Help


[permalink] [id link]
+
Page "learned" ¶ 1303
from Brown Corpus
Edit
Promote Demote Fragment Fix

Some Related Sentences

polyester and urethane
These are usually latex, polyester, urethane or epoxy compounds which are applied in liquid form to provide a completely seamless floor covering.
A tarpaulin, colloquially tarp, is a large sheet of strong, flexible, water-resistant or waterproof material, often cloth such as canvas or polyester coated with urethane, or made of plastics such as polyethylene.
Currently there are 4 different types of coverstocks for ten-pin bowling balls: polyester, urethane, reactive resin and particle resin.
Just like polyester bowling balls, urethane bowling balls have no pores in the ball.

polyester and foam
In one-shot, the isocyanate, polyester or polyether resin, catalyst, and other additives are mixed directly and a foam is produced immediately.
Commercial production of flexible polyurethane foam began in 1954, based on toluene diisocyanate ( TDI ) and polyester polyols.
Modern surfboards are made of polyurethane or polystyrene foam covered with layers of fiberglass, cloth and polyester or epoxy resin.
Another method of making boards is using epoxy resin and prolapse polystyrene foam, instead of polyester resin and polyurethane foam.
The bus station at Spaarne Hospital in Hoofddorp is the world's biggest structure built entirely from synthetic materials: factory-cut polystyrene foam with a polyester skin.
However, per volume and weight of fabric, the best-insulating dry polyester fabrics are more effective than foam, because their air pockets are smaller.
Recent advances in technology have brought about new mats made using closed cell, cross-linked polyethylene foam covered in vinyl backed with non-woven polyester.
Quilted sleepers using polyester foam as insulation were also made in the 1950s.
The hull is composed of glass reinforced polyester and foam sandwich.

polyester and is
A relative newcomer in outdoor signs is Mylar polyester film, now used as a printed overlay for trans-illuminated signs ( see below ).
The copy itself, including any text or illustrations, is reproduced in full color directly on a thin Mylar polyester film by a photo screen process.
Whether hand laid or built in a mould, FRP boats usually have an outer coating of gelcoat which is a thin solid colored layer of polyester resin that adds no structural strength, but does create a smooth surface which can be buffed to a high shine and also acts as a protective layer against sunlight.
Cold molding is similar to FRP in as much as it involves the use of epoxy or polyester resins, but the structural component is wood instead of fibreglass.
Plastics are made from fossil hydrocarbons, and carbon fiber, made by pyrolysis of synthetic polyester fibers is used to reinforce plastics to form advanced, lightweight composite materials.
Their main use is to dye polyester but they can also be used to dye nylon, cellulose triacetate, and acrylic fibres.
Crimplene is a thick polyester yarn used to make a fabric of the same name.
The rubber dome switches, most commonly referred to as polydomes, are formed polyester domes where the inside bubble is coated in graphite.
This is the case, for example, in the polymerization of PET polyester.
The epidermis of all aerial organs, but not roots, is covered with a cuticle made of the polyester cutin with a superficial layer of waxes.
This is true, however the polyester just as frequently traps these elements next to the material it is intended to protect.
Therefore, it is necessary to either stack polyester protected photographs horizontally within a box, or bind them in a three ring binder.
Screen printing is also a stencil method of print making in which a design is imposed on a screen of polyester or other fine mesh, with blank areas coated with an impermeable substance, and ink is forced into the mesh openings of the mesh by the fill blade or squeegee and onto the printing surface during the squeegee stroke.
The most popular mesh in general use is made of polyester.
However, the film loaded in a Single-8 cartridge has exactly the same dimensions as Super 8 ( though it is made of a thinner & stronger polyester base, rather than the acetate base of Super 8 film ), and can be viewed in any Super 8 projector after processing.
As of 2011, the Steinway New York factory is producing high polish polyester finish pianos in addition to satin lustre lacquer finish.
The concave ( inner ) surface of the lens is then polished with some fine abrasive paste, oil, and a small polyester cotton ball turned at high speeds.
Once the hole for the rebar is drilled, cartridges of polyester resin are installed in the hole.
In most cases, two fabric layers surround a middle layer of batting ( cotton, polyester, silk, wool or combinations of fibers ) which is a lighter, insulating layer.

polyester and generally
* High-tensile, Slick Strings, generally made from polyester and cotton, are added by some players to improve sleep times ( thinner string touches less of the yo-yo gap ) and for better looping ( low friction string performs " faster " and will not break as easily ).
Semi-submersible platforms can be moved from place to place ; can be ballasted up or down by altering the amount of flooding in buoyancy tanks ; they are generally anchored by combinations of chain, wire rope or polyester rope, or both, during drilling or production operations, or both, though they can also be kept in place by the use of dynamic positioning.
Gym shorts are generally made of cotton, spandex, polyester, or another synthetic fiber with a cord sewn in that can be tied at the front to tighten the waist.
The pile is generally either made from wool or a manmade fibre such as polypropylene, nylon or polyester and usually consists of twisted tufts which are often heat-treated to maintain their structure.
Venezuelan or Jungle hammocks made today are generally of breathable nylon or polyester, and use dacron or similar non-stretch suspension lines.
Four-in-hand ties are generally made from silk or polyester.
Braided ropes are generally made from nylon, polyester, polypropylene or high performance fibers such as Dyneema, Technora or Vectran.
The two most common materials are a mix between cotton and polyester ( many of these shirts are meant for supporter use, though they can be used in a rugby game ), and pure polyester ( these shirts are generally designed for game use ).
It is generally about 30 % heavier than aluminium and somewhat more heavy than polyester.
Microfiber products used for consumer cleaning are generally constructed from split conjugated fibers of polyester and polyamide.
Eyes are generally made of wood or glass, and the stuffing is commonly wood shavings or polyester fibers.
Boardshorts are designed to be quick-drying, and are generally made from smooth polyester or nylon material.
This type of ball is also generally used like a polyester ball but will have a better reaction as it rolls down the lane.
14 to 18 ounce polyester laminated vinyl is generally used in all folding mat applications.
The side of the beadlock closest to the tread, the " case ", has a layer of thick fabric, generally polyester, which keeps the beadlock from inflating too far up into the tire.

0.196 seconds.