Besides flathead bronze screws, silicon bronze Stronghold nails ( made by Independent Nail & Packing Co., Bridgewater, Mass. ) are used extensively in assembly and Weldwood resorcinol glue is used in all the joints.

One-inch, No. 10 screws are used in both cases.

Glue and 1-1/2-inch, No. 10 screws are used.

The spray rails are first glued on the outside and fastened from the inside with screws.

Techniques of protecting the climber are similar to those of rock climbing, although the protective devices themselves are different ( ice screws, snow wedges ).

They are also used as fillers for orthopedic plastic screws to aid in reducing the inflammation and increase absorption of these plastic materials.

In 1691, an article in the London Gazette mentioned John Lofting, who held a patent for a fire engine: " The said patentee has also projected a very useful engine for starting of beer, and other liquors which will draw from 20 to 30 barrels an hour, which are completely fixed with brass joints and screws at reasonable rates ".

The metal tuning machines are attached to the sides of the pegbox with metal screws.

The most common are strap buttons, also called strap pins, which are flanged steel posts anchored to the guitar with screws.

Screw pumps are a more complicated type of rotary pumps, featuring two or three screws with opposing thread —- that is, one screw turns clockwise, and the other counterclockwise.

The turning of the screws, and consequently the shafts to which they are mounted, draws the fluid through the pump.

Metal screws are inserted to attach bindings and fins.

They generally are large enough so that screws can pass all the way through the coupling and into the second half to ensure a secure hold. Flanged rigid couplings are designed for heavy loads or industrial equipment.

These holds are connected to the wall by screws which may be fastened anywhere on the wall's surface.

: In the UK and mainland Europe, windows in new-build houses are usually fixed with long screws into expanding plastic plugs in the brickwork.

Archimedes ' screws are used in sewage treatment plants because they cope well with varying rates of flow and with suspended solids.

The principle is also found in pescalators, which are Archimedes screws designed to lift fish safely from ponds and transport them to another location.

On a much larger scale, Archimedes ' screws of decreasing pitch are used for the compaction of waste material.

The connector was locked into position using two clips or hooks on the sides of the connector outside of the D shell ( where screws often are on D subs ) which automatically clicked on when plugged in, and could be removed simply by pulling back on a sliding sheath over the body of the connector, disengaging the hooks.

There are 7940 holes where screws can be inserted.

They are held in place by screws, either UTS ( now largely obsolete ) or metric M3. 5 × 0. 6 threads.

* Screw pumps-the shape of the internals of this pump usually two screws turning against each other pump the liquid.

Each module has a front panel that is wide, including edges or ears that protrude on each side which allow the module to be fastened to the rack frame with screws.

A series of set screws can be tightened so they touch the top of each shaft and hold them in place without passing all the way through the coupling.

Firmly securing the pieces to each other with screws or nails may reduce this problem.

Firmly securing the pieces to each other with screws or nails will remove this problem.

Most such concealed hinges offer the advantage of full in situ adjustability for standoff distance from the cabinet face as well as pitch and roll by means of two screws on each hinge.

The planks may be mechanically connected to each other with copper rivets, bent over iron nails, screws or with adhesives.

Additional German-operated landing craft sent to Italy via rail for the invasion included twelve Siebel ferries ( catamaran rafts powered by automobile engines driving water screws and armed with a mix of 88mm and 20mm flak guns ), six Type 39 Pionierlandungsboote ( carrying 20 tons of cargo, 2 light vehicles or 45 infantrymen and unloaded via clamshell doors at the bow ), six Type 40 Pionierlandungsboote ( a larger version of the Type 39, carrying 40 tons of cargo, three or four light vehicles or 80-90 fully equipped infantrymen ), a company of eighty-one Sturmboote ( Type 39 Stormboats, small plywood boats carrying up to six infantrymen and powered by 30 hp outboard motors ) plus an assortment of large inflatable rafts ( carrying 25 infantrymen each ).

The screws, washers, and case may each be made of homogenous materials, but the other components comprise multiple sub-components of many different types of material.

The five " V " sawbuck was designed with 10 vertical 2x4's each 4 feet long and 4 horizontal 2x6's 5 feet long using 3. 5 inch wood screws.

Many target sights have click adjustments, where a detent in the adjustment screws allows the sight to move the line of sight a certain angular distance with each click.

The business using such a screw may buy screws from any of those manufacturer, because each supplier manufactures the parts to the same specification.

Attached to the backes of each of these acanthus leaves by screws are narrow diamond-studded half arches that meet at the top of the crown to support a sky blue-enamelled sphere decorated with diamonds and with a diamond-studded cross on top.

The means each bogie was affixed to the vertical axle was a cap plate, located just above the track rail ( 1 / 4 " clearance ) and secured with four hex head recessed cap screws.

Conner's 1 / 3-height ( 1 inch thick ) drives used a domed, cast aluminum lid with four screws, one on each corner, sealed to the base plate with a rubber gasket.

On a vehicle braking systems, bleed screws, sometimes known as " bleed nipples ", are at each wheel of the vehicle to allow bleeding of the braking system.

If the fine tuners alone are not enough to tune guitar properly, the SpeedLoader bridge has range tuning screws, one for each string, that control the range of each fine tuner's action.

The frame is mounted vertically on a horizontal base provided with levelling screws.

Macro photography may also be accomplished by mounting a lens in reverse, in front of a normally mounted lens of greater focal length, using a macro coupler which screws into the front filter threads of both lenses.

The grenade launcher screws onto the forward end of the rifle barrel and locks into place by means of a spring-loaded plunger mounted in the front sight base of AK-47 rifles.