Help


[permalink] [id link]
+
Page "Music lesson" ¶ 5
from Wikipedia
Edit
Promote Demote Fragment Fix

Some Related Sentences

For and wind
For the purpose of wind or earthquake engineering, columns may be designed to resist lateral forces.
For example, flight instruments measure variables such as wind speed and altitude to enable pilots the control of aircraft analytically.
For example, in the Great Plains, it is estimated that wind erosion soil loss can be as much as 6100 times greater in drought years, than in wet years.
For example, in the solar wind together with ionized hydrogen, the particles interact with the Earth's magnetosphere giving rise to Birkeland currents and the aurora.
For the first time in history people did not have to rely on human or animal muscle, wind or water for power.
For planetary science, the magnetopause is the boundary between the planet ’ s magnetic field and the solar wind.
For smaller bodies particularly, light and stellar wind can cause significant perturbations to the attitude and direction of motion of the body, and over time can be significant.
For ships entering the estuary, the immediate loss of wind due to the cliffs was a particular hazard, often resulting in ships being swept onto the Doom Bar.
For yachts engaged on long-range cruising, wind -, water-and solar-powered generators can perform the same function.
For a sail in the solar wind one AU away from the Sun, the field strength required to resist the dynamic pressure of the solar wind is 50 nT.
For limited applications, Computational fluid dynamics ( CFD ) can increase or possibly replace the use of wind tunnels.
For example, the experimental rocket plane SpaceShipOne was designed without any use of wind tunnels.
For example, understanding the impact of wind on high-rise buildings, factories, bridges, etc.
For instance, the use of boundary layer wind tunnel modeling can be used as a credit for Leadership in Energy and Environmental Design ( LEED ) certification through the U. S. Green Building Council.
For accuracy, it is important to simulate the mean wind speed profile and turbulence effects within the atmospheric boundary layer.
For very large wind tunnels several meters in diameter, a single large fan is not practical, and so instead an array of multiple fans are used in parallel to provide sufficient airflow.
* For history of airborne wind energy aircraft, see High altitude wind power
For the most air to move through the net, the opening of the net must be facing the direction the wind is blowing.
For the plastic bag footage, Mendes used wind machines to move the bag in the air.
For example, a foehn wind is a type of down-slope wind which occurs in the downwind side of a mountain range.
: For the Roman god of the south wind, see Anemoi.

For and brass
For a thorough discussion of the valves and the compensation system, see the article on brass instruments.
For lead-free solder a slightly more aggressive cleaning, with brass shavings, can be used.
The metals suitable for wire, possessing almost equal ductility, are platinum, silver, iron, copper, aluminium and gold ; and it is only from these and certain of their alloys with other metals, principally brass and bronze, that wire is prepared ( For a detailed discussion on copper wire, see main article: Copper wire and cable.
: For example: The railway coach company was offered a contract to make 15 open-topped streetcars each month, using a design that included ornate brass foundry work, but very little of the metalwork needed to produce a covered rail coach.
For example, using molybdenum as a marker between copper and brass ( a copper-zinc alloy ), the region occupied by the brass will expand until it includes the molybdenum.
For example, the Finale is a combined fugue and sonata form movement: the first theme ( characterized by the downward leap of an octave ) appears in the exposition as a four-part fugue in the strings and the concluding theme of the exposition is presented first as a chorale in the brass, then as a four-part fugue in the development, and culminating in a double fugue with the first theme at the recapitulation ; additionally, the coda combines not only these two themes but also the main theme of the first movement.
For nearly 30 years, the firing of the brass cannon, or " signal gun ", was a 4th of July tradition at the Heinlein residence.
For quick-firing guns the charge is contained in a brass case to which is fitted a primer for igniting the charge.
For his fifth studio effort the emotional Feelings ( 1997 ), Byrne employed a brass orchestra called Black Cat Orchestra.
For example, the horn section in popular music typically includes both brass instruments and woodwind instruments.
For most of the nineteenth century, three water-powered mills produced lumber, calico, pasteboard boxes and brass fittings.
For instance, the coefficient of thermal expansion of a certain brass alloy, α = 18. 7 ppm /° C, may be expressed as 18. 7 ( µm / m )/° C, or as 18. 7 ( µin / in )/° C ; the numeric value representing a relative proportion does not change with the adoption of a different unit of measure .< ref > In the particular case of coefficient of thermal expansion, the change to inches ( one of the U. S. customary units ) is typically also accompanied by a change to degrees Fahrenheit.
For a few years he enjoyed a meteoric celebrity, including participating in a recording of William Walton's Façade with Edith Sitwell .< ref > Lambert's best known composition is The Rio Grande ( 1927 ) for piano and alto soloists, chorus, and orchestra of brass, strings and percussion.
For this tour, added to Wings ' stage act was a horn section consisting of Tony Dorsey, Howie Casey, Thaddeus Richard, and Steve Howard on horns, brass, and percussion.
For this reason, a single tone played by a bowed string instrument, brass instrument, or reed instrument does not necessarily exhibit inharmonicity.
For brazing copper and brass.
For brazing copper, brass, nickel alloys, Monel, medium carbon steels.
For brazing copper, brass, low-nickel alloys, Monel, medium and high carbon steels.
For brazing copper, brass, low-nickel alloys, medium and high carbon steels.
For brazing copper, brass, nickel alloys, Monel, medium and high carbon steels and chromium alloys.
For brazing copper, brass, low-nickel alloys, medium and high carbon steels.
For brazing copper, brass, low-nickel alloys, Monel, medium and high carbon steels.
For brazing copper, brass, nickel alloys, Monel, medium and high carbon steels and chromium alloys, cobalt alloys, tungsten alloys, and carbides.

0.682 seconds.