[permalink] [id link]
The RADIUS server then returns one of three responses to the RAS: 1 ) Access Reject, 2 ) Access Challenge, or 3 ) Access Accept.
from
Wikipedia
Some Related Sentences
RADIUS and server
RADIUS was developed by Livingston Enterprises, Inc., in 1991 as an access server authentication and accounting protocol and later brought into the Internet Engineering Task Force ( IETF ) standards.
RADIUS is a client / server protocol that runs in the application layer, using UDP as transport.
The Remote Access Server, the Virtual Private Network server, the Network switch with port-based authentication, and the Network Access Server ( NAS ), are all gateways that control access to the network, and all have a RADIUS client component that communicates with the RADIUS server.
The RADIUS server is usually a background process running on a UNIX or Microsoft Windows server.
In turn, the RAS sends a RADIUS Access Request message to the RADIUS server, requesting authorization to grant access via the RADIUS protocol.
The RADIUS server checks that the information is correct using authentication schemes such as PAP, CHAP or EAP.
Once the user is authenticated, the RADIUS server will often check that the user is authorized to use the network service requested.
Again, this information may be stored locally on the RADIUS server, or may be looked up in an external source such as LDAP or Active Directory.
When network access is granted to the user by the NAS, an Accounting Start ( a RADIUS Accounting Request packet containing an Acct-Status-Type attribute with the value " start ") is sent by the NAS to the RADIUS server to signal the start of the user's network access.
Periodically, Interim Update records ( a RADIUS Accounting Request packet containing an Acct-Status-Type attribute with the value " interim-update ") may be sent by the NAS to the RADIUS server, to update it on the status of an active session.
Finally, when the user's network access is closed, the NAS issues a final Accounting Stop record ( a RADIUS Accounting Request packet containing an Acct-Status-Type attribute with the value " stop ") to the RADIUS server, providing information on the final usage in terms of time, packets transferred, data transferred, reason for disconnect and other information related to the user's network access.
Roaming using a proxy RADIUS AAA server.
RADIUS facilitates this by the use of realms, which identify where the RADIUS server should forward the AAA requests for processing.
EAP data is first encapsulated in EAPOL frames between the Supplicant and Authenticator, then re-encapsulated between the Authenticator and the Authentication server using RADIUS or Diameter.
RADIUS and then
The authenticator then encapsulates this Identity response in a RADIUS Access-Request packet and forwards it on to the authentication server.
The NAS then uses the RADIUS protocol to connect to an AAA server and passes off the username and password.
RADIUS and returns
The RADIUS server keeps track of all PEs that requested authentication for a particular VPN, and returns a list of them to the PE requesting authentication.
RADIUS and one
* An Internet Service Provider which provides network access via common modem or modem-like devices ( be it PSTN, DSL, cable or GPRS / UMTS ) can have one or more NAS ( network access server ) devices which accept PPP, PPPoE or PPTP connections, checking credentials and recording accounting data via back-end RADIUS servers, and allowing users access through that connection.
This method requires ALL PEs to be configured with one or more RADIUS servers to use.
RADIUS and three
RADIUS serves three functions:
Each of these three RADIUS responses may include a Reply-Message attribute which may give a reason for the rejection, the prompt for the challenge, or a welcome message for the accept.
RADIUS and Access
Based on security level, communication session keys between Access Points are distributed by a RADIUS server.
It is the basis for many commercial RADIUS products and services, such as embedded systems, RADIUS appliances that support Network Access Control, and WiMAX.
RADIUS and 2
FreeRADIUS is a modular, high performance free RADIUS suite developed and distributed under the GNU General Public License, version 2, and is free for download and use.
RADIUS and .
available in many advanced Database Management Systems, simple file permissions provided in the UNIX and Windows operating systems, Group Policy Objects provided in Windows network systems, Kerberos, RADIUS, TACACS, and the simple access lists used in many firewalls and routers.
