AMPS was originally standardized by ANSI as EIA / TIA / IS-3.

There are a number of common, standard and manufacturer-driven numbering and coding schemes for diodes ; the two most common being the EIA / JEDEC standard and the European Pro Electron standard:

The standardized 1N-series numbering EIA370 system was introduced in the US by EIA / JEDEC ( Joint Electron Device Engineering Council ) about 1960.

** EDIF Monograph Series, Volume 1, Introduction to EDIF, EIA / EDIF-1, Sept. 1988

** EDIF Monograph Series, Volume 2, EDIF Connectivity, EIA / EDIF-2, June 1989

** Using EDIF 2 0 0 for schematic transfer, EIA / EDIF / AG-1, July 1989

This is typically used over non-filtered wires such as fiber optical cables and short-range copper links, for example: V. 29 ( EIA / TIA-232 ), V. 35, IEEE 802. 3, SONET / SDH.

Standard EIA / TIA 561 specifies a pin assignment, but the " Yost Serial Device Wiring Standard "

In 1971, Peter Perlmann and Eva Engvall at Stockholm University in Sweden, and Anton Schuurs and Bauke van Weemen in the Netherlands independently published papers that synthesized this knowledge into methods to perform EIA / ELISA.

* C0G, an EIA Class 1 dielectric material with the lowest capacitance / temperature dependence

Years later, the TIA / EIA raised the 2400-baud command set into a formal standard with the title Data Transmission Systems and Equipment-Serial Asynchronous Automatic Dialing and Control, TIA / EIA-602.

The first RMA digit thus was re-allocated from " heater power " to " p-n junction count " to form the new EIA / JEDEC EIA-370 standard ; for example, the 1N4001 rectifier diode and 2N2222 transistor part numbers came from EIA-370.

Avgas has an emission coefficient ( or factor ) of 18. 355 pounds CO < sub > 2 </ sub > per U. S. gallon ( 2. 1994 kg / l )< ref name =" US DOE EIA 2005 ">

CTCSS tones are standardized by the EIA / TIA.

Because the EIA was accredited by ANSI to help develop standards in its areas, the standards are often described as e. g. ANSI TIA-232 ( or formerly as ANSI EIA / TIA-232 ').

The standard has been renamed several times during its history as the sponsoring organization changed its name, and has been variously known as EIA RS-232, EIA 232, and most recently as TIA 232.

It was standardized by Electronic Industries Alliance ( EIA ) and Telecommunications Industry Association ( TIA ) together.

Time Division Multiple Access or TDMA was initially defined by the IS-54 standard and is now specified in the IS-13x series of specifications of the EIA / TIA.

( e. g. EIA / TIA – 553 analog, IS – 136 TDMA, IS – 95 or IS-2000 CDMA ).

TIA / EIA standard IS-641 is a speech coding standard used in some computer and telecommunications networks in the U. S. A. Main usage was in the U. S. TDMA networks defined by IS-136.

EIA / TIA specifies specific values for ACR in order to meet the various categories of cable.

Low-voltage differential signaling or LVDS, on the other hand, is a specific system defined by a TIA / EIA standard.

Tower types vary from one manufacturer to another ; guyed vs. unguyed, methods of deploying the tower, whether it meets TIA / EIA specifications.

* EIA / TIA Standards

Most notably, from 1995 to 1998, ownership of EVM criteria ( reduced to 32 ) was transferred to industry by adoption of ANSI EIA 748-A standard.

Because of some fundamental weaknesses in the 2 0 0 release a new not compatible release 3 0 0 was released in September 1993, given the designation of EIA standard EIA-618.

It was found by investigators from the Environmental Investigation Agency ( EIA ) that CITES sales of stockpiles from Singapore and Burundi ( 270 tonnes and 89. 5 tonnes respectively ) had created a system which increased the value of ivory on the international market, rewarded international smugglers and gave them the ability to control the trade and continue smuggling new ivory.

RS-232 was first introduced in 1962 by the Radio Sector of the EIA.

The electronic color code was developed in the early 1920s by the Radio Manufacturers Association ( now part of Electronic Industries Alliance ( EIA )), and was published as EIA-RS-279.

JEDEC was founded in 1958 as a joint activity between EIA and the National Electrical Manufacturers Association ( NEMA ) to develop standards for semiconductor devices.

Following EIA and FCC recommendations, the BE modulator was modified to meet BTSC specifications, and by August 1984 was in full-time use on WTTW.

The enzyme-linked immunosorbent assay ( ELISA ), or enzyme immunoassay ( EIA ), was the first screening test commonly employed for HIV.

The Electronic Industries Alliance ( EIA, until 1997 Electronic Industries Association ) was a standards and trade organization composed as an alliance of trade associations for electronics manufacturers in the United States.

With the changing names of the EIA, the naming convention of the standards was also adapted.

Later it was taken over by the EIA as EIA-232.

Unlike the 1130, which was a desk-like unit, the 1800 is packaged in 6 foot high, EIA Standard 19 inch racks, which are somewhat taller than the racks used by S / 360 systems of the same vintage, but the internal gates and power supplies were very much the same.

The previous version was a subset of EIA RS-274-D (" standard Gerber "); it is deprecated and is largely superseded by RS-274X.

* On 27-Aug-1980 the first edition of the Gerber Format: a subset of EIA RS-274-D ; plot data format reference book was published by Gerber Systems Corporation as a specification to drive their range of photoplotters.

The Environment Protection and Biodiversity Conservation Act 1999 ( EPBC ) superseded the Environment Protection ( Impact of Proposals ) Act 1974 and is the current central piece for EIA in Australia on a Commonwealth ( Federal ) level.

Produced for the Integrated Lake Management Project by Environmental Impact Assessment Centre of Finland, EIA Ltd. ( online PDF version )

Quantification of viral load can be determined by Plaque Assay, antigen capture enzyme immunoassay ( EIA ), ELISA and HA, and quantification of antibody levels by HAI and Neutralisation assay.

In May 2004, the Energy Information Administration ( EIA ) released a study comparing the Clear Skies Act with the Clean Air Planning Act of 2003 ( S. 843 ), introduced by Senator Thomas R. Carper, and the Clean Power Act of 2003 ( S. 366 ), introduced by Senator James Jeffords.

The following classes are defined by standard EIA / JESD8-6 from EIA / JEDEC:

The Electronic Industries Association ( EIA ) rating system, however, determines amplifier power by measuring a single channel at 1, 000 Hz, with a 1 % distortion level — 1 % clipping.