Help


[permalink] [id link]
+
Page "Currach" ¶ 13
from Wikipedia
Edit
Promote Demote Fragment Fix

Some Related Sentences

Cleats and are
These boards are often called Cleats.

Cleats and for
; Baseball Cleats: Baseball specific shoes worn by the player for better traction.

Cleats and may
Cleats may be placed anywhere between the edges of a given panel.
Cleats may have more specific names based on added benefit they provide.

Cleats and .
The area hosts a youth soccer tournament called Clash of the Cleats.

thole and pins
The oars did not use rowlocks or thole pins but square holes cut below the gunwhale line.
The actual fitting that holds the oar may be as simple as one or two pegs ( or thole pins ) or a metal oarlock ( also called rowlock-" rollock ").
Originally rowlocks were two wooden posts or thole pins that the shaft of the oar nestled between.

thole and are
Arrangement of the three levels are believed to have varied, but the most well-documented design made use of a projecting structure, or outrigger, where the oarlock in the form of a thole pin was placed.

thole and for
It was once used to reference a phallus-shaped pin stuck in the edging of a row boat to act as a pivot for the oar ( also known as a " thole pin " or " dole pin.
In open position o became in Early Scots then eventually in Modern Scots, for example: coal, foal, hole and thole endure.

thole and be
An example would be the verb to suffer, which literally means " to endure pain or hardship " ( used alongside the native to thole ), but which since the 14th century could carry the extended meaning of " to allow, to permit ", similar to suffrage today.

thole and .
Also see thole.

pins and are
Modern CPUs are large scale integrated circuits in packages typically less than four centimeters square, with hundreds of connecting pins.
In this method, pins are pushed into the paper at two points which will become the ellipse's foci.
The most common are strap buttons, also called strap pins, which are flanged steel posts anchored to the guitar with screws.
Modern harp strings are often nylon or, less often, metal ; tuning pins are also metal components.
The upper ends of the strings are attached to pins in holes drilled through the neck at specific intervals and at specific distances from the soundboard.
A hammered dulcimer, like an autoharp, harp, or piano, requires a tuning wrench for tuning, since the dulcimer's strings are wound around tuning pins with square heads.
( Ordinarily, 5 mm " zither pins " are used, similar to, but smaller in diameter than piano tuning pins, which come in various sizes ranging upwards from " 1 / 0 " or 7 mm.
Tuning pins are held tightly in holes drilled in the pinblock or wrestplank, an oblong hardwood plank.
Withdrawal symptoms may include, but are not limited to ; severe pain, pins and needles sensation throughout body, sweating, extreme anxiety and restlessness, sneezing, watery eyes, fever, depression, stomach cramps, diarrhea, and extreme drug cravings, among others.
There are three basic types of knitting needles ( also called " knitting pins ").
Starting from the bottom right are two crochet hooks, two stitch holders ( quasi-safety pins ), and two cable needles in pink and green.
This proved fairly successful due to the simplicity of the core, which allowed it to be used in a number of applications that would have formerly used much less capable CISC designs of similar gate count and price — the two are strongly related ; the price of a CPU is generally related to the number of gates and the number of external pins.
GPIO pins are software configurable to either an input or an output state.
When GPIO pins are configured to an input state, they are often used to read sensors or external signals.
These connection points are called " ports " or " pins ", among several other names.
Often these pins are left out of the diagram for clarity, and the power configuration is described or assumed from the circuit.
Some punks wear tight " drainpipe " jeans, plaid / tartan trousers, kilts or skirts, T-shirts, leather jackets ( which are often decorated with painted band logos, pins and buttons, and metal studs or spikes ), and footwear such as Converse sneakers, skate shoes, brothel creepers, or Dr. Martens boots.
Such pins as these are rarely seen by the referee and are subsequently often used by heels and on occasion by cheating faces to win matches.
" The pins are driven by electromechanical impact drivers and are held in position by resilient elastomeric cords.

pins and fitted
Thomas Clarkson wrote ; " ladies wore them in bracelets, and others had them fitted up in an ornamental manner as pins for their hair.
Pine logs, cut and milled at Baraboo, were fitted and set in place in lattice truss construction with 3x10 inch planks secured by hardwood pins, eliminating the use of nails or bolts, and floored by plating.
Some high-range equipment used seven-pin connectors where the outer two carried digital system data: if the connected equipment was incompatible, the outer two pins could be unscrewed from plugs so that they fitted into standard five-pin 180 ° sockets without data connections.
Clevis pins should be closely fitted to the holes in the clevis to reduce wear and reduce the failure rate of either the pin or the clevis.
One style of this audio signal cable is fitted on both ends with connectors that are each populated half with pins and half with sockets.
Another style of connector uses hybrid male / female pins with a receiving slot fitted in the center of each two-tine pin, and relies on 90-degree rotation of the pin axes to mate.
These pins fitted into a small groove cut in the top of each barrel-end and made it easy to see if the gun was loaded.
The Reims windows still used the same ' two lancets plus oculus ' pattern ( as in the Soissons example above ) but now the glass panels were held between narrow stone mullions made up of carefully shaped lengths of masonry ( fitted together with mortar and metal pins ) quite distinct from the wall surrounding them.
The trailer lacked the traditional ramps and racks: automobiles were fitted with pins strapped to the tires, which slotted into holders inside the trailer.
The connector contains 10 standard signal pins and 3 larger positions that can be fitted with either special pins with two concentric contacts for coaxial cable or with special high current pins.

0.309 seconds.