AAA can use local, RADIUS, and TACACS + databases.
Remote Authentication Dial In User Service ( RADIUS ) is a networking protocol that provides centralized Authentication, Authorization, and Accounting ( AAA ) management for computers to connect and use a network service.
Because of the broad support and the ubiquitous nature of the RADIUS protocol, it is often used by ISPs and enterprises to manage access to the Internet or internal networks, wireless networks, and integrated e-mail services.
Authentication and Authorization characteristics in RADIUS are described in RFC 2865 while Accounting is described by RFC 2866.
Historically, RADIUS servers checked the user's information against a locally stored flat file database.
Modern RADIUS servers can do this, or can refer to external sources — commonly SQL, Kerberos, LDAP, or Active Directory servers — to verify the user's credentials.
server and then
In 1996 Netscape requested that the authors of Berkeley DB improve and extend the library, then at version 1. 86, to suit Netscape's requirements for an LDAP server and for use in the Netscape browser.
If the page's creator and reader are both assuming some platform-specific character encoding, and the server does not send any identifying information, then the reader will nonetheless see the page as the creator intended, but other readers on different platforms or with different native languages will not see the page as intended.
Packet inspection filters do not initially interfere with the connection to the server but inspect the data in the connection as it goes past, at some point the filter may decide that the connection is to be filtered and it will then disconnect it by injecting a TCP-Reset or similar faked packet.
When it receives a request from a client, the DHCP server determines the network to which the DHCP client is connected, and then allocates an IP address or prefix that is appropriate for the client, and sends configuration information appropriate for that client.
The request-and-grant process uses a lease concept with a controllable time period, allowing the DHCP server to reclaim ( and then reallocate ) IP addresses that are not renewed.
The technicians would typically spend ten or so hours to load the files from the DVD to the QuBit, set up the server to play the files, and then set up the projector.
* Use a form to capture user input, and then process and respond to that data without having to send data back to the server.
For example, an attacker compromises a web server on a corporate network, the attacker can then use the compromised web server to attack other systems on the network.
Itanium failed to make significant inroads against IA-32 or RISC, and then suffered from the successful introduction of x86-64 based systems into the high-end server market, systems which were more compatible with the older x86 applications.
On January 28, 1998, Postel, as a test, emailed eight of the twelve operators of Internet's regional root nameservers on his own authority and instructed them to change the root zone server from then SAIC subsidiary Network Solutions ( NSI )' s A. ROOT-SERVERS. NET ( 198. 41. 0. 4 ) to IANA's DNSROOT. IANA. ORG ( 198. 32. 1. 98 ).
The client then sends an operation request to the server, and the server sends responses in return.
The client can then contact the other server.
If the distinguished name in the add request already exists in the directory, then the server will not add a duplicate entry but will set the result code in the add result to decimal 68, " entryAlreadyExists ".
In a client-server system, most communication is essentially synchronous, even if using asynchronous primitives, as the typical operation is a client invoking a server and then waiting for a reply.
This allowed them to develop in user-space and have all the advantages of the original Mach idea, and then move the debugged server into kernel-space in order to get better performance.
That server then shares the message with the servers that are connected to it if both carry the newsgroup, and from those servers to servers that they are connected to, and so on.
Although most POP clients have an option to leave mail on server after download, e-mail clients using POP generally connect, retrieve all messages, store them on the user's PC as new messages, delete them from the server, and then disconnect.
PDAs are used in hospitals, hospices and care homes to record audit and surveillance data, and then sync with a remote data server for immediate access to management data and trend analysis.
When a private key used for certificate creation higher in the PKI server hierarchy is compromised, or accidentally disclosed, then a " man-in-the-middle attack " is possible, making any subordinate certificate wholly insecure.
The server would then respond to the client, and only then would the client display movement to the player.
The IDL files can then be used to generate code to interface between the client and server.
0.495 seconds.