The acronym, ' DIN ,' is often incorrectly expanded as (" German Industry Standard ").

One of the earliest, and probably the most well-known, is DIN 476 — the standard that introduced the A-series paper sizes in 1922 — adopted in 1975 as International Standard ISO 216.

Standard wheat flours ( defined in DIN 10355 ) range from type 405 for normal white wheat flour for baking, to strong bread flour types 550, 812, and the darker types 1050 and 1600 for wholegrain breads.

** DIN 1451, German Standard Committee chosen typeface from 1936.

Applicable standards are ASME B18. 21. 1, DIN 127B, and United States Military Standard NASM 35338 ( formerly MS 35338 and AN-935 ).

Standard metric sizes are defined in ISO 2936: 2001 " Assembly tools for screws and nuts — Hexagon socket screw keys ", also known as DIN 911, and, measured in millimeters ( mm ) are:

it: Categoria: Standard DIN

Standard methods for analysis are for example: ASTM D5558 for vegetable and animal fats, ASTM D 94 ( for petroleum ) and DIN 51559.

* German Standard DIN VDE 0620-1: Plugs and socket-outlets for household and similar purposes-Part 1: General requirements.

There are standard methods for determining the acid number, such as ASTM D 974 and DIN 51558 ( for mineral oils, biodiesel ), or specifically for Biodiesel using the European Standard EN 14104 and ASTM D664 are both widely utilised worldwide.

( formerly: German Standard DIN 46277, British Standard BS 5584 )

* DIN 19303 Code for Gestrichener Chromokarton ( German ), a grade of paperboard

* DIN 19303 Code for Gestrichener Zellstoffkarton ( German ), a grade of paperboard also known as SBB, made from ' pigment coated ', ' bleached virgin chemical pulp '

The DIN sync standard, often called " SYNC " or " Sync24 " ( more rarely " Sync48 "), defines an interface for electronic music instruments.

In addition to the original 31. 25 kbit / s ( baud is the signalling rate and is the reciprocal of the shortest signalling element ; bits / sec is the data rate ) current-loop transported on 5-pin DIN, other connectors have been used for the same electrical data, and transmission of MIDI streams in different forms over USB, IEEE 1394 a. k. a. FireWire, and Ethernet is now common.

In addition to a plethora of generic designs ( whose original designer is unknown ) there are at least two different national standards — EIAJ in Japan and DIN in Germany, plus the JSBP connector used on some laptop computers.

* Erroneously also known as " Power DIN ", although different from any standardized Mini-DIN or DIN connector type.

There are DIN standards for a large number of different connectors, therefore the term " DIN connector " alone does not unambiguously identify any particular type of connector unless the document number of the relevant DIN standard is added ( e. g., " DIN 41524 connector ").

A range of connectors of the same form that differ only in their pin configuration exist and have been standardized originally in DIN 41524 / IEC / DIN EN 60130-9 ( 3-pin at 90 ° and 5-pin at 45 °), DIN 45322 ( 5-pin and 6-pin at 60 °), DIN 45323 ( 6-pin ), DIN 45329 / IEC 10 ( 7-pin at 45 °), DIN 45326 / IEC / DIN EN 60130-9 ( 8-pin at 45 °), and other standards for a range of different applications, including the following examples:

The AT keyboard uses the same 5-pin DIN connector as the PC keyboard, but it uses a different, bidirectional interface ( the PC and PC / XT keyboard interface is unidirectional ) and generates different keyboard scan codes.

Swedish outlet ( SMS 1145 ), German outlet ( DIN 11851 ), English RJT ( BS 4825 ), IDF ( ISO 2853 ), tri-clamp ( ISO 2852 ), Danish outlet ( DS 722 ), .... can be found, not to mention different diameters.

Note that despite using the same connectors as MIDI, it uses different pins on these connectors ( 1, 2, and 3 rather than MIDI's 2, 4 and 5 ), so a lead made specifically for MIDI won't necessarily have the pins required for DIN sync physically connected via wires.

It consisted of several Eurocard PCB's with DIN 41612 connectors, and a backplane all based on a 19-inch rack configuration.

It is physically based on Eurocard sizes, mechanicals and connectors ( DIN 41612 ), but uses its own signalling system, which Eurocard does not define.

The international paper size standard, ISO 216, is based on the German DIN 476 standard for paper sizes.

The correct DIN setting is based on height, weight, ski boot sole length, the skiing style of the skier ( cautious, average, or aggressive ) and, age ( if the skier is younger than 10 years old, or 50 years old or older ).

Manza has some of the most luxurious features like a 2 DIN music system which supports USB, AUX and Bluetooth connectivity, driver information system, steering mounted audio controls, ABS, Dual front airbags, Alloy Wheels, colour changing tachometer needle which turns red when the car reaches to the redline, engine immobilizer and central locking based on the variants available.

For example, the DIN 41612 connectors used in the VMEbus system can withstand 50 to 500 insertions and removals ( called mating cycles ), depending on their quality.

* DIN 1451: typeface used by German railways and on traffic signs

Things have improved in recent years, but the somewhat restricted space available in " old " DIN and ASME-standardized stuffing boxes places limits on the type of seal that can be fitted.

The original Tandy 1000 featured a proprietary keyboard port ( using an 8-pin DIN connector ) along with 2 joystick ports ( using 6-pin DIN connectors ) on the front of the case.

BNC connectors were also used for composite video connections on early home VCRs, often accompanied by either phono connector ( s ) or a 5-pin DIN connector for audio.

For a time the 5-pin DIN connector was popular for bi-directional stereo connection between A / V equipment, but it has been entirely displaced on modern consumer devices.

Bindings with longer " float " may hold on during events that require those with shorter motion would require higher DIN settings.

The engine developed a maximum power output of DIN ( against 210 PS on the earlier uncatalysed version ) and maximum torque of 32 kgf · m ( 314 N · m ) ( formerly 31 kgf · m or 300 N · m ).

While all other versions of the DIN plug are generally very reliable, the two-pin DIN plug is considered inferior in some ways-the lack of the outer sheath means far less force is required to disconnect the plug accidentally, makes it more prone to bending or shifting of the pins during use, and also not as solidly seated in its socket-worn two-pin speaker plugs on audio equipment are notorious for being very unreliable, often requiring only the slightest nudge to break contact.

AT systems used a 5-pin DIN connector for the keyboard, and were generally used with serial port mice ( although PS / 2 mouse ports were also found on some systems ).

The. mil. ca suffix is used internally by DND on its intranet, the Defence Information Network ( DIN ) or Defence Wide Area Network ( DWAN ), to distinguish intranet-only websites.

Various weighting curves were derived in the 1960s, in particular as part of the DIN 4550 standard for audio quality measurement, which differed from the A-weighting curve, showing more of a peak around 6 kHz, and these were found to give a more meaningful subjective measure of noise on audio equipment ; especially on the newly invented compact cassette tape recorders with Dolby noise reduction which were characterised by a noise spectrum dominated by high frequencies.

Also used are full-size DIN connectors, modular telephone ( RJ ) connectors, and combinations of mini-and micro-headphone connectors ( typically on handheld radios ).

A DA15 connector on the outside of the board is often broken out into DIN connectors for MIDI.