Typically, a lens is used to focus the light reflected or emitted from objects into a real image on the light-sensitive surface inside a camera during a timed exposure.

Typically light rail systems attract between 30 and 40 % of their patronage from former car trips.

Typically, the theory and applications of emission, absorption, scattering of electromagnetic radiation ( light ) from excited atoms and molecules, analysis of spectroscopy, generation of lasers and masers, and the optical properties of matter in general, fall into these catergories.

Typically, light verse in English is formal verse, although a few free verse poets, such as Billy Collins, have excelled at light verse outside the formal verse tradition.

Typically, a 67 watt, 69 watt, or 115 watt medium-base ( household lamp in the US ) light bulb provides the illumination.

Typically a light meter will include a computer, either digital or analog, which allows the photographer to determine which shutter speed and f-number should be selected for an optimum exposure, given a certain lighting situation and film speed.

Typically, two photon maps are created for a scene: one especially for caustics and a global one for other light.

Typically, this might be a light blue wash for the sky.

Typically, this results in the moon's night side being bathed in a soft, faint light.

Typically, any musical from this team will have the casting of a strong baritone lead, a dainty and light soprano lead, a supporting lead tenor, and a supporting alto lead.

Typically, American and NATO inert munitions are painted entirely in light blue and / or have the word " INERT " stenciled on them in prominent locations.

Typically, the shield cartilage graft is stacked in two layers, in order to transmit the desired light reflex characteristic of the nasal tip.

Typically a dark sky site away from light pollution is chosen as a location.

Typically they are built with light steel frames and drop handlebars.

Typically light fighters have been dismissed by military planners as being too limited in capability, but several light fighter designs have fairly good combat records.

Typically, the higher the value, the more sensitive the tube is to light.

Typically light weight school minibuses feature less robust interiors, fewer seats and can include light weight components-aluminium seats for example.

Typically, enlargers are used in a darkroom, an enclosed space from which extraneous light may be excluded ; some commercial enlargers have an integral dark box so that they can be used in a light-filled room.

Typically, contemporary military pilots learn initial flying skills in a light aircraft not too dissimilar from civilian training aircraft.

Typically, the optical system consists in a light-tight reading chamber, and PMT detector measuring the light emitted by the samples during the reaction.

Typically, a Gurung person have dark-brown almond eyes, double eye-lids, dark hair, high cheekbones, full lips, small jawline, light skin, and a fairly elevated nose-bridge.

Typically, when an algorithm is associated with processing information, data is read from an input source, written to an output device, and / or stored for further processing.

Typically one of the two mirrors, the output coupler, is partially transparent.

Typically the digital output will be a two's complement binary number that is proportional to the input, but there are other possibilities.

Typically only one of the new frequencies is desired, and the other signal is filtered out of the output of the mixer.

Typically, a 16 bit analog-to-digital converter may have a dynamic range of between 90 to 95 dB ( Metzler 2005: 132 ), whereas the signal-to-noise ratio ( roughly the equivalent of dynamic range, noting the absence of quantization noise but presence of tape hiss ) of a professional reel-to-reel 1 / 4 inch tape recorder would be between 60 and 70 dB at the recorder's rated output ( Metzler 2005: 111 ).

Typically, ALSA supports up to eight cards, numbered 0 through 7 ; each card is a physical or logical kernel device capable of input, output, or control of sound, and card number 0 is used by default when no particular card is specified.

Typically only one of the new frequencies is desired, and the other signal is filtered out of the output of the mixer.

Typically, an amplifier's power specifications are calculated by measuring its RMS output voltage, with a continuous sine wave signal, at the onset of clipping — defined arbitrarily as a stated percentage of total harmonic distortion ( THD )— into specified load resistances.

Typically, a guitar amp's preamplifier section ( known as a ' pre ') provides sufficient gain so that an instrument can be connected directly to its input, and its main amplification section ( known as the ' power stage ') sufficient power to connect loudspeakers directly to its output, both without requiring extra amplification.

** output prefixing describes that the name is emitted on channel before proceeding as Typically, this models either sending a message on the network or a operation.

Typically a current buffer amplifier is used to transfer a current from a first circuit, having a low output impedance level, to a second circuit with a high input impedance level.

Typically helix TWTs achieve less than 2. 5 kW output power.

Typically, such an oscillator has an average output power of 0. 5 to 1. 5 watt.

Typically, power output in excess of 300 hp was available from 3000 rpm to the 7500 rpm maximum, with a peak of 330 – 340 hp at around 5500 rpm.

Typically, a rear-wheel-drive transmission has three shafts: an input shaft, a countershaft and an output shaft.

Typically, the paper is sent to an output tray where any remaining dispersant evaporates, leaving the copies with a faint " kerosene " odor.

Typically the motor coils are driven from a commutator on one end of the shaft, when the generator coils output to another commutator on the other end of the shaft.

Typically, there could be increasing returns at relatively low output levels, decreasing returns at relatively high output levels, and constant returns at one output level between those ranges.

Typically, if output growth slows down, socio-economic inequality ( measured e. g. by the Gini coefficient ) increases.

Typically one of these output devices has to be declared the " primary " device, and only the primary device can display hardware overlays.

Typically this concept confines itself to one publishing company's output ( although concepts such as the Wold Newton family extend the boundaries considerably ), and it is most common in the main superhero universes of DC and Marvel.

Typically, the data is stored in a buffer as it is retrieved from an input device ( such as a mouse ) or just before it is sent to an output device ( such as speakers ).