The physical properties, such as density, reactivity, Young's modulus, and electrical and thermal conductivity, of an alloy may not differ greatly from those of its elements, but engineering properties such as tensile strength and shear strength may be substantially different from those of the constituent materials.

It has exceptional flexural rigidity ( Young's modulus 287 GPa ) and a reasonably high melting point.

* Elastic properties of the elements ( data page ) — Young's modulus, Poisson ratio, bulk modulus, shear modulus

* Young's modulus, a specific elastic modulus

* E is the Young's modulus of the material the fork is made from in pascals.

Young described the characterization of elasticity that came to be known as Young's modulus, denoted as E, in 1807, and further described it in his Course of Lectures on Natural Philosophy and the Mechanical Arts.

However, the first use of the concept of Young's modulus in experiments was by Giordano Riccati in 1782 – predating Young by 25 years.

The Young's modulus relates the stress ( pressure ) in a body to its associated strain ( change in length as a ratio of the original length ); that is, stress

The pascal ( symbol: Pa ) is the SI derived unit of pressure, internal pressure, stress, Young's modulus and tensile strength, named after the French mathematician, physicist, inventor, writer, and philosopher Blaise Pascal.

where D is the density, E is Young's modulus and d is the maximum density of iron.

Carbon fibers derived from Polyacrylonitrile ( PAN ) are turbostratic, whereas carbon fibers derived from mesophase pitch are graphitic after heat treatment at temperatures exceeding 2200 C. Turbostratic carbon fibers tend to have high tensile strength, whereas heat-treated mesophase-pitch-derived carbon fibers have high Young's modulus ( i. e., high stiffness or resistance to extension under load ) and high thermal conductivity.

where ν is Poisson's ratio, is Young's modulus, is the beam length and is the cantilever thickness.

The orientation of the polymer chains is responsible for the high strength and stiffness of biaxially oriented PET film, which has a typical Young's modulus of about 4 GPa.

Metglas 2605SC also exhibits a very strong ΔE-effect with reductions in the effective Young's modulus up to about 80 % in bulk.

Young's modulus, also known as the tensile modulus, is a measure of the stiffness of an elastic material and is a quantity used to characterize materials.

The tangent modulus of the initial, linear portion of a stress-strain curve is called Young's modulus.

In anisotropic materials, Young's modulus may have different values depending on the direction of the applied force with respect to the material's structure.

It is also commonly called the elastic modulus or modulus of elasticity, because Young's modulus is the most common elastic modulus used, but there are other elastic moduli measured, too, such as the bulk modulus and the shear modulus.

The early deaths of Young and Champollion, in 1829 and 1832, did not put an end to these disputes ; the authoritative work on the stone by the British Museum curator E. A. Wallis Budge, published in 1904, gives special emphasis to Young's contribution by contrast with Champollion's.

The county is named in memory of Lewis Stafford, captain of Company E, First Kansas Infantry, who was killed at the Battle of Young's Point, Madison Parrish, Louisiana, June 7, 1863.

For instance, the Young's Modulus E < sub > n </ sub > of sintered iron powders remains insensitive to sintering time, alloying, or particle size in the original powder, but depends upon the density of the final product:

Soon after Young's death in 1877, the Adam – God doctrine fell out of favor within mainstream Mormonism, and was replaced by a theology more similar to that of Orson Pratt, as codified by turn-of-the century Mormon theologians James E. Talmage, B. H. Roberts and John A. Widtsoe.

:< var > E </ var > is the Young's modulus ( modulus of elasticity )

For homogeneous isotropic materials simple relations exist between elastic constants ( Young's modulus E, shear modulus G, bulk modulus K, and Poisson's ratio ν ) that allow calculating them all as long as two are known:

where E is the Young's modulus and is Poisson's ratio.

In 1988, he did impressions of Prince Charles which featured on the Urban label release " Don't Believe the Hype " by acid house artist Mista E. The impressions were also used as jingles in 1988-89 on the BBC Radio 1 FM Friday night dance music show Jeff Young's Big Beat.

: E – Young's modulus

Hence for this region ' where this time E refers to the Young's Modulus for compression.

