In such a case, the adjacent planes are not straight, but instead bend around the edge of the terminating plane so that the crystal structure is perfectly ordered on either side.

The structure of the bowline is identical to that of the sheet bend, except the bowline forms a loop in one rope and the sheet bend joins two ropes.

The fisherman's knot is a bend ( a knot for joining two lines ) with a symmetrical structure consisting of two overhand knots, each tied around the standing part of the other.

The city ultimately chose a proposal by Arcadd known as the " Crystal Palace ", a densely-packed glass multi-tower structure where some of the towers bend outward near the top under 20 stories with a larger retail and public space pavilion at the base.

Some species have teeth that bend with the membrane as it moves over the odontophore, whereas in other species, the teeth are firmly rooted in place, and the entire radular structure moves as one entity.

The center of the cruciform was unsupported, so the central F-1 engine caused the structure to bend upwards.

In such a case, the surrounding planes are not straight, but instead bend around the edge of the terminating plane so that the crystal structure is perfectly ordered on either side.

The sheet bend is related in structure to the bowline.

It is believed that a sufficiently large 2D structure, in the absence of applied lateral tension, will bend and crumple to form a fluctuating 3D structure.

Ca ' Foscari palace is located on the widest bend of the Grand Canal, where during the Historical Regatta a floating wooden structure known as la machina is placed ( on this structure the Venetian authorities sit and look at the race ); this also the spot where the arrival line is set and where the prize-giving takes place.

Martelli and Canning realized that the crystal structures that have identical interstitial regions are actually not the most ideal structure for practical applications and pointed out aperiodic structured fibers, such as Fractal fibers, are a better option for low bend losses.

A becket hitch has the same structure as the sheet bend, which joins, or " bends ", the ends of two ropes together.

Flexural rigidity is defined as the force couple required to bend a non-rigid structure to a unit curvature.

The axoneme serves as the " skeleton " of these organelles, both giving support to the structure and, in some cases, causing it to bend.

In the worst case, the tip structure can bend so far it fails.

This provides maximum strength, an even bend and an even rate of expansion and contraction in water.

In relation to the elbow, a concentric contraction of the biceps would cause the arm to bend at the elbow as the hand moved from near to the leg to close to the shoulder ( a biceps curl ).

The fibers pass downward, and end in a tendon, which occupies the anterior border of the muscle, passes through a distinct compartment in the cruciate crural ligament, crosses from the lateral to the medial side of the anterior tibial vessels near the bend of the ankle, and is inserted into the base of the distal phalanx of the great toe.

When Moro was abducted, the government, at the time led by Giulio Andreotti, immediately took a hardline position stating that the " State must not bend " on terrorist demands.

When Moro was abducted, the government immediately took a hard line position: the " State must not bend " on terrorist demands.

From the Oxus ( 1, 000 feet ) to Faizabad ( 4, 000 feet ) and Zebak ( 8, 500 feet ) the course of the Kokcha offers a high road across Badakhshan ; between Zebak and Ishkashim, at the Oxus bend, there is but an insignificant pass of 9, 500 feet ; and from Ishkashim by the Panj River, through the Pamirs, is the continuation of what must once have been a much-traversed trade route connecting Afghan Turkestan with Kashgar of China.

* Upon receiving the head referee ’ s signal, the lifter must bend the knees and lower the body until the top surface of the legs at the hip joint is lower than the top of knees.

Although the drive sprocket must still pull the track around the wheels, the track itself tends to bend inward, slightly assisting the sprocket and conforming to the wheels somewhat.

If he would not bend, the decisions of the court must be executed by force within a year.

As one must e. g. slow down before a dangerous bend in the track, the game requires some foresight and planning for successful play.

For many people the second toe is actually longer than the big toe, and if shoes sized to fit the big toe is the second ( and perhaps even the third toe ) must bend to fit into the shoe.

At each of these bows, one must bend over until the vertebrae protrude from one's back ; one physically unable to do so suffices by nodding the head.

Jess and Jules tie the score, and when Jess is awarded a free kick, she must bend the ball around the wall of players to win the game.

Gently bending a slice must then roughly maintain this curvature ( assuming the bend is roughly a local isometry ).

If one bends a slice horizontally along a radius, non-zero principal curvatures are created along the bend, dictating that the other principal curvature at these points must be zero.

Because on the inside of the bend the turns of a close-wound helix can't get any closer together, the bending causes the turns to separate on the outside of the bend, and so at the centerline of the housing, there must also be an increase of length with increasing bend.

They are hard to open and close because the zipper anvil must bend apart teeth that are being held under tension.

