Typical examples of binary operations are the addition (+) and multiplication (×) of numbers and matrices as well as composition of functions on a single set.

Typical implementations will use some subset of that API set depending on the additional profiles supported.

Typical operation might be to establish rough composition, set the working aperture for metering, return to full aperture for a final check of focus and composition, and focusing, and finally, return to working aperture just before exposure.

Typical systems can be set to display the sky at any point in time, past or present, and often to show the night sky as it would appear from any point of latitude on Earth.

Image: Semaforoencendido. jpg | Typical set of traffic lights in Spain

Typical set of three metal tire levers of the type used on bicycles

Typical operations that may be provided by a static set structure S are:

Typical gradient-echo EPI uses two gradient coils within a slice, and turns on first one coil and then the other, tracing a set of lines in k-space.

Typical 20 ' x20 ' High Peak Frame Tent set up at Events Party & Tent Rentals for Demonstration

Typical causes are when the program counter is set to an incorrect address or a buffer overflow overwrites a portion of program code due to an earlier bug.

Typical Electrical Consumption ( TEC ) of a product family are measured and reported against an allowance set by the maximum throughput of the device.

Typical of such attacks were the one commanded out by Newcombe and Joyce who on the night of July 6 / 7, 1917 when they had planted over 500 charges on the Hejaz railroad, which all set up off at about 2am.

Typical gig could see them playing around four hours with one set of rock.

Typical installation tools ( from lowest to highest price ) are hand set, manual squeezer, pneumatic squeezer, kick press, impact riveter, and finally PLC-controlled robotics.

Typical definitions set forth in a bandplan are:

Typical tasks include printing or performing statistical analysis, and may just require the user / programmer to identify the data set.

Typical boundary conditions set the values of the observable parameters appropriately at the surface () and center () of the star:, meaning the pressure at the surface of the star is zero ;, there is no mass inside the center of the star, as required if the mass density remains finite ;, the total mass of the star is the star's mass ; and, the temperature at the surface is the effective temperature of the star.

Typical set up for manual column chromatography. The software controlling an automated system will coordinate the components, allow a user to only collect the fractions that contain their target compound ( assuming they are detectable on the system's detector ) and help the user to find the resulting purified material within the fraction collector.

Typical examples of traditional prison films set in the U. S. include: The Concrete Jungle ( 1982 ), and Chained Heat ( 1983 ) with Linda Blair and Sybil Danning, Cell Block Sisters ( 1995 ), Caged Hearts ( 1995 ), Bad Girls Dormitory ( 1985 ), Under Lock & Key, and Caged Fear ( 1991 ).

Typical instrumentation for jazz ensembles will include trumpets, trombones, alto, tenor and baritone saxophones, a drum set ( often called a ' trap set ',) guitar, bass guitar, piano, clarinet and often, a vibraphone.

Typical set of garden quoits

Typical quests involve killing a set number of creatures or collecting a list of specific items.

Typical hub / disc assembly runout specifications for passenger vehicles are around 0. 0020 " or 50 micrometers.

Typical considerations include the length of the dive, water contamination, space constraints and vehicle access for support vehicles.

Typical uses include cave diving and technical diving where the vehicles help move bulky equipment and make better use of the limited underwater time imposed by the decompression requirements of deep diving.

Typical base vehicles are lighter-duty and / or smaller-engined variants of the same vehicles used for overcab designs.

Typical base vehicles are the same as for the coachbuilt designs, above.

Typical scenery is beautiful and it crosses the spectacular Macquarie Pass, with many hairpin bends and many steep gradients, unsuitable for big trucks and other articulated vehicles.

Typical use of the facility was for businesses e. g. taxi or delivery firms needing mobile communications to vehicles ; taxis, trucks or vans.

Typical modifications to vehicles for this kind of travel are the addition of extra fuel tanks, roof rack tents, and elaborate storage systems in the back for food, water / drinking, spare parts, tools and other cargo.

Typical applications of yardsticks are for building furniture, vehicles and houses.

Typical traveller sites might have anywhere from 5 to 30 vehicles on them, including trailers and caravans as well as buses, vans and horseboxes converted to live in.

Typical warning placed in the fuel filler in U. S. vehicles regarding the capability of using up to E10 and for not using blends between E20 to E85

Typical targets included trucks and other such vehicles.

Typical hoses used for filling of the potable water tanks in recreational vehicles are similar to garden hoses but are made of nonporous materials that are less likely to collect bacteria or affect the water's taste.

Typical touch: She sold a $10,000 morning light mink to Sportsman Freddie Wacker for his frau, Jana Mason, also an ex-singer.

Typical landscape for the Antarctic Peninsula area, with fjords, high coastal mountains and islands.

Typical values of V range from around 20 for very dense flint glass, around 30 for polycarbonate plastics, and up to 65 for very light crown glass, and up to 85 for fluor-crown glass.

Typical properties calculated for a flow field include velocity, pressure, density and temperature as a function of spatial position and time.

Typical of his satire and cynical humour, the book included a discourse on Parkinson's Law of Triviality ( debates about expenses for a nuclear plant, a bicycle shed, and refreshments ), a note on why driving on the left side of the road ( see road transport ) is natural, and suggested that the Royal Navy would eventually have more admirals than ships.

* Typical modern six-string classical guitars are 48 – 54 mm wide at the nut, compared to around 42 mm for electric guitars.

Typical bore size for low-speed engines ranges from approximately.

Typical training for a North American endocrinologist involves 4 years of college, 4 years of medical school, 3 years of residency, and 2 years of fellowship.

Typical equipment for a floorball player consists of a stick, a pair of shorts, a shirt, socks, and indoor sport shoes.

Typical monthly calendars that include phases of the moon may be off by one day if intended for use in a different time zone.

Typical adult limits for these hormones are: TSH ( units ): 0. 45-4. 50 uIU / mL ; T4 Free / Direct ( nanograms ): 0. 82-1. 77 ng / dl ; and T3 ( nanograms ): 71-180 ng / dl.

Typical rules concern restrictions on the availability of funds to retail investors ( Dublin ), protection of client confidentiality ( Luxembourg ) and the requirement for the fund to be independent of the fund manager.

Typical of her aggressive style was her victory against GM Georgi Kacheishvili in which she sacrificed her queen for the attack.

Typical and New South Wales koala weights are for males and for females.

Typical operating currents for such devices begin at 350 mA.

Typical input and output devices include switches, relays, solenoids, LEDs, small or custom LCD displays, radio frequency devices, and sensors for data such as temperature, humidity, light level etc.

Typical fission events release about two hundred million eV ( 200 MeV ) of energy for each fission event.

Typical conditions for the first stage, which contribute to an overall yield of about 96 %, are:

Typical radiosity methods only account for light paths of the form LD * E, i. e., paths which start at a light source and make multiple diffuse bounces before reaching the eye.

Typical concentration values fall somewhere in this range and are tailored to produce the desired properties in the device that the semiconductor is intended for.