[permalink] [id link]
Most memory-related CPU instructions can not access all the bits of 48-bit memory, but a special 48-bit register is provided for this purpose.
from
Wikipedia
Some Related Sentences
Most and CPU
Most Amiga models can be upgraded either by direct CPU replacement or through expansion boards.
Most of the difficulty in the design of a superscalar CPU architecture lies in creating an effective dispatcher.
Most modern CPU designs are at least somewhat superscalar, and nearly all general purpose CPUs designed in the last decade are superscalar.
Most commonly, within some scheduling scheme, one process needs to be switched out of the CPU so another process can run.
Most commonly it is used to control video output, but it can write to most of the chipset registers and thus can be used to set audio registers or interrupt the CPU.
Most tasks are blocked or ready most of the time because generally only one task can run at a time per CPU.
Most batch processing systems for mainframe computers may also be considered " multi-user ", to avoid leaving the CPU idle while it waits for I / O operations to complete.
Most notably, the microcomputer replaced the many separate components that made up the minicomputer's CPU with one integrated microprocessor chip.
Most modern microprocessors have at least one of these features in their CPU design to make debugging easier:
Most modern CPU designs include SIMD instructions in order to improve the performance of multimedia use.
Most computers have just one CPU, but some models have several, and multi-core processor chips are becoming the norm.
Most modern CPUs increase their effective operating speeds by multiplying the system clock frequency by a factor ( the CPU multiplier ).
Most UNIX systems count only processes in the running ( on CPU ) or runnable ( waiting for CPU ) states.
Most modern systems use the target system's CPU directly, with special JTAG-based debug access.
Most host systems are ordinary commercial computers unrelated to the CPU used for development-for example, a Linux PC might be used to develop software for a system using a Freescale 68HC11 chip, which itself could not run Linux.
Most software running on x86 architecture define processing power as the model and the clock speed of the CPU.
Most players use Texas Instruments TMS320DA25x ARM plus digital signal processor as their CPU and support some version of Creative's environmental audio extensions ( EAX ).
Most trackers are optimised for speed of replay code, taking less than 3 % of CPU time.
Most CPU designs include a small amount of very high-speed memory known as registers.
Most spam filtering tools are very intensive users of CPU and memory.
Most instructions on most CPU architectures are sequential instructions.
Most often in the console were two chips manufactured by UMC — UA6527P ( CPU ) and UA6538 ( PPU ) -- which have been integrated to be compatible with the 6502 processor and the rest of the logic.
Most notably Unreal and Unreal Tournament feature a software renderer that is able to produce enjoyable quality and performance and made use of CPU instruction set extensions like MMX.
Most and instructions
Most new instructions were added to support the additional registers, as well as up to 32-bit math, hardware division, bit manipulations, and block transfers.
Most of the new instructions are modifications of existing instructions to handle the existence of the additional registers, such as load, store, add, and the like.
Most instructions have a delay slot of 2 cycles and the delay slots are not interlocked, so must be scheduled explicitly, else the resulting hazard means wrong values are sometimes loaded.
By the 1970s, the idea that the game had been created solely by Charles Darrow had become popular folklore: it was printed in the game's instructions and even in the 1974 book The Monopoly Book: Strategy and Tactics of the World's Most Popular Game by Maxine Brady.
Most instructions have dot-letter suffixes, permitting operations to occur on 8-bit bytes (". b "), 16-bit words (". w "), and 32-bit longs (". l ").
Most instructions are dyadic, that is, the operation has a source, and a destination, and the destination is changed.
Most instructions have one or more opcode fields which specifies the basic instruction type ( such as arithmetic, logical, jump, etc.
Most instructions have the symbolic form " OP X, Y, Z ", where OP specifies the sort of instruction, X specifies the register used to store the result of the instruction and the rest specify the operands of the instruction.
Most instructions can take either immediate values or register contents ; thus a single instruction mnemonic may correspond to one of two opcodes.
Most of the functions of the President may only be carried out in accordance with the strict instructions of the Constitution, or the binding ' advice ' of the Government.
; Instruction selection: Most architectures, particularly CISC architectures and those with many addressing modes, offer several different ways of performing a particular operation, using entirely different sequences of instructions.
Most modern processors have special hardware support for subroutine " call " and " return " instructions, so the overhead of one extra machine instruction per dispatch is somewhat diminished.
Most modern CPUs " guess " which branch will be taken even before the calculation is complete, so that they can load up the instructions for the branch, or ( in some architectures ) even start to compute them speculatively.
Most instructions were of type B.
Most instructions had to be followed by a word mark ( a requirement commonly met by the word mark with the opcode of the next instruction ).
Most instructions take just one or two clock cycles, making AVRs relatively fast among the eight-bit microcontrollers.
Most modern compilers would not actually generate two multiply instructions and a store for this statement.
Most, but not all, instructions that use DS by default will accept an ES override prefix.
Most of the text was in black, with red used for the titles of spells, opening and closing sections of spells, the instructions to perform spells correctly in rituals, and also for the names of dangerous creatures such as the demon Apep.
Most instructions can specify which of the " fields " ( bytes ) of a register are to be altered, using a suffix of the form ( first: last ).
* Most instructions are single cycle execution ( 2 clock cycles, or 4 clock cycles in 8-bit models ), with one delay cycle on branches and skips
There were five instruction formats, referred to as Types A, B, C, D and E. Most instructions were of type B.
Most also check that the file has a valid executable file format to safeguard against random bit sequences inadvertently being run as instructions.
0.277 seconds.