After his suicide, Young's role in NYC management was assumed by Alfred E. Perlman, who had been working with the NYC under Young since 1954.

After Young's death, his role in NYC management was assumed by his protégé Alfred E. Perlman.

* Young's modulus (< var > E </ var >) describes tensile elasticity, or the tendency of an object to deform along an axis when opposing forces are applied along that axis ; it is defined as the ratio of tensile stress to tensile strain.

: E is the ( tensile ) elastic modulus ( or Young's modulus ),

where E is the Young's modulus of the material and γ is the surface energy density of the material.

where E is the Young's modulus, ν is Poisson's ratio, and K < sub > I </ sub > is the stress intensity factor in mode I. Irwin also showed that the strain energy release rate of a planar crack in a linear elastic body can be expressed in terms of the mode I, mode II ( sliding mode ), and mode III ( tearing mode ) stress intensity factors for the most general loading conditions.

The CNTs remain in the OFF or high resistance state due to the high mechanical stiffness ( Young's Modulus 1 TPa ) with an activation energy ( E < sub > a </ sub >) much greater than 5 eV.

Steel spiral strand cables have a Young's modulus, E of 150 ± 10 kN / mm² ( or 150 ± 10 GPa ) and come in sizes from 3 to 90 mm diameter.

where U is the modulus of resilience, σ is the yield strength, and E is the Young's modulus.

At the time it was generally taken that the strength of a material was E / 10, where E was the Young's modulus for that material.

The magazine has since excised the article from subsequent editions of the Illustrated History book ; a transcription of it can be found at the link below ( despite his scathing view of Young's career, Marsh gave the album the highest possible rating ).

The double-slit experiment, sometimes called Young's experiment ( after Young's interference experiment ), is a demonstration that matter and energy can display characteristics of both waves and particles, and demonstrates the fundamentally probabilistic nature of quantum mechanical phenomena.

Furthermore, the idea can be traced back to a paper by Leonhard Euler published in 1727, some 80 years before Thomas Young's 1807 paper.

The relationship between forces / moments and strains / curvatures for an isotropic material can be described with the following material properties: Young's Modulus, the shear Modulus and the Poisson's ratio, in relatively simple mathematical relationships.

The Young's modulus of a material can be used to calculate the force it exerts under specific strain.

Young's modulus can vary somewhat due to differences in sample composition and test method.

In terms of Young's modulus and Poisson's ratio, Hooke's law for isotropic materials can then be expressed as

This relationship only applies in the elastic range and indicates that the slope of the stress vs. strain curve can be used to find Young's modulus.

In quantum mechanics, a single wave can interfere with itself, but this is due to its quantum behavior and is still an addition of two waves ( see Young's slits experiment ).

For instance, in Young's Double-slit experiment electrons can be used in the place of light waves.

For the special case of unconstrained uniaxial tension or compression, Young's modulus can be thought of as a measure of the stiffness of a material.

* In Batman: Arkham Asylum, Ra's al Ghul's body can be found zipped up in a body bag in the morgue part of Arkham Mansion near Dr. Penny Young's office, which serves as the answer to the riddle " It'll be a cold day in hell when this Ghul rises again .".

Don't Bet on Women ( 1931 ) was a non-musical drawing room comedy in which playboy Edmund Lowe bets his happily married friend Roland Young that he can seduce Young's wife ( MacDonald ).

Both of Elizabeth Young's volumes of literary criticism from this period deal extensively and exclusively with this range of authors and the contexts in which their works can be viewed.

From these measurements properties such as Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics can be determined.

Mathematically, the modulus of resilience can be expressed by the product of the square of the yield stress divided by two times the Young's modulus.

Young's most famous advertisement slogan was " A hog can cross the country without changing trains-but you can't.

It can be used to measure Young's modulus, Shear modulus, Poisson's ratio and damping coefficient in a non destructive way.

Extensive notes on the remastering process can be found on Young's website.

Young's inequality for products can be used to prove Hölder's inequality.

This form of Young's inequality is a special case of the inequality of weighted arithmetic and geometric means and can be used to prove Hölder's inequality.

An example application is that Young's inequality can be used to show that the heat semigroup is a contraction semigroup using the L < sup > 2 </ sup > norm.