Typically a vision mixer would be found in a video production environment such as a television studio, production truck, OB Van or linear video editing bay of a post-production facility.

Typically players are free to play any card into a trick in the first phase of the game, but must follow suit as soon as the score is depleted.

Typically, materials demonstrate ferroelectricity only below a certain phase transition temperature, called the Curie temperature, T < sub > c </ sub >, and are paraelectric above this temperature.

Typically, when an aqueous solution is used to transport the sample through the column, the technique is known as gel-filtration chromatography, versus the name Gel permeation chromatography, which is used when an organic solvent is used as a mobile phase.

Typically, given a phase, the center tap of each winding is made common: giving three leads per phase and six leads for a typical two phase motor.

Typically, wire-guided torpedoes run at high speed to close the range ( the approach speed ) and slow down to minimise self-generated noise interference with on-board sensors during the attack phase ( the attack speed ).

Typically the missing piece is the societal recognition and reincorporation phase.

Typically its motion is 90 degrees out of phase with the piston.

Typically, at the earliest phase in a superficial lesion, one will see a bluish red area with obvious blood vessels and surrounding pallor.

Typically, mobile offices in North America feature a single phase split ( 240 volt center-tapped ) electric service that is connected to a nearby source of power, to run small window-unit air conditioners, and the like.

Typically the repolarization phase of an action potential results in hyperpolarization, attainment of a membrane potential that is more negative than the resting potential.

Typically, a two or three phase supply of a few amperes passes through small ' excitation ' anodes.

Typically a subsea tree would have a choke ( permits control of flow ), a floline connection interface ( hub, flange or other connection ), subsea control interface ( direct hydraulic, electro hydraulic, or electric ) and sensors for gathering data such as pressure, temperature, sand flow, erosion, multiPhase flow, single phase flow such as water or gas.

Typically this phase can last as little as one day or as long as 3 weeks, depending on the species.

Typically, the Leaf Area Index ( LAI ) is above two to three in this phase.

Typically a dam is constructed on a river, creating an artificial lake behind it.

Typically, the artist takes the location into account while planning and creating the artwork.

Typically the right hand, left hand and pedals will each take a different part thus creating the same texture as in a trio.

Typically, descending air also gets warmer because of adiabatic compression ( see Foehn winds ) down the leeward side of the mountain, creating an arid region.

Typically starting from scratch and creating their own custom circuit boards, these engineers are essentially building giant remote-controlled toys.

Typically the bark was removed around the base of the tree above the buttresses, and then some amount of cutting and splitting with stone adzes and mauls would be done, creating a wide triangular cut.

Typically, the most notorious flops are attempts at creating summer blockbusters, which often incur enormous production costs in a highly competitive market.

Typically, a sales representative will assist the customer in creating their ad design and provides a Proof Copy for review and approval.

Typically for the British Army, protocol can vary widely between units, creating a minefield for outsiders, new recruits, and soldiers serving outside their parent regiments.

Typically, the design goal involves protecting an at-risk ecosystem, restoring a degraded ecosystem, or creating a new sustainable ecosystem to satisfy needs of nature and society.

Typically, the biggest difference between film and stage musicals is the use of lavish background scenery and locations that would be impractical in a theater.

Typically, the military will not assist filmmakers if the film is critical of them.

Typically 35mm film SLRs could sync flash at only up to 1 / 60th second if the camera has horizontal run cloth curtains, and 1 / 125th if using a vertical run metal shutter.

Typically the developing of such a roll of film is an exercise in automatic technique in and of itself, cutting the film by counting sprocket holes alone, with no regard for the images present on the negative.

Typically, an animator does not draw inbetweens for all 24 frames required for one second of film.

Typically, the term can refer to the process itself, the equipment used for the procedure ( a 16 mm or 35 mm movie camera mounted in front of a video monitor, and synchronized to the monitor's scanning rate ), or a film made using the process.

Typically a light meter will include a computer, either digital or analog, which allows the photographer to determine which shutter speed and f-number should be selected for an optimum exposure, given a certain lighting situation and film speed.

Typically the image circle produced by a lens is large enough to cover the film or sensor completely, possibly including some vignetting toward the edge.

Typically this style is achieved when each film frame is captured at a rate much faster than it will be played back.

Typically, modern commercially produced varnishes employ some form of alkyd for producing a protective film.

Typically the magnetic tape was wound around a copper wire, with a stack of such wires being embedded in a PET film sheet.

Typically there are around 200 film showings and 60-100 nights of live theatre.

Typically made by Alfa Romeo, Bugatti, Delage, Delahaye, Duesenberg, Mercedes-Benz, Lincoln, Cadillac, and others, these extremely stylish prestige cars were favored by film stars, aristocrats, playboys, and gangsters for projecting dashing and extravagant images.

Typically, for 25 frame / s formats ( European among other countries with 50 Hz mains supply ), the content is PAL speedup, while a technique known as " 3: 2 pulldown " is used for 30 frame / s formats ( North America among other countries with 60 Hz mains supply ) to match the film frame rate to the video frame rate without speeding up the play back.

Typically, a TD is a mix of an artist and a programmer, responsible for the more technical aspects of film production, such as programming shaders, developing character rigs and animation setups, performing complex simulation tasks and setting up the pipeline how the data is passed from one stage in the film production to the next.

Typically session musicians are used by recording studios to provide backing tracks for other musicians in recording studios and live performances ; recording for advertising, film and television ; or theatrical productions.

Typically, there are many plot twists, and film focuses on the characters ' attempts to formulate a plan, carry it out, and escape with the goods.

Typically, the QCM only works well for film thicknesses much less than a quarter of the wavelength of sound ( corresponding to a few micrometres, depending on the softness of the film and the overtone order ).

Typically, a TDoR memorial includes a reading of the names of those who lost their lives during the previous year and may include other actions, such as candlelight vigils, art shows, food drives, film screenings, marches, among others The TDoR is the culmination of Transgender Awareness Week ..

Typically issued in sets of eight, each featuring a different scene from the film.