Help


[permalink] [id link]
+
Page "Transformer" ¶ 113
from Wikipedia
Edit
Promote Demote Fragment Fix

Some Related Sentences

Installations and fire
Art Installations -- Flipside community members bring art to the event for display, including large free-standing works, fire art, and interactive pieces.

Installations and protection
The CSA also produces the Canadian Electrical Code, the 2006 edition of which references IEC 60364 ( Electrical Installations for Buildings ) and states that the code addresses the fundamental principles of electrical protection in Section 131.

Installations and such
Installations are divided into multiple address spaces for a wide variety of reasons, such as:
Installations in commercial and industrial premises must satisfy various safety legislation, such as the Electricity at Work Regulations 1989.

Installations and walls
Installations may be ground-mounted ( and sometimes integrated with farming and grazing ) or built into the roof or walls of a building ( either building-integrated photovoltaicsor simply rooftop ).
Installations may be ground-mounted ( and sometimes integrated with farming and grazing ) or built into the roof or walls of a building ( building-integrated photovoltaics ).

Installations and systems
and Areva Nuohms are marketing Independent Spent Fuel Storage Installations ( ISFSI's ) based upon an unshielded muti purpose caniste which is transported and store in on-site vertical or horizontal shielded storage modules constructed of steel and concrete. These systems are in-place and operational at a number of utility sites.

Installations and .
* – both of Young's books were commissioned by the U. S. Department of Defense, Office of the Deputy Under Secretary of Defense ( Installations and Environment )
* BS 7671 Requirements for Electrical Installations, The IEE Wiring Regulations, produced by the IET.
Les Durs consisted of: Jean-Claude Delorme, Legal Counsel and Secretary of the Corporation ; Dale Rediker, Director of Finances ; Colonel Edward Churchill, Director of Installations ; Philippe de Gaspé Beaubien, Director of Operations, dubbed " The Mayor of Expo "; Pierre de Bellefeuille, Director of Exhibitors ; and Yves Jasmin, Director of Information, Advertising and Public Relations.
A History of Exhibition Installations at the Museum of Modern Art, MIT Press 1998, ISBN 0-262-19402-3.
Ingres may be installed as a Client Installation or as a Server Installation, the difference being that the Client has no databases associated with it, but allows access to databases created in Server Installations.
A typical site would install Ingres Client Installations on its employees PCs, and these would communicate with the Ingres Server installations on the site's core computing facility.
On 15 August 1947, the 1st Fighter Wing was activated as part of AAF Regulation 20-15, " Reorganization of AAF Base Units and Installations ," on 27 June 1947.
The installation, however, remained on the real property records of the 15th Air Base Wing until 15 March 1993 when an Action Memorandum signed by the Deputy Assistant Secretary of the Air Force ( Environment, Safety and Occupational Health ) and the Deputy Assistant Secretary of the Army ( Installations and Housing ) authorized the exchange of Wheeler AFB for Fort Kamehameha Military Reservation.
Installations and airfields were maintained by service forces assigned to the Philippine Department, over which neither officer had any authority.
Installations to the market hall included a clock crafted by William Potts and Sons of Leeds consisting of figures of Guy, Earl of Warwick, the Countess, a retainer and a Saracen.
After the plans were approved in Ottawa by Mitchell Sharp, the federal cabinet minister responsible for the exhibition, and Lester B. Pearson, Safdie was given the blessing of the Expo 67 Director of Installations, Edward Churchill, to leave the planning committee in order to work on the building project as an independent architect.
* 356 BGCA-affiliated Youth Centers on U. S. Military Installations
In 2008 Army Vice Chief of Staff Gen. Richard A. Cody recognized Yongsan Garrison as one of the top three U. S. Army Installations in the World and recognized the garrison by declaring it an Army Community of Excellence.
In May 2000, the Legislative Council of Hong Kong passed the Military Installations Closed Areas ( Amendment ) Order 2000, which renamed the former Prince of Wales Barracks to Central Barracks, and the Prince of Wales Building to the Chinese People's Liberation Army Forces Hong Kong Building.

