Atari had been in the process of manufacturing another vector game, Lunar Lander, but demand for Asteroids was so high " that several hundred Asteroids games were shipped in Lunar Lander cabinets.

An assembly line is a manufacturing process ( most of the time called a progressive assembly ) in which parts ( usually interchangeable parts ) are added to a product in a sequential manner to create a finished product much faster than with handcrafting-type methods.

Huntsman's process was used for manufacturing tool steel until the early 1900s.

* Plasma ashing, a process in semiconductor manufacturing

This was done because the 250 nm manufacturing process was too large to allow for on-die cache while maintaining cost-effective die size.

Beads may be divided into several types of overlapping categories, based on different criteria such as component materials, manufacturing process, place or period of origin, surface patterning, or general shape.

Sanofi-Pasteur's BCG vaccine products, made with the Glaxo 1077 strain, were recalled in July 2012 due to noncompliance in the manufacturing process.

Chaim Weizmann first used a pure microbiological culture in an industrial process, that of manufacturing corn starch using Clostridium acetobutylicum, to produce acetone, which the United Kingdom desperately needed to manufacture explosives during World War I.

Philips contributed the general manufacturing process, based on video LaserDisc technology.

The manufacturing process for green cement succeeds in reducing, and even eliminating, the production and release of damaging pollutants and greenhouse gasses, particularly CO2.

The engineering margin that was reserved for manufacturing tolerance has been used for data capacity instead, leaving no tolerance for manufacturing ; for these discs to be truly compliant with the Orange Book standard, the manufacturing process must be perfect.

The exact origin or the manufacturing process of bulat is unknown, but it was likely imported to Russia via Persia, and it was similar and possibly the same as damascus steel.

Strict regulations apply for all steps in the gelatin manufacturing process.

The Industrial Revolution was a period in the late 18th century and early 19th century when major changes in agriculture, manufacturing, and transport affected socioeconomic and cultural conditions in Britain and subsequently spread throughout Europe and North America and eventually the world, a process that continues as industrialisation.

At GM headquarters ’ request, Holden was then reorganised and recapitalised, separating the engine and car manufacturing divisions in the process.

The shape of an individual pellet can be irregular or uniform depending on brand and manufacturing process.

The manufacturing industries that aggregate, pack, package, purify or process the raw materials close to the primary producers are normally considered part of this sector, especially if the raw material is unsuitable for sale or difficult to transport long distances.

It was soon moved to a new refined nMOS manufacturing process called HMOS ( for High performance MOS ) that Intel originally developed for manufacturing of fast static RAM products.

Kikunae Ikeda of the Tokyo Imperial University discovers that a key ingredient in kombu soup stock is monosodium glutamate ( MSG ), and patents a process for manufacturing it.

The Jacquard loom is a mechanical loom, invented by Joseph Marie Jacquard in 1801, that simplifies the process of manufacturing textiles with complex patterns such as brocade, damask and matelasse.

The release of the 266 MHz version of this chip was not until the second quarter of 1998 when AMD was able to move to the 0. 25 micrometre manufacturing process.

This involved process makes jacketed bullets far more expensive on average than cast bullets.

Such bombs are jacketed in a non-fissile ( unenriched ) uranium case, and they derive more than half their power from the fission of this material by fast neutrons from the nuclear fusion process.

An abscess () is a collection of pus ( dead neutrophils ) that has accumulated in a cavity formed by the tissue in which the pus resides due to an infectious process ( usually caused by bacteria or parasites ) or other foreign materials ( e. g., splinters, bullet wounds, or injecting needles ).

Handloading or reloading is the process of loading firearm cartridges or shotgun shells by assembling the individual components ( case / hull, primer, powder, and bullet / shot ), rather than purchasing completely assembled, factory-loaded cartridges.

The handloading process can realize increased accuracy and precision through improved consistency of manufacture, by selecting the optimal bullet weight and design, and tailoring bullet velocity to the purpose.

The limit is the point at which the powder gas temperature and pressure starts to melt the base of the bullet, and leave a thin coating of molten and re-solidified lead in the bore of the gun — a process called leading the bore.

As the bullet enters the barrel, it inserts itself into the rifling, a process that gradually wears down the barrel, and also causes the barrel to heat up more rapidly.

** The pathologic process, injury, or disease that directly results in or initiates a series of events that lead to a person's death ( also called mechanism of death ), such as a bullet wound to the head, exsanguination caused by a stab wound, manual or ligature strangulation, myocardial infarction resulting from coronary artery disease, etc.

The manufacturing process of hollow-point bullets also produces a flat, uniformly-shaped base on the bullet which increases accuracy by providing a more consistent piston surface for the expanding gases of the cartridge.

To the planners, concrete was a silver bullet for the construction process – it was economical, and ' was vaunted as being long-lasting, if not indestructible '.

This process is called mushrooming, as the ideal result is a shape that resembles a mushroom — a cylindrical base, topped with a wide surface where the tip of the bullet has peeled back to expose more area.

* Silver bullet: Assuming that a favorite technical solution can solve a larger process or problem

He was briefly married in one episode (" Days of Wrath ") only to see his new wife murdered, with a bullet intended for him, in a memorable episode in which an enraged Jarrod loses all his calm genteel mannerisms then relentlessly tracks down the killer and is in the process of killing him with his bare hands before both his brothers Nick and Heath arrive just in time and have to physically stop him.

The title is in reference to the narrator's belief that insanity is a sort of " flexible bullet " – it will eventually kill you, but how long this process takes, and how much damage the bullet does before the victim finally dies, are impossible to predict.

This process ( which allows the cartridge to contain more propellant and thus increases potential energy of the bullet ) was used to make the powerful. 357 Magnum cartridge from the much weaker. 38 Special: A. 357 magnum bullet has more than 3 times more energy than a. 38 special bullet of the same weight.

In addition to the process of " crowning " a barrel to ensure a clean and accurate exit of the bullet, there are a number of devices that attempt to harness the muzzle blast for various reasons.

Zakarya Mildanoğlu, an architect who was involved in the restoration process of the church, explains the situation during an interview with Hrant Dink as " The facade of the church is full of bullet holes.

During many conferences related to the restoration of the Akhtamar church, the process of covering the bullet holes are identified as the hardest part of the restoration by academicians and architects.

In internal ballistics, swaging describes the process of the bullet entering the barrel and being squeezed to conform to the rifling.

A mechanical fingerprint is the term used by firearm and toolmark examiners ( commonly and incorrectly called ballistic experts ) to describe the process in which the rifling of a firearm leaves unique striations in a bullet projectile once fired.

Here they fought hand to hand and bayonet to bayonet, with, at first, little advantage to either side ; however, outnumbering the Ottoman forces almost 5 to 1, the Russians eventually drove them back across the Vit, wounding Osman in the process ( he was hit in the leg by a stray bullet, which killed his horse beneath him ).