[permalink] [id link]
* Configuration audits are broken into functional and physical configuration audits.
from
Wikipedia
Some Related Sentences
Configuration and audits
Configuration audits verify the system and subsystem configuration documentation complies with their functional and physical performance characteristics before acceptance into an architectural baseline.
# Configuration audits
The Configuration management system oversees the life of the CIs through a combination of process and tools by implementing and enabling the fundamental elements of identification, change management, status accounting, and audits.
Configuration and are
Configuration APIs provide programmatic control of administrative functions of the call centre platform which are typically accessed by a human administrator through a Graphical User Interface ( GUI ).
There are also rare cases of systems, e. g. the Field-Reversed Configuration, predicted by MHD to be unstable, but which are observed to be stable, probably due to kinetic effects.
CM for information assurance, sometimes referred to as Secure Configuration Management, relies upon performance, functional, and physical attributes of IT platforms and products and their environments to determine the appropriate security features and assurances that are used to measure a system configuration state.
Configuration and services that are vulnerable to IP spoofing:
Profiles are subsets of configurations, of which there are currently two: the Connected Limited Device Configuration ( CLDC ) and the Connected Device Configuration ( CDC ).
The Connected Device Configuration is a subset of Java SE, containing almost all the libraries that are not GUI related.
In the Application Layer ( Layer 7 ), the cable modem supports certain protocols that are used for management and maintenance, notably Dynamic Host Configuration Protocol ( DHCP ), SNMP, and TFTP.
* Configuration auditing-Ensuring that configurations contain all their intended parts and are sound with respect to their specifying documents, including requirements, architectural specifications and user manuals.
Dynamic Host Configuration Protocol ( DHCP ) and Domain Name System ( DNS ) servers are optional and are only used if they are available on the network.
The core application programming interfaces are defined by the underlying Connected Limited Device Configuration system.
The core APIs are defined by the underlying Configuration CLDC.
Configuration files are typically stored in ~/ GNUstep /.
Configuration spaces are related to braid theory, where the braid group is considered as the fundamental group of the space.
Excited states are often calculated using Coupled cluster, Møller – Plesset perturbation theory, Multi-configurational self-consistent field, Configuration interaction, and Time-dependent density functional theory.
The experiments are the Cement Mixing Experiment ( CME ), the Configuration Stability of Fluid Experiment ( CSFE ), the Computer Compact Disc Evaluation Experiment ( CDEE ) and the Asphalt Evaluation Experiment ( AEE ).
" Configuration " refers to how lesions are locally grouped (" organized "), which contrasts with how they are distributed ( see next section ).
Configuration and hardware changes that are a response of system deterioration.
Configuration and into
Blatty then developed The Ninth Configuration into a screenplay for Columbia Pictures ( Blatty did not want to work with Warner Bros. as he had sued that studio over his proper share of profits from The Exorcist ).
* 1975: Professor Pressor's work eventually grew into a commercially available product called Change and Configuration Control ( CCC ) which was sold by the SoftTool corporation.
Configuration was not automatic-free UMBs had to be identified by hand, manually included in the line that loaded EMM386 from CONFIG. SYS, and then drivers and so on had to be manually loaded into UMBs from CONFIG. SYS and AUTOEXEC. BAT.
System Center Configuration Manager ( SCCM ) interoperates with WSUS, and is able to import third party security updates into the product.
Configuration and functional
Configuration management ( CM ) is a process for establishing and maintaining consistency of a product ’ s performance and functional and physical attributes with its requirements, design and operational information throughout its life.
* Configuration Verification and Audit: An independent review of hardware and software for the purpose of assessing compliance with established performance requirements, commercial and appropriate military standards, and functional, allocated, and product baselines.
Compatible with all PC / XT functional units: 8284, 8288, 8237, 8259, 8254, 8255, DRAM control, SRAM control, Keyboard control, Parity Generation and Configuration registers.
Configuration and configuration
If IPv6 stateless address autoconfiguration is unsuitable for an application, a network may use stateful configuration with the Dynamic Host Configuration Protocol version 6 ( DHCPv6 ) or hosts may be configured statically.
Set of hyperfrequency tubes ( 84 GHz and 118 GHz ) for plasma heating by electron cyclotron waves on the Tokamak à configuration variable | Tokamak à Configuration Variable ( TCV ).
* Configuration Status Accounting: Includes the process of recording and reporting configuration item descriptions ( e. g., hardware, software, firmware, etc.
* Configuration identification is the process of identifying the attributes that define every aspect of a configuration item.
* Configuration change control is a set of processes and approval stages required to change a configuration item's attributes and to re-baseline them.
* Configuration status accounting is the ability to record and report on the configuration baselines associated with each configuration item at any moment of time.
Configuration is typically stored in a configuration PROM or EEPROM.
Service asset and configuration management is primarily focused on maintaining information ( i. e., configurations ) about Configuration Items ( i. e., assets ) required to deliver an IT service, including their relationships.
Configuration management is the management and traceability of every aspect of a configuration from beginning to end and it includes the following key process areas under its umbrella:
The Application Configuration Access Protocol ( ACAP ) is a protocol for storing and synchronizing general configuration and preference data.
* Configuration identification-Identifying configurations, configuration items and baselines.
It accomplishes this without assistance of server-based configuration mechanisms, such as the Dynamic Host Configuration Protocol ( DHCP ) or the Domain Name System ( DNS ), and without special static configuration of a network host.
* Configuration Management Database Federation ( CMDBf )-CMDBf facilitates the sharing of information between configuration management databases ( CMDBs ) and other management data repositories ( MDRs ).
* OpenLDAP Version 2. 3, released in June 2005, included the Configuration Backend ( dynamic configuration ), additional overlays including RFC-compliant Password Policy software, and numerous additional enhancements.
* Unified Configuration Interface a set of scripts to unify and simplify the configuration of a Linux distribution.
* ucf ( Update Configuration File ), a Unix utility for preserving user changes to configuration files
* Configuration item, the fundamental structural unit of a configuration management system.
Configuration of a PPPoA requires PPP configuration and ATM configuration.
* Profile Configuration File, a configuration file used to set up VPN connections
0.157 seconds.