* DIN EN # is used for the German edition of European standards.

* DIN 476: international paper sizes ( now ISO 216 or DIN EN ISO 216 )

* Weighting filter according DIN EN 61672-1 2003-10 ( DIN-IEC 651 ) Calculation: frequency f to dBA and dBC

The fatty-acid methyl ester of the kernel oil meets all of the major biodiesel requirements in the USA ( ASTM D 6751-02, ASTM PS 121-99 ), Germany ( DIN V 51606 ) and European Union ( EN 14214 ).

A range of connectors of the same form that differ only in their pin configuration exist and have been standardized originally in DIN 41524 / IEC / DIN EN 60130-9 ( 3-pin at 90 ° and 5-pin at 45 °), DIN 45322 ( 5-pin and 6-pin at 60 °), DIN 45323 ( 6-pin ), DIN 45329 / IEC 10 ( 7-pin at 45 °), DIN 45326 / IEC / DIN EN 60130-9 ( 8-pin at 45 °), and other standards for a range of different applications, including the following examples:

DIN 45326 / IEC / DIN EN 60130-9: 8-pin, 45 °, 270 °

The most common one in European setting is the ISO 9454-1 ( also known as DIN EN 294545-1 ).

For these machines the Typ C norm DIN EN 12331 " Food processing machinery-Mincing machines-Safety and hygiene requirements " from 2004-5 with the change from 2007-A2, is applied.

The European standard for letter boxes, EN 13724: 2002 " Postal services – Apertures of private letter boxes and letter plates – Requirements and test methods ", replaces earlier national standards such as BS 2911: 1974 " Specification for letter plates " or DIN 32617.

( DIN ; in English, the German Institute for Standardization ) is the German national organization for standardization and is that country's ISO member body.

One of the earliest, and probably the most well-known, is DIN 476 — the standard that introduced the A-series paper sizes in 1922 — adopted in 1975 as International Standard ISO 216.

* DIN ISO # is used for the German edition of ISO standards.

* DIN 4512: A definition of film speed, now superseded by ISO 5800: 1987, ISO 6: 1993 and ISO 2240: 2003.

Such standards include DIN, BS, and / or ISO standards.

The primarily used size is mostly referred to by its legacy name of DIN, which refers to ISO 7736.

The international paper size standard, ISO 216, is based on the German DIN 476 standard for paper sizes.

* DIN ISO 6: 1996-02.

* DIN ISO 2240: 1998-06, DIN ISO 2240: 2005-10.

* DIN ISO 5800: 1998-06, DIN ISO 5800: 2003-11.

The phon was proposed in DIN 45631 and ISO 532 B by S. S. Stevens.

* DIN # is used for German standards with primarily domestic significance or designed as a first step toward international status.

E DIN # is a draft standard and DIN V # is a preliminary standard.

de: Perspektive # Isometrische Axonometrie, nach DIN 5

# Literally speaking, the English term light value could be translated as “ Lichtwert ” in German language, however, this is not what the term Lichtwert, as it was introduced by the German shutter manufacturer in 1954 and defined as Belichtungswert in DIN 19010, is used for in German-speaking countries.

# REDIRECT DIN connector

# REDIRECT DIN connector

# REDIRECT DIN connector

# REDIRECT DIN rail

# REDIRECT DIN rail

DIN is a Registered German Association ( e. V.

In 1975 it was renamed again to, or ' DIN ' and is recognized by the German government as the official national-standards body, representing German interests at the international and European levels.

The acronym, ' DIN ,' is often incorrectly expanded as (" German Industry Standard ").

This is largely due to the historic origin of the DIN as " NADI ".

The connector systems that are commonly used with Eurocard architectures include the original DIN 41612 connector that is also standardized as IEC 60603. 2.

The connector known as the 5-row DIN which is used for the VME64 Extensions standard is IEC 61076-4-113.

In addition to the original 31. 25 kbit / s ( baud is the signalling rate and is the reciprocal of the shortest signalling element ; bits / sec is the data rate ) current-loop transported on 5-pin DIN, other connectors have been used for the same electrical data, and transmission of MIDI streams in different forms over USB, IEEE 1394 a. k. a. FireWire, and Ethernet is now common.

There are no specifically metric units for this particular purpose, although there is a DIN standard sometimes used in German publishing, which measures type sizes in multiples of 0. 25 mm, and proponents of the metrication of typography generally recommend the use of the millimetre for typographical measurements, rather than the development of new specifically typographical metric units.

It is physically based on Eurocard sizes, mechanicals and connectors ( DIN 41612 ), but uses its own signalling system, which Eurocard does not define.

For example, the DIN 41612 connectors used in the VMEbus system can withstand 50 to 500 insertions and removals ( called mating cycles ), depending on their quality.

* DIN 1451: typeface used by German railways and on traffic signs

Some early MIDI implementations used XLR3 connectors in place of the 5-pin DIN.

This power supply has the same DIN connector so can also be used with the + 2A / B.

In video broadcast industry, the DIN 1. 0 / 2. 3 and the HD-BNC connector are used for higher density products.

BNC connectors were also used for composite video connections on early home VCRs, often accompanied by either phono connector ( s ) or a 5-pin DIN connector for audio.

Four connector tape recorder cables is mainly used in adaptors between RCA connectors and 5-pin DIN connectors.

* H-breve below is used to transliterate the Arabic character Ḫāʾ () in DIN 31635.

Typically these use the popular relational model of database management, but some use the hierarchical model, especially those used in manufacturing or mandated by governments, e. g., the DIN codes specified by Germany.

* DIN 41612 connector – used for Eurocard buses.

Its earliest known use was in the United States Government Printing Office Style Manual of 1967, and it was later used in character sets such as DIN 31624 ( 1979 ), ISO 5426 ( 1980 ), ISO / IEC 6937 ( 1983 ) and ISO / IEC 8859-2 ( 1985 ).

In addition to a plethora of generic designs ( whose original designer is unknown ) there are at least two different national standards — EIAJ in Japan and DIN in Germany, plus the JSBP connector used on some laptop computers.

A polarised two-pin unshielded connector, designed for connecting a loudspeaker to a power amplifier ( or other device ; many of the earlier shoebox style tape recorders used them ), is known as the DIN 41529 loudspeaker connector.

T-power, also known as A-B powering or 12T, described in DIN 45595, is an alternative to phantom powering that is still widely used in the world of production film sound.

AT systems used a 5-pin DIN connector for the keyboard, and were generally used with serial port mice ( although PS / 2 mouse ports were also found on some systems ).