There are three factors which affect the design and the shape of the coil-they are: Inferior strain tolerance, thermal contraction upon cooling and lorentz forces in a charged coil.

The heat loads that must be removed by the cooling system include conduction through the support system, radiation from warmer to colder surfaces, AC losses in the conductor ( during charge and discharge ), and losses from the cold – to-warm power leads that connect the cold coil to the power conditioning system.

It featured wire wheels ( unlike carriages ' wooden ones ) with a four-stroke engine of his own design between the rear wheels, with a very advanced coil ignition and evaporative cooling rather than a radiator.

The cold liquid-vapor mixture then travels through the evaporator coil or tubes and is completely vaporized by cooling the warm air ( from the space being refrigerated ) being blown by a fan across the evaporator coil or tubes.

* In cooling mode the cycle is similar, but the outdoor coil is now the condenser and the indoor coil ( which reaches a lower temperature ) is the evaporator.

Solid core coil design result in a more efficient transfer of electrical energy into a magnetic field, with a substantially reduced amount of energy dissipated as heat, and so can be operated under more aggressive duty cycles often mandated in therapeutic protocols, without treatment interruption due to heat accumulation, or the use of an accessory method of cooling the coil during operation.

Some drivers include provisions for better cooling ( e. g., vented magnet pole pieces, dedicated heat conduction structures ) to reduce increased coil / magnet / frame temperatures during operation, especially high power level conditions.

On those systems, after the moisture is removed from the make up air, a cooling coil is used to lower the temperature to the desired level.

One major advantage of this type of system is that it also enables easy installation of central air conditioning by simply adding a cooling coil at the exhaust of the furnace.

During cooling, the indoor coil is an evaporator removing heat from the indoor air and transferring it to the outdoor coil where it is rejected to the outdoor air.

Water cooling systems in which water is cooled directly by the evaporator coil of a phase change system are able to chill the circulating coolant below the ambient air temperature ( impossible with a standard heat exchanger ) and, as a result, generally provide superior cooling of the computer's heat-generating components.

Evaporatively cooled machines are similar, except they implement a mist of water over the condenser coil to aid in condenser cooling, making the machine more efficient than a traditional air-cooled machine.

When a door is opened, either in the refrigerator or the freezer, the fan in some units stops immediately to prevent excessive frost build up on the freezer's evaporator coil, because this coil is cooling two areas.

The Fordson used the Model T coil magneto system ; and water and oil pumps were eliminated in favor of the simpler thermosiphon cooling and splash lubrication.

Inside view of an induction cooker: the large copper coil forms the magnetic field, a cooling fan is visible below it, and power supply and line filter surround the coil

Some coils are made with surface-sealed bobbin and collar materials so they may be immersed in a ferrofluid which assists in cooling the coil, by conducting heat away from the coil and into the magnet structure.

This cooling does not change the avocado in any way, it just delays the natural softening of the fruit until a grovelike temperature ( room temperature ) is restored.

Fortunately, it is the FHA which has arrived at this conclusion, for it means that cooling equipment of all kinds may now be included in a mortgage, and thus acquired with a minimum of financial stress.

We know, too, that health is never harmed by summer cooling.

If your house is to have a forced warm air system, cooling can be a part of it.

For cooling, chilled water is circulated instead of hot water.

One of the more remarkable of the new cooling systems is one that can be switched to heating.

The body is a heat machine, and 20 to 25 guests can easily double your cooling load.

A very rough rule of thumb is that, under favorable conditions, you'll need 15 BTU's of cooling for every square foot of your house.

It is generally an inaccurate method of rating, for the horsepower is that of the compressor motor, and many other components beside it determine how much cooling you'll get.

Reducing humidity is often as important as cooling.

The way a house is set on its lot can therefore influence how much cooling you're going to need.

In plasma generators as currently commercially available for industrial use or as high temperature research tools often more than 50% of the total energy input is being transferred to the cooling medium of the anode.

It is apparent from the above and from experimental evidence that the cooling requirements for the anode of free burning arcs are large compared with those for the cathode.

It is absurd of course to say that that one exclamation estranged me from the family I considered my very own, but there it hangs, a cooling void that broke our close connection with each other.

Solid yellow arsenic is produced by rapid cooling of arsenic vapor,.

