[permalink] [id link]
The multipin connectors are based on the MIL C5015 standard and are made by companies like Link in Italy or Amphenol in the United States.
from
Wikipedia
Some Related Sentences
multipin and connectors
The term can be used to refer to the basic cable as may be obtained from a supplier, or a cable with the ends terminated in either a multipin connector, a number of separate connectors on the individual pairs, or a box or panel with a number of chassis-mounted connectors.
During the same period, the professional sound reinforcement industry made the Neutrik Speakon NL4 and NL8 connectors the standard input connectors, replacing 1 / 4 " jacks, XLR connectors, and Cannon multipin connectors which are all limited to a maximum of 15 amps of current.
Some audio multicore cables are fitted with hermaphroditic multipin quick-disconnect connectors for ease of use in the field.
multipin and Amphenol
The American version used a 7-pin Amphenol connector, while European models used a Preh multipin.
connectors and are
Bronze parts are tough and typically used for bearings, clips, electrical connectors and springs.
Only components are connectors, capacitors, resistors and voltage indicator LEDs.
* Fall protection: Carabiners use for fall protection in US industry are classified as " connectors " and are required to meet Occupational Safety and Health Administration standard 1910. 66 App C Personal Fall Arrest System which specifies " drop forged, pressed or formed steel " construction and a minimum breaking strength of.
The most common forms used are 10BASE-T, 100BASE-TX, and 1000BASE-T. All three utilize twisted pair cables and 8P8C modular connectors.
Because the Eurocard system provided for so many modular card sizes and because connector manufacturers have continued to create new connectors which are compatible with this system, it is a popular mechanical standard which is also used for innumerable " one-off " applications.
Compared with RS-232, USB is faster, uses lower voltages, and has connectors that are simpler to connect and use.
As an alternative, USB docking ports are available which can provide connectors for a keyboard, mouse, one or more serial ports, and one or more parallel ports.
The trailer controls are coupled to the tractor through two " glad-hand " connectors, which provide air pressure, and an electrical cable, which provides power to the lights and any specialized features of the trailer.
" Glad-hand " connectors ( also known as " palm couplings ,") are air hose connectors, each of which has a flat engaging face and retaining tabs.
The faces are placed together, and the units are rotated so that the tabs engage each other to hold the connectors together.
These connectors are similar in design to the ones used for a similar purpose between railroad cars.
Commercial themocouples are inexpensive, interchangeable, are supplied with standard connectors, and can measure a wide range of temperatures.
Transceivers can be connected to cable segments with N connectors, or via a vampire tap, which allows new nodes to be added while existing connections are live.
They are also used when extending any sort of cable that normally has plugs on both ends ( rather than a socket on one and plug on the other ), however in this case it is usually called just an " extender ", such as with F connectors, BNC connectors, and various RJ connectors used in telephony and computer networking.
Gender changers are used in professional audio to adapt XLR connectors, RCA connectors, Speakon connectors and TRS connectors.
The connectors are attached to flexible, thickly insulated leads that are terminated with connectors appropriate for the meter.
connectors and based
It consisted of several Eurocard PCB's with DIN 41612 connectors, and a backplane all based on a 19-inch rack configuration.
It is physically based on Eurocard sizes, mechanicals and connectors ( DIN 41612 ), but uses its own signalling system, which Eurocard does not define.
In low-voltage use such as for data communications, electrical shock hazard is not an issue, and male or female connectors are used based on other engineering factors such as convenience of use, cost, or ease of manufacturing.
Teradyne Connection Systems, based in Nashua, New Hampshire manufactures high-density electronic connectors, complete backplanes, and systems packaging.
LEMO is both the name of an electronic and fibre optic connector manufacturer, based in Switzerland, and the name commonly used to refer to push-pull connectors made by that company, which are used in medical, industrial, audio / visual, telecommunications, military, scientific research and measurement applications.
Phase 8 of the Springfield Interchange is currently under construction as part of the I-495 HOT lanes project, based on an infusion of $ 400 million of VDOT cash into the project, which will also include interchange construction near Tysons Corner ( connectors to Jones Branch and Westpark Drives ) and improvements at the Interstate 66 and Dulles Toll Road interchanges.
connectors and on
The focus is on improving road connectors with Turkey and Greece and domestic connections linking Sofia, Plovdiv, and Burgas.
For example, the DIN 41612 connectors used in the VMEbus system can withstand 50 to 500 insertions and removals ( called mating cycles ), depending on their quality.
ISA Passive Backplane showing connectors and parallel signal traces on back side.
The main console unit consists of a 14 × 8 × 2 inch rectangular plastic case that houses the motherboard, with a cartridge slot on the right side and connectors for the external power supply and RF jack at the rear.
