A Molex connector

The connector design most commonly called a Molex connector has frequently been used to supply DC power, most frequently on personal computers, for supplying power to drives and other peripherals.

Although internal drives are rare, there is a hidden compartment with a SCSI 50-pin connector where a hard drive may be connected, however the power supply module does not typically provide the required Molex connector to power the drive.

The Network Adaptor also provides a Parallel ATA interface and a Molex disk drive power connector to allow installation of a 3. 5 " IDE hard disk drive in the expansion bay.

A common method of reducing the fan speed is by moving the 5v wire in the classical Molex power connector in the place of the Ground wire going to the fan, thereby delivering + 7v (+ 12v-5v ) to the fan.

Also, integration was made easier still by the inclusion of a standard 4-pin Molex power connector in addition to the standard SATA power port.

The 4-pin power connector used in PCs commonly known as a Molex connector.

Molex originated a large variety of connector types, but only one is commonly used in computer hardware, and thus is known unambiguously as a " Molex connector " in that context.

The Verdex Pro motherboards have up to 128 MB RAM, on-board StrataFlash up to 32 MB, an onboard 60-pin Hirose I / O header, an 80-pin Molex connector for connecting additional expansion cards.

Verdex motherboards have up to 128 MB RAM, up to 32 MB of on-board StrataFlash, an on-board 60-pin Hirose I / O header, a 120-pin Molex connector for connecting expansion cards and an optional Bluetooth module.

The Verdex was an upgrade from the Basix and Connex motherboards, adding a second expansion bus via a 120-pin Molex connector, USB host capability ( 12 megabit / second ), and higher capacity RAM and flash memory options.

Fans with Molex connectors can be modified easily.

Locking Molex connectors are available in 3, 4, and 6 terminal configurations.

This form factor was geared specifically towards the needs of high-end systems, and included specifications for a WTX power supply unit ( PSU ) using two WTX-specific 24-pin and 22-pin Molex connectors.

Since its establishment in 1959, more than 110 overseas companies have chosen to Invest in Shannon Ireland included Zimmer, Digital River, GE Capital, Genworth Financial, Bustec, Intel, Lufthansa Technik, Mentor Graphics, Molex, RSA Security and Symantec.

Companies who have invested at Shannon include Avocent, GE Capital, Ingersoll Rand, Intel, Lufthansa Technik, Mentor Graphics, Molex, SYKES, RSA Security and Zimmer.

Molex is a supplier of electronic interconnectors.

Molex sells over 100, 000 products, including everything from electrical and fiber optic interconnect solutions, to switches and application tooling.

Molex supplies a variety of industries, including the telecom, datacom, computer and peripheral, automotive, premise wiring, industrial, consumer, medical and military markets.

Companies supporting the consortium included: Agilent Technologies Inc., Blaze Network Products, Cable Design Technologies, Corning Inc., Enterasys Networks, Force10 Networks Inc., Foundry Networks Inc., Hitachi Cable Ltd, Infineon Technologies Corporation, Ixia, JDS Uniphase, Marvell Technology Group Ltd., Mindspeed, Molex Inc., OFS, Optillion, PMC-Sierra, Primarion, Quake Technologies Inc., Spirent Communications, and Velio Communications Inc.

There are also a three-and four-pin version of this loudspeaker connector used for example by Bang & Olufsen.

A wired PC speaker connector may have a two -, three -, or four-pin configuration, and either two or three wires.

* Berg connector, smaller four pin floppy disk drive ( FDD ) connectors, also used by some hard drives, and carrying the same power supplies as the HDD connectors

ZIF-style connectors for IDE hard drives were used primarily in the design of Ultra-Portable notebooks, and has since been phased out, as SATA has a relatively small-form-factor connector by default.

DBA ( Direct Bus Attachment ) connector for connecting train hard disk interface ESDI / ST-412

Two serial ports were provided primarily to support a printer and modem, and a floppy port connector supported a single external 5. 25-inch drive ( and later “ intelligent ” devices such as 3. 5-inch drives and hard disks ).

The other end is above ground and has a hard sleeve connector.

* Non-Scratch SATA, a type of SATA connector used in some hard drive racks and enclosures

Without bump-stops, a vehicle that " bottoms out " will experience a very hard shock when the suspension contacts the bottom of the frame or body, which is transferred to the occupants and every connector and weld on the vehicle.

However, the IDE connector is internal and requires case modification to connect two hard disks or a single CD-ROM.

" The article noted that " Citroen worked hard at fixing the problems, introducing a new kind of connector after the car was launched, but by then the XM had lost almost all connections with its potential audience.

The device ( like the Amiga A590 hard disk drive that was sold by Commodore for the A500 ) had no through connector, so it was not possible to connect both an A590 and an A570 to the computer at the same time.

Taking advantage of the SCSI implementation, Hill added an external connector to his version of the machine and developed a matching hard drive enclosure.

SCSI hard drives showing 80-pin SCA connector ( top ) and 68-pin connector and separate power and configuration jumpers ( bottom )

The main difference between Neuros1 and Neuros2 players is the backpack on Neuros2 has a USB 2. 0 connector allowing it to be used, independently of the player unit, as a stand-alone USB hard drive.

This means that a standard 36-way centronics male to centronics male cable needs to be used to connect a printer-and these were hard to find since IBM had introduced the DB25F connector.

Some versions can also be used with an external SATA hard drive through the eSATA connector on the back.

They may have single connector to connect one disk array controller or multiple connectors that can be connected to one or more controllers in arbitrary way.

IBM's original floppy disk controller card also included an external 37-pin D-shell connector.

* High-density 26-pin connector with " Y-cable " supports joystick / paddles and two Apple 5. 25 " or UniDisk 3. 5 " floppy disk drives

The Theory of Operation described the details of the operation of the system, including the CRT controller, floppy disk controller, serial communications, memory bank switching, and connector pinouts.

The only exposed parts are a sealed plug connector and a drive fork, which is attached to a slotted disk internally through a bearing and seal.

A floppy disk was attached through a proprietary parallel port connector.

An external floppy disk drive could be added using a proprietary connector ( 19 pin D-sub ).

View of a European Commodore 1551 disk drive, showing the unusual connector

That connector type is the one pictured, which is used for power connections for disk drives and other computer components.

* the 4-pin polarized Berg connectors used to connect floppy disk drive units to the power supply unit, usually referred to as simply a " floppy power connector ",

* Fitment of a 50-pin connector at rear of void for 8 " disk drives

If the 50-pin 8 " disk cable option is present the rear of the void is changed to a clip-on panel securing the 50-pin cable connector.

* 50-pin header on mainboard to optional external 50 pin male IDC connector for external 8 " disk drives