Black antimony is formed upon rapid cooling of vapor derived from metallic antimony.

Adiabatic cooling occurs when the pressure of a substance is decreased as it does work on its surroundings.

Adiabatic cooling occurs in the Earth's atmosphere with orographic lifting and lee waves, and this can form pileus or lenticular clouds if the air is cooled below the dew point.

One technique used to reach very low temperatures ( thousandths and even millionths of a degree above absolute zero ) is adiabatic demagnetisation, where the change in magnetic field on a magnetic material is used to provide adiabatic cooling.

The isolation of Antarctica by the current is credited by many researchers with causing the glaciation of Antarctica and global cooling in the Eocene epoch.

British architects Brenda and Robert Vale have said that, as of 2002, " It is quite possible in all parts of Australia to construct a ' house with no bills ', which would be comfortable without heating and cooling, which would make its own electricity, collect its own water and deal with its own waste ... These houses can be built now, using off-the-shelf techniques.

If enough electric power is available, cooling can be provided by conventional air conditioning using a heat pump.

The reactors are located inside the rectangular containment building s towards the front of the cooling tower s.

Buildings with data centres inside them are often easy to recognize due to the amount of cooling equipment located outside or on the roof.

Although the nearby community of Rainier was better known as the home of the Trojan Nuclear Power Plant, whose cooling tower was imploded in May 2006, the plant was in fact located less than a mile from Prescott.

The park is located on Martin Creek Lake, constructed to provide cooling water for a lignite-fired power plant.

Air-to-liquid intercoolers are by far the most common form of intercooler found on marine engines, given that a limitless supply of cooling water is available and most engines are located in closed compartments where obtaining a good flow of cooling air for an air-to-air unit would be difficult.

Four wires come to the centrally-located thermostat from the main heating / cooling unit ( usually located in a closet, basement, or occasionally in the attic ): One wire usually red, supplies 24 volts AC power to the thermostat, while the other three supply control signals from the thermostat, usually white for heat, yellow for cooling, and green to turn on the blower fan.

The thermostat should be located away from the room's cooling or heating vents or device, yet exposed to general airflow from the room ( s ) to be regulated.

The lake provides cooling water for the Thomas C. Ferguson Power Plant that is located on its shores.

The centre is located on an ecologically rich site next to the Pumphouse cooling ponds, which have become a haven for wildlife since the closure of the steelworks.

Activation of the rear spoiler will allow the air pressure generated at the back of the vehicle to force air into the cooling ducts located at either end of the spoiler which become uncovered upon application of it.

However, if at any time the building needs to be cooled to maintain comfortable temperatures, the heat lost from a hot water tank located in the conditioned space must be removed by the air conditioning system, thus requiring larger cooling capacity and energy usage.

When the engine is cool or even at normal operating temperature, the fan clutch partially disengages the engine's mechanically-driven radiator cooling fan, generally located at the front of the water pump and driven by a belt and pulley connected to the engine's crankshaft.

Server cooling fans in ( 1 U ) enclosures are usually located in the middle of the enclosure, between the hard drives at the front and passive CPU heat sinks at the rear.

The Catawba Nuclear Generating Station is located on the south-western part of the lake, and draws its cooling water from the lake.

Allen Steam Station located on the northern part of the lake ( west of Charlotte ) also draws its cooling water from the lake.

The torus is composed of three sections: an outer, " warm " torus that resides just outside Io's orbit ; a vertically extended region known as the " ribbon ", composed of the neutral source region and cooling plasma, located at around Io's distance from Jupiter ; and an inner, " cold " torus, composed of particles that are slowly spiraling in toward Jupiter.

The methods involve heating polycrystalline material above its melting point and slowly cooling it from one end of its container, where a seed crystal is located.

It is not located nearby a river and therefore must take its cooling water from underground.

If the probe is located over a pit the cantilever will push it into the hole, increasing the surface area in contact with the sled, and in turn increasing the cooling as heat leaks into the sled from the probe.

The Company ’ s breeding farms, located in numerous provinces across the country, practice good farm management and use the evaporative cooling system.

A BWR's containment consists of a drywell where the reactor and associated cooling equipment is located and a wetwell.

This way, a controlled portion of the dry and fresh air coming from the dynamic cooling element located within the freezer can reach the refrigerator.