When a positive voltage is applied to anode of the diode from the circuit, more holes are able to be transferred to the depleted region, and this causes the diode to become conductive, allowing current to flow through the circuit.

When the system is idle, the CPU clocks itself down via lower bus multiplier and selects a lower voltage.

When a program demands more computational resources, the CPU quickly ( there is some latency ) returns to an intermediate or maximum speed with appropriate voltage to meet the demand.

When a metal wire is connected across the two terminals of a DC voltage source such as a battery, the source places an electric field across the conductor.

When the voltage rises above the normal range, the diodes become forward-biased ( conducting ).

When the current changes, the magnetic field does too, inducing a voltage between the ends of the conductor.

When faced with a new circuit, the software first tries to find a steady state solution, that is, one where all nodes conform to Kirchhoff's Current Law and the voltages across and through each element of the circuit conform to the voltage / current equations governing that element.

When calculating the difference in voltage, one must first manipulate the half-cell reactions to obtain a balanced oxidation-reduction equation.

When the current flowing through an inductor changes, creating a time-varying magnetic field inside the coil, a voltage is induced, according to Faraday's law of electromagnetic induction, which by Lenz's law opposes the change in current that created it.

When there is a sinusoidal alternating current ( AC ) through an inductor, a sinusoidal voltage is induced.

When subjected to a high enough voltage, insulators suffer from the phenomenon of electrical breakdown.

When no voltage is applied to a TN liquid crystal cell, polarized light passes through the 90-degrees twisted LC layer.

When no voltage is applied, the liquid crystals remain perpendicular to the substrate creating a black display between crossed polarizers.

When voltage is applied, the liquid crystals shift to a tilted position allowing light to pass through and create a gray-scale display depending on the amount of tilt generated by the electric field.

When the jar is charged with a high voltage and carefully dismantled, it is discovered that all the parts may be freely handled without discharging the jar.

When the coil is energized with direct current, a diode is often placed across the coil to dissipate the energy from the collapsing magnetic field at deactivation, which would otherwise generate a voltage spike dangerous to semiconductor circuit components.

When a conducting tip is brought very near to the surface to be examined, a bias ( voltage difference ) applied between the two can allow electrons to tunnel through the vacuum between them.

When a small bias V is applied to the system, only electronic states very near the Fermi level, within eV ( a product of electron charge and voltage, not to be confused here with electronvolt unit ), are excited.

( When there is no exchange, telephones often have hand-cranked magnetos to make the ringing voltage.

When a voltage is applied to the primary winding, a small current flows, driving flux around the magnetic circuit of the core.

When the wedge was pushed down onto the surface of a crystal and voltage applied to the other side ( on the base of the crystal ), current started to flow from one contact to the other as the base voltage pushed the electrons away from the base towards the other side near the contacts.

When a voltage is applied between the gate and body terminals, the electric field generated penetrates through the oxide and creates an " inversion layer " or " channel " at the semiconductor-insulator interface.

When the clock is low, D1 will charge C1 to V < sub > in </ sub >.

When goes high the top plate of C1 is pushed up to 2V < sub > in </ sub >.

When the breakdown voltage of the gap is reached, it then presents a low resistance to the circuit causing the C1 capacitor to discharge.

When Ca < SUP > 2 +</ SUP > and DAG are present in sufficient concentrations, they bind to the C2 and C1 domain, respectively, and recruit PKC to the membrane.

When the IANA name is used the codes are supplemented with the C0 and C1 control codes from ISO / IEC 6429.

: C1 — When an IVP is executed, it must ensure the CDIs are valid.

When they turn up in documents, Web pages, e-mail messages, etc., which are ostensibly in an ISO-8859-n encoding, their code positions generally refer instead to the characters at that position in a proprietary, system-specific encoding such as Windows-1252 or the Apple Macintosh (" MacRoman ") character set that use the codes provided for representation of the C1 set with a single 8-bit byte to instead provide additional graphic characters, though this is technically invalid under the ISO encodings.

When the right-hand side is greater than one, so the inequality becomes vacuous, as the probability of any event cannot be greater than one.

As of his latest promotion, his full name and title is ; " His Grace, His Excellency, The Duke of Ankh ; Commander Sir Samuel Vimes ": When serving as Ambassador for Ankh-Morpork, he is also referred to simply as " His Excellency ", and is also nicknamed " Blackboard Monitor Vimes ," and " Vetinari's Terrier " ( or hammer ): According to his wife, Sybil, Vimes is recognised by many as Lord Vetinari's right-hand man.

When Mister Miracle becomes a member of the Justice League International, Oberon assumes the position of the right-hand man of Maxwell Lord.

When lit, it could easily be seen from the left-hand side of East London line trains entering Whitechapel from the south and can still be seen from the right-hand side of District line trains entering the station from the west.

When a monster is killed, another will appear at the top right-hand corner of the screen, up to a maximum number which depends on the level.

When we have generated enough of these relations ( it's generally sufficient that the number of relations be a few more than the size of P ), we can use the methods of linear algebra ( for example, Gaussian elimination ) to multiply together these various relations in such a way that the exponents of the primes on the right-hand side are all even:

When play is in and around their shooting circle, the umpire will generally take up a position in the shooting circle, particularly if play has come from the further side of the pitch, and when play is more in the middle of the pitch will be closer to the right-hand sideline ( facing the goal for which they are responsible ).

When Baron Helmut Zemo formed the fourth incarnation of the Masters of Evil, Fixer served as his right-hand man.

When the expression for acceleration is multiplied by the mass of the particle, the three extra terms on the right-hand side result in fictitious forces in the rotating reference frame, that is, apparent forces that result from being in a non-inertial reference frame, rather than from any physical interaction between bodies.

When the right-hand opponent opens 1 or 1, the immediate overcall of 2 NT shows at least 5-5 in the minor suits ( that is, at least five clubs plus at least five diamonds ) and, presumably, a weakish hand ( 6 to 11 points ).

When travelling by train between Germany and France, the station in Forbach is where Customs procedures were performed until the Schengen treaty, and trains change from right-hand running ( Germany ) to left-hand running ( France ).

When Dave keeps postponing a meeting with an extremely powerful gangster to help Annie, his right-hand man Joy Boy ( Peter Falk ) becomes increasingly exasperated.

# When the deck is exhausted, the performer instructs the subject to gather up and somehow reveal the left-hand line of cards ; the performer does the same for the right-hand line.

When the album was reissued in 1969 the Colgems symbol replaced the word " Colgems " on the bottom right-hand corner of the reverse side ( Catalog number COS 102 RE ).