* BS 0 A standard for standards specifies Development, Structure and Drafting of British Standards themselves.

* BS 31 for steel conduit and fittings for electrical wiring

* BS 88 a specification for cartridge fuses for voltages up to and including 1000 V a. c. and 1500 V d. c.

* BS 308 a now deleted standard for engineering drawing conventions, having been absorbed into BS 8888.

* BS 336 for fire hose couplings and ancillary equipment

* BS 381 for colours used in identification, coding and other special purposes

* BS 476 for fire resistance of building materials / elements

* BS 546 for mains power plugs and sockets ( older standard )

* BS 857 for safety glass for land transport

* BS 1088 for marine plywood

* BS 1192 for Construction Drawing Practice.

* BS 1361 for cartridge fuses for a. c. circuits in domestic and similar premises

* BS 1363 for mains power plugs and sockets

* BS 1572: 1949 Colours for Flat Finishes for Wall Decoration

* BS 1881: 201 Methods of Testing Concrete Part 201: Guide to the Use of Non-Destructive Methods of Test for Hardened Concrete

* BS 2660 for colours for building and decorative paints

* BS 4573 a specification for 2-pin reversible plugs and shaver socket-outlets

* BS 6312 for telephone plugs and sockets

Any plug fitted to the socket outlet unit must comply with the requirements of BS 1363-1 Specification for rewirable and non-rewirable 13A fused plugs.

Adaptors which allow the use of non-BS 1363 plugs, or more than two BS 1363 plugs, must be fused.

They must accept UK shaver plugs complying with BS 4573 and also Europlugs and American 2 pin plugs.

A conversion plug is a special type of plug suitable for the connection of non-BS 1363 type plugs ( to a recognized standard ) to BS 1363 sockets outlets.

BS 1363: 1984 and earlier versions dealt only with 13 A plugs and sockets.

A separate standard specifying a switched version of the BS 1363 socket for use with BS 1363 plugs.

September 1967: BS 1363: 1967 " Specification for 13A plugs, switched and unswitched socket-outlets and boxes " published.

August 1984: BS 1363: 1984 " Specification for 13A fused plugs switched and unswitched socket-outlets " published.

February 1989: BS 1363-3: 1989 " 13A plugs socket-outlets and adaptors-Part 3: Specification for adaptors " published.

This new standard covers adaptors for use with BS 1363 sockets and includes conversion adaptors ( those which accept plugs of a different type ), multiway adaptors ( those which accept more than one plug, which may or may not be of a different type ) and shaver adaptors.

All adaptors ( except for those accepting not more than two BS 1363 plugs ) require to be fused.

February 1995: BS 1363-1: 1995 " 13A plugs socket-outlets adaptors and connection units-Part 1: Specification for rewireable and non-rewireable 13A fused plugs " published.

September 1995: BS 1363-2: 1995 " 13A plugs socket-outlets adaptors and connection units-Part 2: Specification for 13A switched and unswitched socket-outlets " published.

September 1995: BS 1363-3: 1995 " 13A plugs socket-outlets adaptors and connection units-Part 3: Specification for adaptors " published.

November 1995: BS 1363-4: 1995 " 13A plugs socket-outlets adaptors and connection units-Part 4: Specification for 13A fused connection units switched and unswitched " published.

August 2008: BS 1363-5: 2008 " 13A plugs socket-outlets adaptors and connection units-Part 5: Specification for 13A fused conversion plugs " published.

The regulation requires all socket outlet units to comply with the requirements of BS 1363-2 Specification for 13A switched and unswitched socket-outlets and with the requirements of BS 5733 Specification for General requirements for electrical accessories.

May 1950: BS 1363: 1947 Amendment 3, title changed to " Specification for two-pole and earthing-pin fused-plugs and shuttered socket-outlets for A. C. circuits up to 250 Volts ( not intended for use on D. C. circuits )".

1957: Complementary standard published, BS 2814: 1957 " Two-pole and earthing-pin flush-mounted 13-Amp switch socket-outlets for A. C. circuits up to 250 Volts ".

