Help


[permalink] [id link]
+
Page "Density" ¶ 16
from Wikipedia
Edit
Promote Demote Fragment Fix

Some Related Sentences

Increasing and temperature
Increasing the temperature of a substance ( with some exceptions ) decreases its density by increasing the volume of that substance.
Increasing chain length furthermore tends to decrease chain mobility, increase strength and toughness, and increase the glass transition temperature ( T < sub > g </ sub >).
Increasing the temperature leads to a reduced probability of the colliding molecules capturing one another ( with more glancing collisions not leading to reaction as the higher momentum carries the colliding particles out of the potential well ), expressed as a reaction cross section that decreases with increasing temperature.
Increasing the temperature increases the pressure of these phase transitions.
Increasing the body temperature for such a large animal would take a long time.
* Increasing temperature as the principal driver of reactions.
Increasing temperature ionizes the gas, increasing the viscosity, and the instability increases and propagates throughout the disk.
Increasing the temperature or pressure of the absorbing material will also tend to increase the line width.
Increasing source temperature will also increase the local sonic velocity, thus allowing for increased mass flow rate.
Increasing the temperature of the steam into the superheat region is a simple way of doing this.
Increasing the distance the wax falls by 1 meter will drop the temperature about 5 degrees Fahrenheit ( 3 C ) at the risk of splatter.
Increasing the length of the hydrocarbon chain increases the Krafft temperature because it improves Van der Waals forces.
Increasing the concentration of the reactant particles or raising the temperature, thus bringing about more collisions and therefore many more successful collisions, increases the rate of reaction.
* Increasing maximum air temperature, south-easterly ( onshore ) winds, wind speeds in excess of 6 m / s, and rainfall, all result in warmer sea surface temperatures.
* Increasing sea surface temperature

Increasing and generally
Increasing processor power consumption led ultimately to Intel's May 2004 cancellation of its Tejas and Jayhawk processors, which is generally cited as the end of frequency scaling as the dominant computer architecture paradigm.
Increasing the base cases to lists of size 2 or less will eliminate most of those do-nothing calls, and more generally a base case larger than 2 is typically used to reduce the fraction of time spent in function-call overhead or stack manipulation.
Increasing the safety factor generally increases the cost of manufacture and decreases the likelihood of a failure.
Increasing ecological problems, repeated disease outbreaks, and pressure and criticism from both NGOs and consumer countries led to changes in the industry in the late 1990s and generally stronger regulation by governments.
Increasing ecological problems, repeated disease outbreaks, and pressure and criticism from both NGOs and consumer countries led to changes in the industry in the late 1990s and generally stronger regulation by governments.
Increasing irregularity of this respiratory rate generally is a sign that the patient will enter into coma.

Increasing and decreases
) Increasing the pressure on an object decreases the volume of the object and therefore increase its density.
Increasing the iron content decreases the pressure of the phase transition and narrows the wadsleyite stability field.
Increasing or decreasing the light by twelve points increases or decreases the exposure by a factor of two.
Many common beliefs about social organization, such as " Increasing police decreases crime ", or " corruption can be combatted by legislation " imply a first-order mechanism.
Increasing angle of attack is associated with increasing lift coefficient up to the maximum lift coefficient, after which lift coefficient decreases.
Increasing the ktup value decreases number of background hits that are found.
* Increasing carbonyl groups on the 1, 3-dipole decreases reactivity by ground state stabilization.
Increasing the thermal conductance raises the speed, but decreases sensitivity.
Increasing the length of the chain decreases the size of the table.
Increasing the area of the neck increases the inertia of the air proportionately, but also decreases the velocity at which the air rushes in and out.

Increasing and density
Increasing the pressure always increases the density of a material.
Increasing the pressure drives the water into the higher density phase, which causes melting.
Increasing settlement density in buildings ( and closer distances between buildings ) is usually a response to high ground prices resulting from many people wanting to live close to work or similar attractors.
Increasing the polygonal density will minimize the problem, but not eliminate it.
Increasing transmit power can increase energy density.
Increasing gas pressure improves the energy density by volume, making for smaller, but not lighter container tanks ( see pressure vessel ).
Increasing storage density of a medium almost always improves the transfer speed at which that medium can operate.
Increasing salinity by one kg / m < sup > 3 </ sup > results in an increase of seawater density of around 0. 7 kg / m < sup > 3 </ sup >.

Increasing and there
Increasing the applied voltage increases the rate of evaporation, so at some point there may be insufficient halogen and the lamp goes black.
Increasing reliability of the key by storing multiple copies lowers confidentiality by creating additional attack vectors ; there are more opportunities for a copy to fall into the wrong hands.
Increasing number of tourists are coming to Budva with their own car, so there is overwhelming demand for parking space around the town center.
Increasing the distance between the wheels and cabin, as is done on the South African Casspir personnel carrier, is an effective technique although there are mobility and ease of driving problems with such a vehicle.
Increasing speeds were also a concern at the Österreichring ; during the final Grand Prix there in 1987 pole-sitter Nelson Piquet's time for the 5. 942km ( 3. 692mi ) of 1: 23. 357 set an average speed record for the circuit of 159. 457 mph ( 255. 756 km / h ).

0.397 seconds.