AES is included in the ISO / IEC 18033-3 standard.

An international standard for this process, ISO 16622 Meteorology — Sonic anemometers / thermometers — Acceptance test methods for mean wind measurements is in general circulation.

The same standard was ratified by the International Organization for Standardization as ISO / IEC 9899: 1990, with only formatting changes, which is sometimes referred to as C90.

This standard has been withdrawn by both INCITS and ISO / IEC.

In March 2000, ANSI adopted the ISO / IEC 9899: 1999 standard.

This standard has been withdrawn by ISO / IEC, but is still approved by INCITS.

The symbol for bit, as a unit of information, is either simply " bit " ( recommended by the ISO / IEC standard 80000-13 ( 2008 )) or lowercase " b " ( recommended by the IEEE 1541 Standard ( 2002 )).

With ISO / IEC 80000-13, this common meaning was codified in a formal standard.

Today the harmonized ISO / IEC 80000-13: 2008 – Quantities and units — Part 13: Information science and technology standard cancels and replaces subclauses 3. 8 and 3. 9 of IEC 60027-2: 2005, namely those related to Information theory and Prefixes for binary multiples.

The Standards council of Canada then sponsored, on January 21, 1993, the registration of an encoded character set for use in ISO / IEC 2022, in the ISO-IR international registry of coded character sets.

A proposal was posted by Michael Everson for the Blissymbolics script to be included in the Universal Character Set ( UCS ) and encoded for use with the ISO / IEC 10646 and Unicode standards.

The proposed encoding does not use the lexical encoding model used in the existing ISO-IR / 169 registered character set, but instead applies the Unicode and ISO character-glyph model to the Bliss-character model already adopted by BCI, since this would significantly reduce the number of needed characters.

* Michael Everson's First proposed encoding into Unicode and ISO / IEC 10646 of Blissymbolics characters, based on the decomposition of the ISO-IR / 169 repertoire.

Right-to-left scripts were introduced through encodings like ISO / IEC 8859-6 and ISO / IEC 8859-8, storing the letters ( usually ) in writing and reading order.

* BS 7799 for information security, the source for ISO / IEC 27001, 27002 ( former 17799 ), and 27005

* BS 15000 for IT Service Management, ( ITIL ), now ISO / IEC 20000

It is also extended through the universal big-endian format clock time: 9 November 2003, 18h 14m 12s, or 2003 / 11 / 9 / 18: 14: 12 or ( ISO 8601 ) 2003-11-09T18: 14: 12.

* ISO / IEC 15408

The algorithm is also specified in ANSI X3. 92, NIST SP 800-67 and ISO / IEC 18033-3 ( as a component of TDEA ).

The Dublin Core became ISO 15836 standard in 2006 and is used as a base-level data element set for the description of learning resources in the ISO / IEC 19788-2 Metadata for learning resources ( MLR ) -- Part 2: Dublin Core elements, prepared by the ISO / IEC JTC1 SC36.

Debit and credit cards are embossed plastic cards complying with ISO / IEC 7810 ID-1 standard.

ID-1 of the ISO / IEC 7810 standard defines cards as nominally.

Credit card s are a common example of ISO / IEC 7810 ID-1 sized cards.

ISO / IEC 7810 Identification cards — Physical characteristics is an international standard that defines the physical characteristics for identification cards.

Part 1 of the standard specifies that the card shall be compliant with ISO / IEC 7810 or ISO / IEC 15457-1, or " an object of any other dimension ".

A number of International Organization for Standardization standards, ISO / IEC 7810, ISO / IEC 7811, ISO / IEC 7812, ISO / IEC 7813, ISO 8583, and ISO / IEC 4909, now define the physical properties of the card, including size, flexibility, location of the magstripe, magnetic characteristics, and data formats.

Though originally charge account identification was paper-based, in 1959 American Express became the first charge card operator to issue embossed plastic cards to ISO / IEC 7810 ID-1 standard.

In 1957, American Express also entered the field, and in 1959 was the first company to issue embossed plastic charge cards to ISO / IEC 7810 standards.

Small cases for securing banknotes which do not have space for credit cards or identification cards may be classified as money clips: this may also be used to describe small cases designed to hold ISO / IEC 7810 cards alone.

Early versions consisted of the whole full-size ( 85 × 54 mm, ISO / IEC 7810 ID-1 ) smart card.

The card was cropped down to 25 × 15 mm ( ISO / IEC 7810 ID-000 ), as illustrated.

* ECMA-164-Private Integrated Services Network ( PISN )-Inter-Exchange Signalling Protocol-Name Identification Supplementary Services ( QSIG-NA ), International and European Versions: ISO / IEC 13868, ETSI ETS 300 238

ISO / IEC 7811 Identification cards — Recording technique is a set of nine ( 7811-1 to 7811-9 ) standards describing the recording technique on identification cards.

A Vehicle Identification Number, commonly abbreviated to VIN, is a unique serial number used by the automotive industry to identify individual motor vehicles, towed vehicles, motorcycles and mopeds as defined in ISO 3833.

Modern-day Vehicle Identification Number systems are based on two related standards, originally issued by the International Organization for Standardization ( ISO ) in 1979 and 1980 ; ISO 3779 and ISO 3780, respectively.

* ISO / IEC 7812 Identification cards — Identification of issuers

* ISO / IEC 7816 Identification cards — Integrated circuit cards

* ISO / IEC 14443 Identification cards — Contactless integrated circuit cards — Proximity cards

ISO / IEC 14443 Identification cards -- Contactless integrated circuit cards -- Proximity cards is an international standard that defines proximity cards used for identification, and the transmission protocols for communicating with it.

* Atmel Corporation, Requirements of ISO / IEC 14443 Type B Proximity Contactless Identification Cards, Application Note, Rev.

ISO / IEC 7812 Identification cards — Identification of issuers was first published by the International Organization for Standardization ( ISO ) in 1989.

* ISO / IEC 24727 -- Identification cards-Integrated circuit card programming interfaces

* ISO / IEC 15693-1: 2000 Identification cards — Contactless integrated circuit ( s ) cards — Vicinity cards — Part 1: Physical characteristics

* ISO / IEC 15693-2: 2006 Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 2: Air interface and initialization

* ISO / IEC 15693-3: 2009 Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol

* ISO 10993-13: 1998 Biological evaluation of medical devices Part 13: Identification and quantification of degradation products from polymeric medical devices

* ISO 10993-14: 2001 Biological evaluation of medical devices Part 14: Identification and quantification of degradation products from ceramics

* ISO 10993-15: 2000 Biological evaluation of medical devices Part 15: Identification and quantification of degradation products from metals and alloys