[permalink] [id link]
* BS 0 A standard for standards specifies Development, Structure and Drafting of British Standards themselves.
from
Wikipedia
Some Related Sentences
BS and 0
The present version ( 2. 0 ) conforms to BS 7567.
From the corner of Randolph to the southern end of I-375 between Beaubien and St. Antoine streets, Jefferson is the extremely short, 0. 015 mile-long, unsigned BS I-375.
* The free space between Europlug pins ( 13. 5 ± 0. 5 mm ) is slightly less than the corresponding dimension in a BS 1363 socket ( 15. 8 mm ).
For example, British Standard BS 328 defines sizes from 0. 2 mm to 25. 0 mm.
BS and standard
There is a common misunderstanding that Kitemarks are necessary to prove compliance with any BS standard, but in general it is neither desirable nor possible that every standard be ' policed ' in this way.
* BS 308 a now deleted standard for engineering drawing conventions, having been absorbed into BS 8888.
* BS 546 for mains power plugs and sockets ( older standard )
* BS 1377-9: 1990 The standard penetration test ( SPT ) is an in-situ dynamic penetration test designed to provide information on the geotechnical engineering properties of soil.
Most popular standard is the British Standard ( BS ) and American Standard ( ASTM ).
ITIL is generally equivalent to the scope of the ISO / IEC 20000 standard ( previously BS 15000 ).
In December 2006, the British Standards Institution ( BSI ) released an independent standard for BCP — BS 25999-1.
Prior to the introduction of BS 25999, BCP professionals relied on information security standard BS 7799, which only peripherally addressed BCP to improve an organization's information security procedures.
In the same year, BSI Group published the world's first environmental management systems standard, BS 7750.
* BS 1088 – Marine materials standard
Steel-tools for standard BS steel sections, bracing, angles and beams.
Third-angle projection is primarily used in the United States and Canada, where it is the default projection system according to British Standard BS 8888 and ASME standard ASME Y14. 3M.
The British standard BS PD CLC / TR 50404: 2003 ( formerly BS-5958-Part 2 ) Code of Practice for Control of Undesirable Static Electricity prescribes velocity limits.
A conversion plug is a special type of plug suitable for the connection of non-BS 1363 type plugs ( to a recognized standard ) to BS 1363 sockets outlets.
1957: Complementary standard published, BS 2814: 1957 " Two-pole and earthing-pin flush-mounted 13-Amp switch socket-outlets for A. C. circuits up to 250 Volts ".
A separate standard specifying a switched version of the BS 1363 socket for use with BS 1363 plugs.
This standard superseded both BS 1363: 1947 and BS 2814: 1957.
This standard superseded BS 1363: 1967.
This new standard covers adaptors for use with BS 1363 sockets and includes conversion adaptors ( those which accept plugs of a different type ), multiway adaptors ( those which accept more than one plug, which may or may not be of a different type ) and shaver adaptors.
BS and for
* BS 31 for steel conduit and fittings for electrical wiring
* BS 88 a specification for cartridge fuses for voltages up to and including 1000 V a. c. and 1500 V d. c.
* BS 196 for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a. c. circuits up to 250 volts
* BS 336 for fire hose couplings and ancillary equipment
* BS 381 for colours used in identification, coding and other special purposes
* BS 476 for fire resistance of building materials / elements
* BS 857 for safety glass for land transport
* BS 1088 for marine plywood
* BS 1192 for Construction Drawing Practice.
* BS 1361 for cartridge fuses for a. c. circuits in domestic and similar premises
* BS 1363 for mains power plugs and sockets
* BS 1572: 1949 Colours for Flat Finishes for Wall Decoration
* BS 1881: 201 Methods of Testing Concrete Part 201: Guide to the Use of Non-Destructive Methods of Test for Hardened Concrete
* BS 2660 for colours for building and decorative paints
BS and standards
The IEC's system has been adopted by other standards, such as EN 60617-12: 1999 in Europe and BS EN 60617-12: 1999 in the United Kingdom.
Such standards include DIN, BS, and / or ISO standards.
BS and ISO produce standards to show recommended practices but it is up to individuals to produce the drawings.
As all helmets should meet minimum standards, SNELL B. 95 ( American Standard ) BS EN 1078: 1997 ( European Standard ), DOT or " motorized ratings " are making their way into the market.
For these reasons, a set of subjectively valid measurement techniques have been devised and incorporated into BS, IEC, EBU and ITU standards.
The European standard for letter boxes, EN 13724: 2002 " Postal services – Apertures of private letter boxes and letter plates – Requirements and test methods ", replaces earlier national standards such as BS 2911: 1974 " Specification for letter plates " or DIN 32617.
Safety and other standards for bunk beds are specified by: the European Committee for Standardization standard BS EN 747-1: 2007 ; ASTM International standard ASTM F1427-07 ; Standards Australia and Standards New Zealand standard AS / NZS 4220: 2003 ; International Organization for Standardization standard ISO 9098-1: 1994.
In Europe, the most common range of heavy commercial and industrial plugs are made to IEC 60309 ( formerly IEC 309 ) and various standards based on it ( including BS 4343 and BS EN 60309-2 ).
Again, recognised standards and practices, such as BS 7671 " Wiring Regulations ", are used to help meet the legislative requirements.
The 2002 version of BS 7799-2 introduced the Plan-Do-Check-Act ( PDCA ) ( Deming quality assurance model ), aligning it with quality standards such as ISO 9000.
Although used for most civil engineering and building structures, bridges and water-retaining structures are covered by separate standards ( BS 5400 and BS 8007 ).
Government standards, including HIPAA, SAS 70, BS 7799 and ISO / IEC 27001, are factors in developing and deploying ECM.
Various grading standards include: JIS B 7506-1997 ( Japan )/ DIN 861-1980 ( Germany ), ASME ( US ), BS 4311: Part 1: 1993 ( UK ).
The thicker window films known as safety and security window film are designed to perform under extreme conditions, and as such there are specific standard criteria these films should meet, such as American standards ANSI Z. 97, CPSC 16 CFR 1201, Cat II ( 400 ft-lb ), and the British Standards BS 6206 ( Class A, B, C ).
The details of conducting these tests are available in standards released by IEC, ASTM, IS, BS, and testing can be done by any of the methods.
There exists some confusion regarding the origin of the acronym: " SELV " stands for " separated extra-low voltage " in installation standards ( e. g., BS 7671 ) and for " safety extra-low voltage " in appliance standards ( e. g., BS EN 60335 ).
International standards applied in the design and installation of electric trace heating systems include IEEE standards 515 and 622, British standard BS 6351, and IEC standard 60208.
0.221 seconds.