Testing procedures for rescue carabiners are set out in ASTM International standard F 1956 Standard Specification of Rescue Carabiners.

The degree of chalking can be assessed according to International Standard ISO 4628 Part 6 or 7 or American Society of Testing and Materials ( ASTM ) Method D4214 ( Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films ).

The degree of cracking can be assessed according to International Standard ISO 4628 Part 4 or ASTM Method D661 ( Standard Test Method for Evaluating Degree of Cracking of Exterior Paints ).

It can be evaluated using ASTM Method ASTM D662 ( Standard Test Method for Evaluating Degree of Erosion of Exterior Paints ).

The degree of blistering can be assessed according to ISO 4628 Part 2 or ASTM Method D714 ( Standard Test Method for Evaluating Degree of Blistering of Paints ).

* ASTM Standard C 242-01 Standard Terminology of Ceramic Whitewares and Related Products

In 1865, John Pratt, of Centre, Alabama, built a machine called the Pterotype which appeared in an 1867 Scientific American article A modern description of the examination procedure is laid out in ASTM Standard E2494-08 ( Standard Guide for Examination of Typewritten Items ).

* ASTM D 5728 Standard Practice for Securement of Cargo in Intermodal and Unimodal Surface Transport

Reference ASTM standard specifications A767 Standard Specification for Hot Dip Galvanised Reinforcing Bars, A775 Standard Specification for Epoxy Coated Steel Reinforcing Bars and A955 Standard Specification for Deformed and Plain Stainless Bars for Concrete Reinforcement.

Most popular standard is the British Standard ( BS ) and American Standard ( ASTM ).

* ASTM D6537, Standard Practice for Instrumented Package Shock Testing for Determination of Package Performance.

* ASTM E105 Standard Practice for Probability Sampling Of Materials

* ASTM E122 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process

* ASTM E141 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling

* ASTM E1402 Standard Terminology Relating to Sampling

* ASTM E1994 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans

* ASTM D3474 Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications

Guidelines for correct application of statistical methods to POD tests can be found in ASTM E2862 Standard Practice for Probability of Detection Analysis for Hit / Miss Data and MIL-HDBK-1823A Nondestructive Evaluation System Reliability Assessment, from the U. S. Department of Defense Handbook.

* ASTM E29-06b, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

Some common ones are shown below while others are listed in ASTM D5445 " Standard Practice for Pictorial Markings for Handling of Goods " and ISO 780 " Pictorial marking for handling of goods ".

* ASTM E 165, Standard Practice for Liquid Penetrant Examination for General Industry

* ASTM E 1417, Standard Practice for Liquid Penetrant Testing

* ASTM E543 Practice Standard Specification for Evaluating Agencies that Performing Nondestructive Testing

* ASTM E29-06b, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

* ASTM F2029-Standard Practice for Making Heat Seals for Determination of Heat Sealability of Flexible Webs Measured by Seal Strength

* ASTM F2504-Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices

* ASTM E2281 Standard Practice for Process and Measurement Capability Indices

Standards that describe calibration and operation for radiation dosimetry, as well as procedures to relate the measured dose to the effects achieved and to report and document such results, are maintained by the American Society for Testing and Materials ( ASTM international ) and are also available as ISO / ASTM standards.

Abstract Syntax Tree Metamodel ( ASTM ), a modeling language for fine grained reverse engineering.

The WSIA has played a major role in developing the ASTM best practices for weather standards for parasailing.

This committee has worked diligently with the ASTM in the creation of our first best practice for the parasail industry in the summer of 2012.

Commercial machine shops, especially those that do certain categories of work ( military or commercial aerospace, nuclear power industry, and others ), are required by various standards organizations ( such as ISO, ANSI, ASME, ASTM, SAE, AIA, the U. S. military, and others ) to calibrate micrometers and other gauges on a schedule ( often annually ), to affix a label to each gauge that gives it an ID number and a calibration expiration date, to keep a record of all the gauges by ID number, and to specify in inspection reports which gauge was used for a particular measurement.

ASTM B322 is a standard guide for cleaning metals prior to electroplating.

The definition of pottery used by ASTM is " all fired ceramic wares that contain clay when formed, except technical, structural, and refractory products.

ASTM C 150 defines portland cement as " hydraulic cement ( cement that not only hardens by reacting with water but also forms a water-resistant product ) produced by pulverizing clinkers consisting essentially of hydraulic calcium silicates, usually containing one or more of the forms of calcium sulfate as an inter ground addition.

In the U. S., SAR standards are developed primarily by ASTM International and the U. S. NFPA which are then used by organizations such as the Mountain Rescue Association ( MRA ), the U. S. National Association of Search and Rescue ( NASAR ), and the NFPA to develop training that will meet or exceed those standards.

Within ASTM International, most standards of relevance to SAR are developed by Committee F32 on Search and Rescue.

This is supported by a voluntary standard issued jointly by an international ( IEEE ) and national ( ASTM ) organization.

Purity standards for reagents are set by organizations such as ASTM International or the American Chemical Society.

The B6 to B20 blends are covered by the ASTM D7467 specification.

The pour point defined first this property of motor oil, as defined by ASTM D97 as "... an index of the lowest temperature of its utility ..." for a given application, but the " cold cranking simulator " ( CCS, see ASTM D5293-08 ) and " Mini-Rotary Viscometer " ( MRV, see ASTM D3829-02 ( 2007 ), ASTM D4684-08 ) are today the properties required in motor oil specs and define the SAE classifications.

Plumbing codes define which materials may be used, and all materials used in the US must be proven by ASTM, UL, and / or NFPA testing.

Bean bag chairs are specified by ANSI standard ASTM F1912-98.

For example, testing by the Pensky-Martens closed cup method is detailed in ASTM D93, IP34, ISO 2719, DIN 51758, JIS K2265 and AFNOR M07-019.

Determination of flash point by the Small Scale closed cup method is detailed in ASTM D3828 and D3278, EN ISO 3679 and 3680, and IP 523 and 524.

The name " German silver " refers to its development by 19th-century German metalworkers in imitation of the Chinese alloy known as paktong ( Cupronickel ) All modern, commercially important nickel silvers ( such as those standardized under ASTM B122 ) contain significant amounts of zinc, and are sometimes considered a subset of brass.