Once harvested, the seeds keep extremely well and are seldom attacked by insects or moulds.

Molds ( also spelled " moulds ") are ubiquitous in the biosphere, and mold spores are a common component of household and workplace dust.

The moulds in which the cheese is pressed are barrel-shaped.

They are home to more than 1, 000 species of vascular plants, about 450 mosses, 200 liverworts, 700 lichens, 900 fungi, and 70 slime moulds.

About ten percent of the mixture are curds, which are pressed into circular moulds for several hours.

These moulds are the essential reason behind its traditional, characteristic shape.

Cycle times for a helmet bag moulding machine vary from 20 to 45 minutes, but the finished shells require no further curing if the moulds are heated.

His works are cast in the formal moulds of Classicism ; he had a profound reverence for Beethoven.

They are also often referred to as water molds ( or water moulds ), although the water-preferring nature which led to that name is not true of most species, which are terrestrial pathogens.

: Specific for the culturing of slime moulds ( which are not fungi ).

Note that a traditional method in Tamil Nadu avoids greasing and uses pure white cloth which is placed on moulds and batter is poured over it after the idlis are cooked the trays along with cloth are inverted upside down in a plate & water is sprinkled on the cloth, then the cloth is pulled & idlis come out without sticking to the cloth.

Adults and larvae live in moist rotten wood that is infested with slime moulds, which are believed to be their diet.

Notable among these are a group of moulds for fine metalworking, showing that brooches and other ornaments were being manufactured on the site in the eighth century.

Springerle moulds are the oldest examples of such.

He describes in detail the way moulds are made for casting so as to avoid defects, including the way patterns are made for the final product shape.

By electroplating the acetate master, stampers ( special moulds ) can be created, which in turn are used to press large quantities of regular vinyl records.

The pressed blocks of cheese are then removed from the cheese moulds and are either bound with muslin-like cloth, or waxed or vacuum packed in plastic bags to be stored for maturation.

Some cheeses are surface-ripened by moulds, e. g. Camembert and Brie, some are ripened internally, e. g. Stilton, which is pierced by the cheesemaker with stainless steel wires, to admit air to promote mould spore germination and growth, in e. g. of Penicillium roqueforti.

Decades later, turned wooden moulds, which were either covered in simple wrappings or much more elaborate coverings called " satinings ", were used.

Each piece of pottery is hand thrown and turned on a wheel ; no industrial techniques or moulds are used in the making process.

Twenty six of the original moulds have now been retired, being either updated or replaced by other subjects.

The salted green cheese curd is put into cheese moulds lined with cheesecloths and pressed overnight to allow the curd particles to bind together.

The contents are then placed into moulds and the whey is pressed out.

The aerated chocolate is then deposited into the centre and the moulds are shaken to distribute the chocolate evenly in the cavity.

were able to inhibit bacterial growth, and even to cure bacterial infections in animal ( Ernest Duchesne in 1897 in his thesis " Contribution to the study of vital competition in micro-organisms: antagonism between moulds and microbes ", or also Clodomiro Picado Twight whose work at Institut Pasteur in 1923 on the inhibiting action of fungi of the " Penicillin sp " genre in the growth of staphylococci drew little interest from the direction of the Institut at the time ).

Gutenberg was a goldsmith familiar with techniques of cutting punches for making coins from moulds.

* Real Yorkshire Wensleydale is usually shaped into a variety of weights moulds ranging in size from a small flat disc known as a " truckle " that is highly pressed, and preserved in wax, to several larger cheeses — it is a mild cheese with an acidic-honeyed flavour

The design studies for precast concrete units or for the moulds for in situ shuttering, prompted by the need to obtain a large number of different forms from the combination of a very limited number of units contributed, in the 1980s, to the Taller ’ s affirmation of the validity of classical forms and geometry in contemporary architecture.

Ecgfrith's pennies, ( also known as sceattas ), were thick, cast in moulds, perhaps copied from Merovingian coins and were issued on a large scale.

Following a supply deal with GM the AC MKVI had a totally new spaceframe chassis, 6. 2 Litre V8 engine and 6-speed manual transmission, and new Corvette brakes, retaining the original shape in lightweight composite material with the moulds taken from an original AC MKIII body.

Flexible moulds can be made from composite materials, silicone or extruded polymer films such as nylon.

Although the knowledge of casting soft metals in moulds was well established before Johannes Gutenberg's time, his discovery of an alloy that was hard, durable, and would take a clear impression from the mould ( because it did not shrink as much as lead alone when cooled ) represents a fundamental aspect of his solution to the problem of printing with movable type.

These early " Hot Wings " issues must not be confused with the current " Hot Wings " line from another vendor although it does include some ZEE moulds.

The Bay's name is from the clay concretions found on its shores which looked either like actual clay buttons or the moulds used in button making.

On 12 January 1548, one hundred handguns were delivered from Berwick, with powder-flasks, matches, touch-boxes, and bullet moulds.

His various designs have been faithfully reproduced in great detail both on plaster and wood, some being taken from his original moulds.

In 1965, he started to work with plastics, first with plastic moulds of human imprints, then from 1966 by pouring expanded polyurethane, which was allowed to expand and solidify.

An employee of Cadburys noted that when the excess from the moulds used to create other chocolate bars was drained off, it fell off in a stream and created folded chocolate with flaking properties.

One designs may be strictly controlled, as in the ubiquitous Laser, with all boats being factory produced from identical moulds, with identical rigs and sails.

The paste is removed from the heat, stirred with a huge whisk and then the curd is extracted and placed in moulds lined with cheesecloths for forming.

Broken moulds from the smithy indicate that axes, knives, swords and pins were produced there and a bronze dagger was found at the site.

He made this discovery 32 years before Alexander Fleming discovered the antibiotic properties of penicillin, a substance derived from those moulds, but his research went unnoticed.

Duchesne's thesis, “ Contribution à l ’ étude de la concurrence vitale chez les micro-organismes: antagonisme entre les moisissures et les microbes ” ( Contribution to the study of vital competition in micro-organisms: antagonism between moulds and microbes ), that he submitted in 1897 to get his doctorate degree, was the first study to consider the therapeutic capabilities of moulds resulting from their anti-microbial activitya.

Clay quarried from the site was mixed with water from nearby Mud Creek, placed in moulds which were dried and then baked in kilns.

The silacone Dunlop prototype was superior to the Goldman prototype, one of Brains first prototypes created from the cuff of a latex Goldman dental mask, however Brain needed a material that would give him design flexibility before the next set of silicone moulds were cast.