Typically for a theropod, Albertosaurus was bipedal and balanced the heavy head and torso with a long tail.

Typically thin sections are stained for several minutes with an aqueous or alcoholic solution of uranyl acetate followed by aqueous lead citrate.

Typically, the lead starts this move by stepping side with his left foot and then crosses in front with his right foot.

Typically, an umbrella rig consists of four plastic neon green lures with a lead dragging behind.

Typically the glass in these windows is separated by lead glazing bars.

Typically, to " make the cut ", players must be either within 44 places of the lead ( ties counting ), or within 10 strokes of the leader's score.

Typically, most of the act's recordings featured Knight's contralto on lead vocals and the three male members of the group, usually referred to as " The Pips " by themselves, providing characteristic background vocals.

Typically, any musical from this team will have the casting of a strong baritone lead, a dainty and light soprano lead, a supporting lead tenor, and a supporting alto lead.

Typically, there is a large nest chamber lined with small sticks and other plant material about a metre below the surface, from which several vertical shafts lead upwards.

Typically an eclamptic seizure will not lead to lasting brain damage ; however, intracranial haemorrhage may occur.

* " Single version " or " soundtrack version " ( Typically used to reference singles taken from soundtracks, or lead singles from an album )

Typically the weight is lead or iron, and weighs around 20 kg ( 44 lb ).

Typically, fact-checking is an entry-level publishing job at major magazines ; fact-checker jobs at The New Yorker are considered prestigious and can lead to higher-level positions, usually at other magazines.

* Supplemental EIS ( SEIS ): Typically prepared after either a Final EIS or Record of Decision has been issued and new environmental impacts that were not considered in the original EIS are discovered, requiring the lead agency to re-evaluate its initial decision and consider new alternatives to avoid or mitigate the new impacts.

Typically, where it is not possible to accurately predict a behavior, a pessimistic result is used, which can lead to the WCET estimate being much larger than anything achieved at run-time.

Typically taking on the protagonist male lead roles in his movies, he also introduces elements of intimate themes and political connotations.

Typically, an electric motor is mechanically connected to rotate a lead screw.

Typically the lurker will lead the team in interceptions and spy the quarterback on the deep ball.

Typically an antenna consists of an arrangement of metallic conductors (" elements "), electrically connected ( often through a transmission line ) to the receiver or transmitter.

Typically near-field effects are not important farther away than a few wavelengths of the antenna.

Typically one finds simple relations describing the antenna far field patterns, often involving trigonometric functions or at worst Fourier or Hankel transform relationships between the antenna current distributions and the observed far field patterns.

Typically a dipole antenna is formed by two quarter wavelength conductors or elements placed back to back for a total length of.

Typically the ATU is connected between the antenna and the radio transmitter or receiver.

Typically, it is expressed in voltage per length or signal power received by a reference antenna.

Typically, they used a base station that was connected to a telephone line and a handset with a microphone, speaker, keypad, and telescoping antenna.

Typically the base or repeater station has a high antenna, which allows greater range, compared with a ground vehicle or hand-held transceiver.

Typically the two antenna electrodes are patterned on a low temperature gallium arsenide ( LT-GaAs ), semi-insulating gallium arsenide ( SI-GaAs ), or other semiconductor ( such as InP ) substrate.

Typically, when an algorithm is associated with processing information, data is read from an input source, written to an output device, and / or stored for further processing.

Typically, the input object is transformed into a feature vector, which contains a number of features that are descriptive of the object.

Typically, each preprocessor translates only sections of the input file that are specially marked, passing the rest of the file through unchanged.

Typically, input documents are XML files, but anything from which the processor can build an XQuery and XPath Data Model can be used, for example relational database tables, or geographical information systems.

Typically the digital output will be a two's complement binary number that is proportional to the input, but there are other possibilities.

Typically, one analyzes filters by calculating how the filter will respond to a simple input such as an impulse response.

Typically sensory input is considered " down ", and higher cognitive processes, which have more information from other sources, are considered " up ".

Typically, ALSA supports up to eight cards, numbered 0 through 7 ; each card is a physical or logical kernel device capable of input, output, or control of sound, and card number 0 is used by default when no particular card is specified.

Typically, a guitar amp's preamplifier section ( known as a ' pre ') provides sufficient gain so that an instrument can be connected directly to its input, and its main amplification section ( known as the ' power stage ') sufficient power to connect loudspeakers directly to its output, both without requiring extra amplification.

Typically the current state is stored in flip-flops, and a global clock signal is connected to the " clock " input of the flip-flops.

Typically this would trigger a register dump and then the monitor would await programmer input.

** input prefixing is a process waiting for a message that was sent on a communication channel named before proceeding as binding the name received to the name Typically, this models either a process expecting a communication from the network or a label usable only once by a operation.

Typically a current buffer amplifier is used to transfer a current from a first circuit, having a low output impedance level, to a second circuit with a high input impedance level.

Typically an input-output technique would be more accurate, but the input data is not always available.

Typically, a rear-wheel-drive transmission has three shafts: an input shaft, a countershaft and an output shaft.

In this differential the maximum torque difference between the two outputs, Trq < sub > d </ sub >, is a fixed value at all times regardless of torque input to the differential or speed difference between the two outputs. Typically this differential used spring loaded clutch assemblies.

Typically α is left as a user input ( for example it may be estimated from historical data ).

Typically CIM relies on closed-loop control processes, based on real-time input from sensors.

Typically external input of nutrients is very low and efficient recycling of nutrients maintains productivity.

Typically, the intensity that is diffracted into m = 0 order can be varied between 15 % to 99 % of the input light intensity.

Typically the editor on a work-for-hire project ( i. e. one where the writer / artist does not own the character whose story they are telling ) will have more direct influence over and input to the story than would the editor of a creator-owned title.

Typically, reactive distillation equipment comprises a reactive column, with the feed input, with directly attached stripping and enriching columns with the outputs.

Typically, the data is stored in a buffer as it is retrieved from an input device ( such as a mouse ) or just before it is sent to an output device ( such as speakers ).