Configuration of the first custom VLAN port group usually involves removing ports from the default VLAN, such that the first custom group of VLAN ports is actually the second VLAN on the device, in addition to the default VLAN.

Maven accomplishes this by embracing the idea of Convention over Configuration, that is, Maven provides default values for the project's configuration.

By default, upon installation, the OMA enables several packs ( Change Management, Performance & Tuning, Diagnostics and Configuration Management ) without any regard to what a customer has licensed.

If IPv6 stateless address autoconfiguration is unsuitable for an application, a network may use stateful configuration with the Dynamic Host Configuration Protocol version 6 ( DHCPv6 ) or hosts may be configured statically.

Set of hyperfrequency tubes ( 84 GHz and 118 GHz ) for plasma heating by electron cyclotron waves on the Tokamak à configuration variable | Tokamak à Configuration Variable ( TCV ).

* Configuration Status Accounting: Includes the process of recording and reporting configuration item descriptions ( e. g., hardware, software, firmware, etc.

Configuration audits verify the system and subsystem configuration documentation complies with their functional and physical performance characteristics before acceptance into an architectural baseline.

* Configuration identification is the process of identifying the attributes that define every aspect of a configuration item.

* Configuration change control is a set of processes and approval stages required to change a configuration item's attributes and to re-baseline them.

* Configuration status accounting is the ability to record and report on the configuration baselines associated with each configuration item at any moment of time.

* Configuration audits are broken into functional and physical configuration audits.

CM for information assurance, sometimes referred to as Secure Configuration Management, relies upon performance, functional, and physical attributes of IT platforms and products and their environments to determine the appropriate security features and assurances that are used to measure a system configuration state.

Configuration is typically stored in a configuration PROM or EEPROM.

Service asset and configuration management is primarily focused on maintaining information ( i. e., configurations ) about Configuration Items ( i. e., assets ) required to deliver an IT service, including their relationships.

Configuration management is the management and traceability of every aspect of a configuration from beginning to end and it includes the following key process areas under its umbrella:

The Application Configuration Access Protocol ( ACAP ) is a protocol for storing and synchronizing general configuration and preference data.

* Configuration identification-Identifying configurations, configuration items and baselines.

It accomplishes this without assistance of server-based configuration mechanisms, such as the Dynamic Host Configuration Protocol ( DHCP ) or the Domain Name System ( DNS ), and without special static configuration of a network host.

* Configuration Management Database Federation ( CMDBf )-CMDBf facilitates the sharing of information between configuration management databases ( CMDBs ) and other management data repositories ( MDRs ).

* OpenLDAP Version 2. 3, released in June 2005, included the Configuration Backend ( dynamic configuration ), additional overlays including RFC-compliant Password Policy software, and numerous additional enhancements.

* Unified Configuration Interface a set of scripts to unify and simplify the configuration of a Linux distribution.

* ucf ( Update Configuration File ), a Unix utility for preserving user changes to configuration files

* Configuration item, the fundamental structural unit of a configuration management system.

Configuration of a PPPoA requires PPP configuration and ATM configuration.

* Profile Configuration File, a configuration file used to set up VPN connections

* Configuration file, used to provide initial settings to a computer program / operating system

* Configuration file, a file used to configure the initial settings for some computer programs

* Configuration file is a software file used to configure the initial settings for a computer program

* Configuration stored in an INI file

* Printer Configuration File, a file used to configure printer settings

* Pronto Configuration File, a Philips Pronto configuration file used by Pronto universal programmable IR / RF remote controls

Configuration files also do more than just modify settings, they often ( in the form of an " rc file ") run a set of commands upon startup ( for example, the " rc file " for a shell might instruct the shell to change directories, run certain programs, delete or create files —- many things which do not involve modifying variables in the shell itself and so were not in the shell's dotfiles ); according to the Jargon File, this convention is borrowed from " runcom files " on the CTSS operating system ; see run commands for details.

The WPAD standard defines two alternative methods the system administrator can use to publish the location of the proxy configuration file, using the Dynamic Host Configuration Protocol ( DHCP ) or the Domain Name System ( DNS ):

Configuration is done by modifying a text file.

The ActionProxy invokes the Configuration File manager to get the attributes of the action, which is stored in the xwork. xml file and creates an ActionInvocation object.

# REDIRECT Configuration file

Configuration and services that are vulnerable to IP spoofing:

* Knowledge-based Configuration, intelligent techniques for complex products and services.

Without zeroconf, a network administrator must set up services, such as Dynamic Host Configuration Protocol ( DHCP ) and Domain Name System ( DNS ), or configure each computer's network settings manually, which may be difficult and time-consuming.

There are a variety of " add-on " tools available for CA Gen, including Project Phoenix from Jumar-a collection of software tools and services focused on the modernisation and re-platforming of existing / legacy CA Gen applications to new environments Jumar, GuardIEn-a Configuration Management and Developer Productivity Suite by IET Ltd and QAT Wizard, an interview style wizard that takes advantage of the meta model in Gen, and products by Canam Software Labs for multi-platform application reporting and XML / SOAP enabling of Gen applications.

Configuration files define the parameters of services run by launchd.