from Wikipedia
Edit
Promote Demote Fragment Fix

Some Related Sentences

burner and
On top of the spray chamber is a burner head that produces a flame that is laterally long ( usually 5 10 cm ) and only a few mm deep.
* Teclu burner The lower part of its tube is conical, with a round screw nut below its base.
The combustion burner reached a temperature of 2500 2700 ° C ( 4500 4900 ° F ).
In 742 Emperor Xuanzong personally held the incense burner during the ceremony of the Ceylonese monk Amoghavajra ( 705 74 ) reciting " mystical incantations to secure the victory of Tang forces.
Track was not used the boiler was filled with water, the burner lit, and when steam was being produced, the locomotive was placed on the floor and allowed to run until either the water or fuel ran out or the engine crashed into the furniture.
The design of most portable gas cartridge stoves is similar to that of many pressurized burner stoves, except the fuel tank or cartridge contains a liquefied gas typically butane, propane or a mixture of hydrocarbons that is held under pressure.
These controls are called “ snap action ” because the control mechanism will turn the burner valve or electrical element fully on or completely off, with no modulation or intermediate heat source operation effectively ‘ snapping ’ the heat source on or off.
In China, the Han Dynasty ( 202 BC AD 220 ) inventor Ding Huan created a gimbal incense burner around AD 180.
* staged combustion cycle the high pressure outlet from the turbopump is fed back to power a burner which then powers the turbopump in a self starting cycle.
The boilers were safer than one might expect they were fitted with safety valves, and even if these failed, a dangerous overpressure would rupture one of the many joints long before the boiler shell was in danger of bursting, and the resulting leak would relieve the boiler pressure and douse the burner with little risk to the occupants of the car.
# Sentimental Journeys-What do these have in common Freud, lifestyle crisis, electric shock therapy, hypnotherapy, magnetism, frenology, penology, physiology, synthetic dyes, the Bunsen burner, absorption, Fraunhofer lines, astronomical telescopes, chromatic aberrations, and surveying?
This quality was reflected in their prices, which were some of the highest in the marketplace ($ 250 350USD for a 4x CD-R burner in 1995 ).
They carry the sacrificial instruments and paraphernalia including the phiale ( phial or jug ), oinochoai ( wine jars ), thymiaterion ( incense burner ), and in the case of E50 51 they have evidently just handed the marshal E49 a kanoun, making the girl the kanephoros.

burner and lower
The lower part of the wick dips into the fount and absorbs the kerosene ; the top part of the wick extends out of the wick tube of the lamp burner, which includes a wick-adjustment mechanism.
The " coiled burner " stove is a variant on the pressurized burner design, in which the burner assembly consists of a coiled loop with a small hole in the lower part, through which the vaporized fuel exits and combusts.
* The Xia Jiao ( lower burner )-Is located in the " bowl " of the pelvis, or pelvic girdle corresponding to the lower part of the dorsal cavity.
The ' Low Water Content ' boiler has a lower and upper header connected by water tubes that are directly impinged upon from the burner.
Current burner units are much lower than the original design so as to increase stability and help prevent tip-overs.

burner and part
A few manufacturers of such stoves, notably Kenmore Appliances and Viking Range Corp. now include a specially-designed high-output bridge-type wok burner as part of their standard or optional equipment, though even high-heat models are limited to a maximum of around 27, 000 BTU ( 7. 9 kW ).
The pulverized coal is blown with part of the combustion air into the boiler plant through a series of burner nozzles.
Often in gas turbine designs part of the compressed air flow bypasses the burner and is used to cool the turbine blades.
Thai border disputes with Laos, the 1997-98 Asian financial crisis, political indifference in Bangkok and a general reluctance on the part of Thais have kept the project on the political ' back burner '.
It breaks down into two parts, the first part being a steel stand / windshield / wood-burning stove ( with a Svea alcohol burner unit ), whilst the other part consists of two pots ( usually aluminium ).
The Desaga family held the right to market the burner for generations, as part of an agreement made with Bunsen.
A burner is also part of the table setting for kondor / loban ( frankincense ) and espand ( Syrian Rue seeds ) to be thrown on the flames.