oil-filled and transformers
The firewall serves as a fire containment wall between one oil-filled transformer and other neighboring transformers, building structures, and site equipment.
A Buchholz relay is a safety device sensing the accumulation of gas in large oil-filled transformers, which will alarm on slow accumulation of gas or shut down the transformer if gas is produced rapidly in the transformer oil.
Though it is not uncommon for oil-filled transformers to have today been in operation for over fifty years, high temperature damages winding insulation, the accepted rule of thumb being that transformer life expectancy is halved for every 8 degree C increase in operating temperature.
Since mineral oil and PCB fluid mix, maintenance equipment used for both PCB and oil-filled transformers could carry over small amounts of PCB, contaminating oil-filled transformers.
Construction of oil-filled transformers requires that the insulation covering the windings be thoroughly dried before the oil is introduced.
Among the projects to be completed before the generators themselves can begin to be overhauled include replacing underground 500 kV oil-filled cables for G19, G20 and G21 generators with overhead transmission lines ( started in ), new 236 MW transformers for G19 and G20 ( started in ), and several other projects.
The powerful high-voltage signal was stepped down to a 36-volt, high-current clock by oil-filled transformers that were distributed about the machine.
Other core materials, such as ferrite cores and oil-filled transformers, would have to be developed to allow the amplifier to produce higher frequencies.
Iron-core coils look like oil-filled high voltage transformers.
* Buchholz relay, a safety device for oil-filled electrical transformers
It is used in oil-filled transformers, some types of high voltage capacitors, fluorescent lamp ballasts, and some types of high voltage switches and circuit breakers.
To improve cooling of large power transformers, the oil-filled tank may have external radiators through which the oil circulates by natural convection.
Since PCB and transformer oil are miscible in all proportions, and since sometimes the same equipment ( drums, pumps, hoses, and so on ) was used for either type of liquid, contamination of oil-filled transformers is possible.
In the field of electric power distribution and transmission, a Buchholz relay is a safety device mounted on some oil-filled power transformers and reactors, equipped with an external overhead oil reservoir called a conservator.

oil-filled and fire
On 12 July 1970 the station's central antenna was struck by lightning, cutting off a stay, setting an oil-filled stay isolator on fire, and crushing the base isolator.

oil-filled and protection
Today, oil-filled equipment has largely been replaced by air-blast, vacuum, or SF < sub > 6 </ sub > equipment, allowing large currents and power levels to be safely controlled by automatic equipment incorporating digital controls, protection, metering and communications.

oil-filled and measures
* Increased safety, which applies to devices using measures such as oil-filled enclosures to prevent sparks

oil-filled and oil
The oil-filled tank often has radiators through which the oil circulates by natural convection.
Large oil-filled power transformer s will have radiators to cool the insulating oil ( left side of this photo ); some units rely on natural circulation of oil through the radiator, others use pumps.

oil-filled and .
Each spring was connected to the outermost edge of the axle by a roller bearing contained in oil-filled axle box.
Cutaway view of oil-filled power transformer.
The shock absorbers were machined, oil-filled and completely tuneable ; they were also produced from the same aluminium alloy.
This interconnection consists of two 138 kilovolt oil-filled submarine transmission cables installed 1975-78 under the Northumberland Strait at the western end of the Abegweit Passage between Murray Corner, New Brunswick and Fernwood, Prince Edward Island.
Electrical cables may be run inside oil-filled tubing to protect them from corrosion in seawater.
The barrel was attached near the breech to a piston rod extending into an oil-filled cylinder placed just underneath the gun.
Disney's technology is not infallible however ; the oil-filled cylinders do occasionally drip or leak.
Jo exits the vehicle in order to help Mario navigate the truck through the oil-filled crater.
Mechanically identical to the Blackfoot, the only other differences in these two models besides the bodies and body mounts were plastic wheels vacuum-plated in a golden finish, the inclusion of rubber-spiked tires for slightly improved off-road traction, a metal bracket to support the servo saver and oil-filled, coilover shock absorbers.
Since the oil-filled units were available separately in kit form, Blackfoot owners could easily upgrade once their budget allowed.
The high-voltage cable of the Kontek is implemented as paper-isolated oil-filled cable with two copper conductors with a cross section of 800 mm < sup > 2 </ sup > permanently joined in parallel.
For practical reasons, the 45 kilometers long submarine cable section through the Baltic Sea between Germany and Denmark was implemented as a single oil-filled section without sockets.
It featured a unique boxed chassis with parallel aluminum panels ( known as Twin Vertical Plates, TVP ) surrounding the transmission and drive axles, two-speed transmission, heavy-duty slipper clutch, eight oil-filled coilover shock absorbers, four-wheel-drive, HPI. 21ci ( 3. 4cc ) pull-start engine with rear exhaust and an HPI 27 MHz three-channel pistol grip radio.

0.185 seconds.