The Dynamic Host Configuration Protocol ( DHCP ) is a network protocol that is used to configure network devices so that they can communicate on an IP network.

If IPv6 stateless address autoconfiguration is unsuitable for an application, a network may use stateful configuration with the Dynamic Host Configuration Protocol version 6 ( DHCPv6 ) or hosts may be configured statically.

Configuration around double bonds is specified using the characters "/" and "

Theodora Kroeber's biography of her husband, Alfred Kroeber: A Personal Configuration, is a good source for Le Guin's early years and for the biographical elements in her late works, especially her interest in social anthropology.

Configuration management ( CM ) is a process for establishing and maintaining consistency of a product ’ s performance and functional and physical attributes with its requirements, design and operational information throughout its life.

Configuration Management ( CM ) as a formal management approach was developed by the USAF for the DoD in the 1950s as a technical management discipline for hardware material items — and it is now a standard practice in virtually every industry.

* Configuration identification is the process of identifying the attributes that define every aspect of a configuration item.

* Configuration change control is a set of processes and approval stages required to change a configuration item's attributes and to re-baseline them.

* Configuration status accounting is the ability to record and report on the configuration baselines associated with each configuration item at any moment of time.

Configuration management is used to maintain an understanding of the status of complex assets with a view to maintaining the highest level of serviceability for the lowest cost.

A common way of characterizing network management functions is FCAPS — Fault, Configuration, Accounting, Performance and Security.

The Connected Limited Device Configuration ( CLDC ) contains a strict subset of the Java-class libraries, and is the minimum amount needed for a Java virtual machine to operate.

The Connected Device Configuration is a subset of Java SE, containing almost all the libraries that are not GUI related.

The Foundation Profile is a Java ME Connected Device Configuration ( CDC ) profile.

* Configuration file is a software file used to configure the initial settings for a computer program

* Configuration management is a management discipline

Configuration is typically stored in a configuration PROM or EEPROM.

A change is an event that results in a new status of one or more Configuration items ( CIs ), and which is approved by management, cost-effective, enhances business process changes ( fixes ) – all with a minimum risk to IT infrastructure.

Service asset and configuration management is primarily focused on maintaining information ( i. e., configurations ) about Configuration Items ( i. e., assets ) required to deliver an IT service, including their relationships.

Configuration management is the management and traceability of every aspect of a configuration from beginning to end and it includes the following key process areas under its umbrella:

The Application Configuration Access Protocol ( ACAP ) is a protocol for storing and synchronizing general configuration and preference data.

Configuration of the first custom VLAN port group usually involves removing ports from the default VLAN, such that the first custom group of VLAN ports is actually the second VLAN on the device, in addition to the default VLAN.

This family of " warehouse appliance-like " systems was given the name IBM Balanced Configuration Unit, or BCU, and is aimed at the warehouse appliance market typified by Netezza and DATAllegro, but it differentiates itself in that it uses the full-featured version of DB2 instead of a single-purpose warehouse-oriented RDBMS.

There are also rare cases of systems, e. g. the Field-Reversed Configuration, predicted by MHD to be unstable, but which are observed to be stable, probably due to kinetic effects.

Configuration uses compressed XML ( full XML can be used ) to provide an adaptable and elegant solution.

* Handset Configuration: Unlike SMS, MMS requires a number of handset parameters to be set.

It is officially supported on the iPhone 4, iPhone 4S, iPhone 5, iPod Touch ( 4th and 5th generations ), iPad 2, and iPad ( 3rd generation ), but hackers have discovered that it can be installed manually on older devices using Apple's iPhone Configuration Utility application.

Without zeroconf, a network administrator must set up services, such as Dynamic Host Configuration Protocol ( DHCP ) and Domain Name System ( DNS ), or configure each computer's network settings manually, which may be difficult and time-consuming.

The Connected Device Configuration ( CDC ) is a specification of a framework for Java ME applications describing the basic set of libraries and virtual-machine features that must be present in an implementation.

The Connected Limited Device Configuration ( CLDC ) is a specification of a framework for Java ME applications describing the basic set of libraries and virtual-machine features that must be present in an implementation.

The history of software configuration management ( SCM ) in computing can be traced back as early as the 1950s, when CM ( for Configuration Management ), originally for hardware development and production control, was being applied to software development.

Until the 1980s, as can be seen from a source such as Software Configuration Management by J. K. Buckle ( 1982 ), SCM could only be understood as CM applied to software development.

It makes use of several network protocols like Internet Protocol ( IPv4 ), User Datagram Protocol ( UDP ), Dynamic Host Configuration Protocol ( DHCP ) and Trivial File Transfer Protocol ( TFTP ) and of concepts like Globally Unique Identifier ( GUID ), Universally Unique Identifier ( UUID ) and Universal Network Device Interface and extends the firmware of the PXE client ( the computer to be bootstrapped via PXE ) with a set of predefined Application Programming Interfaces ( APIs ).

Configuration data can be stored on floppy disk or USB sticks.

The Mindset had the option ( through its System Configuration Utility ) to be able to select whether the system booted from Left or Right ROM carts, or Disk Drive.

In the context of application design, an address pool may be the availability of a set of addresses ( IP address, MAC address ) available to an application that is shared among its users, or available for allocation to users, such as in host configurations with the Dynamic Host Configuration Protocol ( DHCP ).

An ongoing debate in the film series is whether the realm accessed by the Lament Configuration is intended to be the Abrahamic version of Hell, or a dimension of endless pain and suffering that is original to the Hellraiser films.

* Configuration versatility — Externally powered electronic products can be used with different power sources as needed ( e. g. 120VAC, 240VAC, 12VDC, or external battery pack ), for convenient use in the field, or when traveling.

These must be defined either arbitrarily or randomly, and most commonly arise in computer applications, such as dynamic IP addresses assigned by Dynamic Host Configuration Protocol.

* Shared Configuration and Management Efficiency: Quattor encourages the re-use of configuration information in such a way that it can be distributed and used with little or no modification at different sites, facilitating the distribution of best practices without the need for each site to implement configuration changes.

* Change control board ( or Configuration Control Board ), a committee that makes decisions regarding whether or not proposed changes to a software project should be implemented

Exceptions are the use of lower hybrid waves to heat fusion plasmas and the lower hybrid drift instability, which was thought to be an important determinant of transport in the Field-Reversed Configuration ( but was not found experimentally < ref >).

Configuration was not automatic-free UMBs had to be identified by hand, manually included in the line that loaded EMM386 from CONFIG. SYS, and then drivers and so on had to be manually loaded into UMBs from CONFIG. SYS and AUTOEXEC. BAT.