burner and its
The toasted rice develops on its own if the paella is cooked over a burner or open fire.
A hot-tube ignitor consisted of a metal or porcelain tube, closed at one end and attached to the cylinder head at the other and an adjustable burner that could be moved to position its flame at any point along the length of the tube.
Because of its fuel efficiency and high heat output, the pressurized burner stove remains in wide use to the current day.
Distinguished from other ultraportable laptops by its usage of LED backlighting, removable battery, solid state drive, and integrated DVD burner, it is the flagship model for the X-series.
Despite its eventual success, Minder was a slow burner, not helped by being delayed by a nine-week technicians ' strike which effectively blacked out the ITV network.
As with town gas, a small amount of foul-smelling substance ( mercaptan ) is added to the gas to indicate to the user that there is a leak or an unlit burner, the gas having no odour of its own.
It had previously applied the name to its " Sterno-Inferno " alcohol burner.
Chicago 17 was a slow burner, finally reaching # 4 in the US in early 1985, even seeing significant-and rare-success in the UK, on the strength of its many hits.
When the boiler had achieved maximum working pressure, the burner would cut out until pressure had fallen to a minimum level, whereupon it would re-ignite ; by this means the car could achieve around 15 miles per gallon ( 18. 8 litres / 100 km ) of kerosene despite its weight in excess of.
The Corsican club celebrated its debut on the Place d ' Armes of Bastia, in the light of a single gas burner.
In addition to the burner, the standard stove set includes a base, which lifts the burner off the ground and has vents to provide airflow, and a windscreen, which protects the pot and flame ( the latter leading to its Swedish nickname, the " stormkök ", or " storm kitchen ").
Critic David Ansen gave the film a mixed review, writing, " Taylor Hackford's thriller Proof of Life leaves a lot to be desired, but it's got its hands on a fascinating subject ... To be fair, Tony Gilroy's screenplay keeps the romance on the back burner ... Thorne is the most compelling aspect of Proof of Life, thanks to Crowe's quiet, hard-bitten charisma.
The election finds its historical importance in the fact that, in the first era of said " Post-Referendum Syndrome ", the election of Pierre-Marc Johnson secured the party's past decision of putting the independence project, the first raison d ' être of the PQ, on the back burner.

burner and tube
The gap, set by the distance between the nut and the end of the tube, regulates the influx of the air in a way similar to the open slots of the Bunsen burner.
The grid separates the flame into an array of smaller flames with a common external envelope, and also prevents flashback to the bottom of the tube, which is a risk at high air-to-fuel ratios and limits the maximum rate of air intake in a conventional Bunsen burner.
One common, efficient design uses a cylindrical forge chamber and a burner tube mounted at a right angle to the body.
The wick tube surrounds the wick, and ensures that the correct amount of air reaches the lamp burner.
If the wick is too high, and extends beyond the burner cone at the top of the wick tube, the lamp will produce smoke and soot ( unburned carbon ).
The burner uses a wick, usually made of cotton, that is made of a wide, flat wick rolled into a tube, the seam of which is then stitched together to form the complete wick.
On early designs, ignition timing was adjusted by adjusting the position of the red-hot spot on the tube — this was accomplished by moving the burner along the length of the tube.
Most later styles used a fixed burner and varied tube lengths to change ignition timing.
Also important was never setting the burner flame where it would heat the tube white hot, which would rapidly damage the tube and could cause it to burst explosively.
First introduced in 1973 and designated the Model 9 ( and later as the XGK Expedition ), the MSR stove had four main parts: a free-standing burner assembly with integrated pot supports ; the fuel bottle, which doubles as the stove's fuel tank ; a pump that screws into the bottle ; and a flexible tube or pipeline connecting the pump / bottle assembly to the burner assembly.
In flame atomisation the sample is first converted into fine mist consisting of small droplets of the solution. This is done using a neubulizer assembly. The sample is aspirated into a spray chamber by passing a high pressure stream consisting of one or more cumbustion gases which are passed at the end of the capillary tube immersed in the sample. The impact of the sample with a glass impact bead produces an aerosol mist. The aerosol mist mixes with cumbust gases in the spray chamber before passing to the burner, where the flame thermal energy desolvates the aerosol mist towards dry aerosol particles.
The Siegle steam spray inhaler consisted of a spirit burner, which boiled water in the reservoir into steam that could then flow across the top and into a tube suspended in the pharmaceutical solution.
The tube is suspended over a bunsen burner.
CFLs have two main components: a magnetic or electronic ballast and a gas-filled tube ( also called bulb or burner ).
The fire tube boilers are fired by spraying and igniting fuel oil ( see below ) onto a carbon based ceramic fire-brick plate burner.
The ignition tube is being heated by the Bunsen burner on the left, with the heated gas escaping from the tube to the pan via the delivery tube on top and at right.

0.237 seconds.