Coordinate dimensioning was the sole best option until the post-World War II era saw the development of geometric dimensioning and tolerancing ( GD & T ), which departs from the limitations of coordinate dimensioning ( e. g., rectangular-only tolerance zones, tolerance stacking ) to allow the most logical tolerancing of both geometry and dimensions ( that is, both form and sizes ).

For the calculation of ephemerides, TDB was officially recommended to replace ET, but deficiencies were found in the definition of TDB ( though not affecting T < sub > eph </ sub >), and these led to the IAU defining and recommending further time scales, Barycentric Coordinate Time ( TCB ) for use in the solar system as a whole, and Geocentric Coordinate Time ( TCG ) for use in the vicinity of the Earth.

Barycentric Coordinate Time ( TCB, from the French Temps-coordonnée barycentrique ) is a coordinate time standard intended to be used as the independent variable of time for all calculations pertaining to orbits of planets, asteroids, comets, and interplanetary spacecraft in the Solar system.

Geocentric Coordinate Time ( TCG-Temps-coordonnée géocentrique ) is a coordinate time standard intended to be used as the independent variable of time for all calculations pertaining to precession, nutation, the Moon, and artificial satellites of the Earth.

Coordinate systems fixed with respect to the rotating axles are defined as having their x-axis unit vectors ( and ) pointing from the origin towards one of the connection points.

TT was formally defined in terms of Geocentric Coordinate Time ( TCG ), defined by the IAU on the same occasion.

The Coordinate system # Coordinate surface | coordinate surfaces of the Cartesian coordinates ( x, y, z ).

* Cartesian Coordinate System

* Coordinate Converter – converts between polar, Cartesian and spherical coordinates

* Cartesian Coordinate System

The coordinates were speedily sent out as an International Astronomical Union ( IAU ) and Gamma-ray burst Coordinate Network Circular.

Coordinate system # Coordinate surface | Coordinate surfaces of the three-dimensional parabolic coordinates.

He is commonly credited with proposing the idea of Coordinate Remote Viewing, a process in which viewers would view a location given nothing but its geographical coordinates, which was developed and tested by Puthoff and Targ with CIA funding.

Coordinate sheets are set up as a list of the member's places on the field, given in coordinates ( such as 5 steps inside the right 45 yard line and 2. 25 steps in front of the Home hash ), each " set " numbered.

* Coordinate and collaborate with other credible sources.

* Coordinate the admission process with academic departments

Practical examples include the International Atomic Time standard and its relationship with the Barycentric Coordinate Time standard used for interplanetary objects.

TDB is now ( since 2006 ) defined as a linear scaling of Barycentric Coordinate Time ( TCB ), and a feature that distinguishes TDB from TCB is that TDB, when observed from the Earth's surface, has a difference from Terrestrial Time ( TT ) that is about as small as can be practically arranged with consistent definition: the differences are mainly periodic, and overall will remain at less than 2 milliseconds for several millennia.

* Coordinate battle space maneuver and integrate with firepower.

Coordinate vectors allow calculations with abstract objects to be transformed into calculations with blocks of numbers ( matrices, column vectors and row vectors ).

* Small Group Counseling – Coordinate small groups of students with similar issues and needs in order promote awareness, strategies and problem solving.

* Coordinate actions with an independentist Chilean army.

* Coordinate BMDS development and operational activity through the asset management process in conjunction with other applicable commands, agencies and organizations.

* Geocentric Coordinate Time ( TCG ) is a coordinate time having its spatial origin at the center of Earth's mass.

* Barycentric Coordinate Time ( TCB ) is a coordinate time having its spatial origin at the solar system barycenter.

TT differs from Geocentric Coordinate Time ( TCG ) by a constant rate.

The present definition of TT is a linear scaling of Geocentric Coordinate Time ( TCG ), which is the proper time of a notional observer who is infinitely far away ( so not affected by gravitational time dilation ) and at rest relative to the Earth.

Geocentric Coordinate Time is a coordinate time scale at Earth's center.

Barycentric Coordinate Time is a coordinate time scale at the center of mass of the solar system, which is called the barycenter.

:: Coordinate conjunction ( C ), determiner ( D ), negation ( Neg ), particle ( Par ), preposition ( P ) and prepositional phrase ( PP ), subordinate conjunction ( Sub ), etc.

Coordinate systems can specify a position in 3-dimensional space, or merely the direction of the object on the celestial sphere, if its distance is not known or not important.

Coordinate data from ACME Mapper.

< Coordinate point =" 0 0 0 1 0 0 0. 5 1 0 "/>

* Display Coordinate System, the coordinate system where objects are transformed to before being displayed in CAD systems.

Barycentric Coordinate Time ( TCB ) is the equivalent of TCG for calculations relating to the solar system beyond Earth orbit.

Coordinate descent does a line search along one coordinate direction at the current point in each iteration.

To do this, dimensioning involves planning for peak-hour traffic, i. e. that hour during the day during which traffic intensity is at its peak.

The dimensioning process involves determining the network ’ s topology, routing plan, traffic matrix, and GoS requirements, and using this information to determine the maximum call handling capacity of the switches, and the maximum number of channels required between the switches ..

Geometric dimensioning and tolerancing ( GD & T ) is a system for defining and communicating engineering tolerances.

Metric dimensioning is routinely used for drill bits of all types, although the details of BS328 apply only to twist drill bits.

The simplest dimensioning system just specifies distances between points ( such as an object's length or width, or hole center locations ).