At the " back " of each card is one or more connectors, which plug into mating connectors on a backplane which closes the rear of the subrack.
In addition to the original 31. 25 kbit / s ( baud is the signalling rate and is the reciprocal of the shortest signalling element ; bits / sec is the data rate ) current-loop transported on 5-pin DIN, other connectors have been used for the same electrical data, and transmission of MIDI streams in different forms over USB, IEEE 1394 a. k. a. FireWire, and Ethernet is now common.
The newest, " fourth-generation " Myrinet, called Myri-10G, supports a 10 Gbit / s data rate and is interoperable with 10 Gigabit Ethernet on PHY, the physical layer ( cables, connectors, distances, signaling ).
This signal is known as RGBS ( 4 BNC / RCA terminated cables exist as well ), but it's not directly compatible with RGBHV used for computer monitors ( usually carried on 15-pin cables terminated with 15-pin D-sub or 5 BNC connectors ), which carries separate horizontal and vertical sync signals.
Common problems were non-standard pin assignment of circuits on connectors, and incorrect or missing control signals.
Some devices provide test voltages on their interface connectors for this purpose.
In the UK male / female quick release connectors " red line " or emergency, have a female on the truck and male on the trailer and a " yellow line " or service has a male on the truck and female on the trailer.
An example is a cable connector shell with either two female or two male connectors on it ( male-to-male or female-to-female ), used to correct the mismatches that result when interconnecting two devices or cables with the same gender of connector.
connectors and MIL
Some popular MIL spec connectors also have steel springs.
Bendix Scintilla manufactured MIL SPEC electrical connectors of many styles.
connectors and standard
This standard requires that all connectors / carabiners support a minimum breaking strength ( MBS ) of and feature an auto-locking gate mechanism which supports a minimum breaking strength ( MBS ) of.
To ensure a ready supply of inexpensive cabling for its home computer peripherals, Commodore chose standard DIN connectors for the serial interface.
This signal can be distributed by standard audio wiring, connectors, distribution amplifiers, and patchbays, and can be ground-isolated with audio transformers.
The standard defines the electrical characteristics and timing of signals, the meaning of signals, and the physical size and pinout of connectors.
However, the limited transmission speed, relatively large voltage swing, and large standard connectors motivated development of the universal serial bus, which has displaced RS-232 from most of its peripheral interface roles.
In general and according to the standard, terminals and computers have male connectors with DTE pin functions, and modems have female connectors with DCE pin functions.
Many terminals were manufactured with female terminals but were sold with a cable with male connectors at each end ; the terminal with its cable satisfied the recommendations in the standard.
Universal Serial Bus ( USB ) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication and power supply between computers and electronic devices.
Called " PLUS cards ", their connector design allowed them to be smaller ( and cheaper ) than standard ISA cards and to stack, rather than connecting to separate motherboard connectors ; both of these aspects of the design saved space and allowed up to three cards to be installed in a small card compartment of the compact integrated system case.
The A600 features Amiga compatible connectors including two DB9M ports for joysticks, mice, and light pens, a standard 25-pin RS-232 serial port and a 25-pin Centronics parallel port.
While the RS-232 standard originally specified a 25-pin D-type connector, many designers of personal computers chose to implement only a subset of the full standard: they traded off compatibility with the standard against the use of less costly and more compact connectors ( in particular the DE-9 version used by the original IBM PC-AT ).
Many models of Macintosh favored the related RS-422 standard, mostly using German Mini-DIN connectors, except in the earliest models.
The A3000 has a number of Amiga compatible connectors including two DE-9 ports for joysticks, mice, and light pens, a standard 25-pin RS-232 serial port and a 25-pin Centronics parallel port.
The Centronics parallel interface quickly became a de facto industry standard ; manufacturers of the time tended to use various connectors on the system side, so a variety of cables were required.
A number of other companies quickly introduced drives using the same connectors and signals, creating an ST-506-based hard drive standard.
The PCIe standard defines slots and connectors for multiple widths: × 1, × 4, × 8, × 16, × 32.
Matters were further confused by the fact that the 10PASS-TS standard for Ethernet ratified in 2008 used DSL technology, and both cable and DSL modems often have Ethernet connectors on them.
The original standard was a 16-bit bus, designed to fit within the existing Eurocard DIN connectors.
The standard defines two interface levels ; the physical level that deals with electrical signals, connectors, mechanical and thermal conditions and the logical level that describes the address space, data transfer protocols, cache coherence mechanisms, synchronization primitives, control and status registers, and initialization and error recovery facilities.
0.338 seconds.