When seizing the Carrick bend, both ends must be secured to their standing parts or the bend will slip.

In VLSI integrated circuit design, if a collection of modules must be connected by wires that can each bend at most once, then again there are two possible routes for the wires, and the problem of choosing which of these two routes to use, in such a way that all wires can be routed in a single layer of the circuit, can be solved as a 2SAT instance.

This is a result of the Green and Yellow Lines ' location below 7th Street NW, while the Red Line must bend towards the southeast in order to reach Judiciary Square and Union Station.

After the plans were drawn up, his patroness decided water at night was bad for her health Since the house was in a bend of the River Thame, rather than abandon the site, she decided Devey must design a house without bedrooms, and she would decamp every evening to her brother's home, Waddesdon Manor.

At the crucial moment of Clovis ' baptism, Remigius declared, " Now you must bend down your head, you proud Sicamber.

The other actor, playing the rear end of the animal, must bend at the waist so that his torso is horizontal like that of a horse, and put his arms around the waist of the first actor.

The arm through which fluid is pushed back to the axis of rotation must exert a force on the fluid to decrease the fluid's angular momentum again, hence that arm will bend forward.

The bandy stick should be crooked and the bend of the blade is split up into 5 different dimensions, where 1 has the smallest bend and 5 has the most.

Intuitively, the process can be pictured as follows: first shrink the real line to the open interval (- π, π ) on the x-axis ; then bend the ends of this interval upwards ( in positive y-direction ) and move them towards each other, until you get a circle with one point ( the topmost one ) missing.

In the transition between two positions the diver may for example bend their legs or curve at the waist, and points will not be deducted for doing so.

Then the quotient space X /~ can be naturally identified with a torus: take a square piece of paper, bend and glue together the upper and lower edge to form a cylinder, then bend the resulting cylinder so as to glue together its two open ends, resulting in a torus.

For a thrown snap, especially in formations wherein the ball may be snapped to players in different positions, the snapper will commonly bend over looking between his legs.

Nile crocodiles can also be a threat to giraffes when they bend down to drink.

However, if there is a planet between the departure point and the target, it can be used to bend the path toward the target, and in many cases the overall travel time is greatly reduced.

One can identify three types of distortions that could occur in an oriented sample: ( 1 ) twists of the material, where neighboring molecules are forced to be angled with respect to one another, rather than aligned ; ( 2 ) splay of the material, where bending occurs perpendicular to the director ; and ( 3 ) bend of the material, where the distortion is parallel to the director and molecular axis.

The moisture in wet planks allowed the builder to force the planks into a more acute bend if need be.

GM-compatible devices are required to respond to velocity, aftertouch, and pitch bend, to be set to specified default values at startup, and to support certain controller numbers and Registered Parameter Numbers.

Card quality can be preserved for longer if players agree not to bend cards, and proper shuffling techniques are used.

Tips may be straight or have a bend.

It was determined that the north-south boundary for three of these states was to be " an east and west line drawn through the southerly bend or extreme of Lake Michigan.

An original bend in the river can be traced by observing the angles of two of the arches of the railway viaduct alongside UMIST.

By 1972, the clean and press was discontinued because athletes started to push with legs and bend backwards instead of strictly pressing the weight overhead, and this left the sole elements of what is today's modern Olympic weightlifting programme – the snatch and the clean and jerk. The snatch entails pulling with a wide grip the barbell overhead without pressing out with the arms. It is a very precise lift that can be nullified by a lack of balance of the athlete. The clean and jerk is more forgiving using a narrower grip pull the bar to the shoulders and then using the strength of the legs push until arms reach full extension without a press out.

Neither of these knots should be used as a bend for attaching two ropes together.

The loop portion is isolated when the other two legs are loaded, and in fact the butterfly can be tied as a bend with the ends emerging where the loop would be.

In 1855 part of the fort was demolished so that the south bank of the Chicago River could be dredged, straightening the bend in the river and widening it at this point by about ; and in 1857, a fire destroyed nearly all the remaining buildings in the fort.

When a moderate number of sheets are inserted between the two " tongues " of the clip, the tongues will be forced apart and cause torsion in the bend of the wire to grip the sheets together.

The inner sets of wheels are mounted at hubs between two segments and use angle sensors to detect when the bend at the joint exceeds a certain threshold, and thus, the wheels should be rotated to keep the segments aligned.

Were the Earth flat, light rays that bend down would soon hit the ground and only nearby objects would be affected.

The International Guild of Knot Tyers warns that this knot should never be used to bend two ropes together.