Most parabolic microphones sacrifice low-end fidelity to get a more manageable size.

Most high-end AEGs, such as Classic Army and Tokyo Marui, should not be loaded with anything lighter than 0. 2 g pellets, as the lighter pellets ( 0. 12 g, 0. 15 g ) are typically made for low-end guns, and are not built to the same quality ( such as surface smoothness ).

Most hi-fi amplifiers made between the 1950s and the 1990s and virtually all DJ mixers are so equipped.

Most audio amplifiers require these low-level inputs to adhere to line levels.

Most modern audio amplifiers are based on solid state devices ( transistors such as BJTs, FETs and MOSFETs ), but there are still some who prefer tube-based amplifiers, and the valve sound.

Most audio amplifiers are linear amplifiers operating in class AB.

Most current-clamp amplifiers provide little or no amplification of the voltage changes recorded from the cell.

Most models of telephone amplifiers offer volume control for loudspeaker as well as microphone, mute function and switching between headset and handset.

Most of these kits were intended for audio use, such as hi-fi, utility amplifiers, and test equipment such as a function generator based on the Intersil ICL8038.

Most amplifiers are capable of higher power if driven further into clipping, with corresponding increases in harmonic distortion, so the continuous power output rating cited for an amplifier should be understood to be the maximum power ( at or below a particular acceptable amount of harmonic distortion ) in the frequency band of interest.

Most modern quality amplifiers have > 110 dB dynamic range, which approaches that of the human ear, usually taken as around 130 dB.

Most of the amplifiers produced by ACC were solid-state, but a few models later in production were valve amps.

Most guitar amplifiers can also modify the instrument's tone by emphasizing or de-emphasizing certain frequencies and adding electronic effects.

Most guitarists, particularly in the genres of blues and rock, prefer the sound of vacuum tube amplifiers despite their higher cost, heavier weight, the need to periodically replace tubes and need to re-bias the output tubes ( every year or two with moderate use ).

Most inexpensive guitar amplifiers currently produced are based on semiconductor ( solid-state ) circuits, and some designs incorporate tubes in the preamp stage for their subjectively warmer overdrive sound.

Most amplifiers use negative feedback to trade gain for other desirable properties, such as decreased distortion or improved noise reduction.

Most professional audio amplifiers also provide protection from overdriven signals, short circuits across the output, and excess temperature.

Most modern audio amplifiers are integrated and have several inputs for devices such as CD players, DVD players, and auxiliary sources.

Most commonly they are found embedded in electronic devices such as integrated amplifiers, portable music players and televisions, but standalone units are not uncommon.

Most headphone amplifiers provide power between 10 mW and 2 W depending on the specific headphone being used and the design of the amplifier.

Most commercially manufactured one to two kilowatt linear amplifiers used in amateur radio still use vacuum tubes ( valves ) and can provide 10 to 20 times RF power amplification.

Most modern power amplifiers ( including those used in hi-fi ) employ both techniques, using both class-AB in their output stages, and feedback, offering reasonable efficiency and good distortion figures.

Most accounts of Braille's accident omit reference to left or right.

Most editions published today omit the name.

Most speed and combat models omit the landing gear in the interest of drag and weight reduction, and are hand-launched.

Most modern Bible translations such as the NIV, NASB, ESV, and NRSV are based on the Critical Text and either omit the Comma entirely, or relegate it to the footnotes.

Most renditions omit verses 3, 4 and 5.

Most interpretations of the twentieth century omit the second and antepenultimate couplets, and replace the chorus by the following:

Most trains trains call at all stations, but some services omit.

Most film adaptations of the novel omit Quincey altogether.

Most modern computer systems, however, either omit a reset button or significantly reduce its visibility and / or access to prevent users from accidentally triggering it.

Most lossless compression programs do two things in sequence: the first step generates a statistical model for the input data, and the second step uses this model to map input data to bit sequences in such a way that " probable " ( e. g. frequently encountered ) data will produce shorter output than " improbable " data.

Most implementations produce a stable sort, which means that the implementation preserves the input order of equal elements in the sorted output.

Most particle physicists state that the outcome of the ongoing experiments – the search for new particles at the large particle accelerators and for dark matter – are needed in order to provide theoretical physicists with further input for a ToE.

Most real systems have non-linear input / output characteristics, but many systems, when operated within nominal parameters ( not " over-driven ") have behavior that is close enough to linear that LTI system theory is an acceptable representation of the input / output behavior.

Most first-in first-out ( FIFO ) storage devices are variable-length buffers in that the input rate may be variable while the output rate is constant or the output rate may be variable while the input rate is constant.

Most of them derive from early models formulated by David Marr and James Albus, which were motivated by the observation that each cerebellar Purkinje cell receives two dramatically different types of input: On one hand, thousands of inputs from parallel fibers, each individually very weak ; on the other hand, input from one single climbing fiber, which is, however, so strong that a single climbing fiber action potential will reliably cause a target Purkinje cell to fire a burst of action potentials.

Most vapor-compression heat pumps use electrically powered motors for their work input.

Most of the economic growth in the 20th century was due to reduced inputs of labor, materials, energy, and land per unit of economic output ( less input per widget ).

Most BASIC interpreters of the era converted the input text into a " tokenized " version in which each of the commands was replaced by a single number ( typically one byte long ).

Most web-based tools allow a limited number of input and output formats, such as FASTA format and GenBank format and the output is not easily editable.

Most featured pen-based input.

Most NEOS solvers accept input in the AMPL modeling language.

Most systems include an optional digital audio connector for this task, which is then paired with a similar input on the amplifier.

Most chat room providers are similar and include an input box, a message window, and a participant list.

Most of these involve the character attacking without any input from the player.

Most computer programs contain code which will be executed only under specific conditions depending on factors which can not be determined before-hand, for example user input.

Most reader devices do not return this value when the card is swiped to the presentation layer, and use it only to verify the input internally to the reader.

Most reader devices do not return this value when the card is swiped to the presentation layer, and use it only to verify the input internally to the reader.

Most selection algorithms are also in-place, although some considerably rearrange the input

Most of the C file input / output functions are defined in ( header in C ++).