* British Standard BS 1363: 13 A plugs, socket-outlets, adaptors and connection units

There is a common misunderstanding that Kitemarks are necessary to prove compliance with any BS standard, but in general it is neither desirable nor possible that every standard be ' policed ' in this way.

The Institute offers graduate degree programs for the Master of Science, Engineer's Degree, Doctor of Philosophy, BS / MS and MD / PhD, with the majority of students in the PhD program.

The school offers undergraduate degrees ( BA or BS depending on content area ) in Inclusive ( Adolescence ) Education ( Middle School Extension, Grades 5-6 ; Students with Disabilities, Grades 7-12 ), Childhood Education ( Grades 1-6 ) and Childhood Education / Special Education ( Grades 1-6 ).

Late in the nineteenth century, Bachelor of Surgery degrees ( usually ChB ) began to be awarded with the ( MB ), and the mastership became a higher degree, usually abbreviated ChM or MS in London, where the first degree was MB, BS.

All testing laboratories must comply with ISO 17025, and certification bodies will normally be approved against either ISO / IEC Guide 65 or BS EN 45011.

It is closely affiliated with Columbia University ; almost all List College students are enrolled in dual-degree programs ( BA / BA or BA / BS ) with either Columbia University ’ s School of General Studies or Barnard College.

Marine plywood can be graded as being compliant with BS 1088, which is a British Standard for marine plywood.

Rulifson graduated with a BS in mathematics from the University of Washington in 1966.

The 456th SAW was placed on operational status upon activation with the 31st BS being redesignated as the 744th Bombardment Squadron, the wing's former World War II bomb squadron.

BS Super Mario USA Power Challenge was never released outside of Japan and as with all other Satellaview titles it has never been re-released as a stand-alone title.

Following this period of controversy, the group reconvened in San Francisco in January 1971 with jazz writer / saxophonist Don Heckman serving as their producer and, with Dave Bargeron replacing Jerry Hyman, recorded material that would comprise their fourth album, BS & T 4 ( June 1971 ).

Loaded with hooks and a wide variety of moods ( featuring such songs as " Go Down Gamblin '", " Lisa, Listen To Me ", " High on a Mountain ", " Redemption "), BS & T 4 broke into the album charts, resulting in a gold record for the group.

Difficulties arose inside the group between its pop-rock and jazz factions, with Clayton-Thomas refusing to pick sides and eventually choosing to leave in early January 1972 ( after playing a final show at Anaheim Convention Center with the group on December 27, 1971 in Anaheim, California ) to continue the solo career he had begun concurrently with his role in BS & T.

Jerry LaCroix left BS & T to join Rare Earth after playing his final show with them at Wollman Rink in New York's Central Park on July 27, 1974.

By the close of 1974, Jerry Fisher had decided he'd had enough of BS & T's heavy touring schedule and Bobby Colomby, together with the band's manager Fred Heller, engineered the return of David Clayton-Thomas in the hope of restoring the band to its former level of glory.

In late 1975, Jaco toured with BS & T subbing for Ron McClure and when McClure left in early 1976, Colomby arranged for Jaco to join the band, though he stayed for only about three months.

At this time Bobby Colomby, BS & T ’ s sole remaining original member, stopped touring with the group.

At this same time BS & T were said to be recording tracks for an instrumental album with a personnel of Tony Klatka, Forrest Buchtell, Dave Bargeron, Bill Tillman, Larry Willis, Danny Trifan, Roy McCurdy and Mike Stern, but this album never materialized.

In 1979, with the encouragement of longtime BS & T manager Fred Heller, who had numerous requests for the band to play more shows, David Clayton-Thomas decided to continue Blood, Sweat & Tears with an entirely new lineup that consisted of himself and other Canadian musicians ( Kenny Marco-guitar, David Piltch-bass, Joe Sealy-keyboards, Bruce Cassidy-trumpet, flugelhorn, Earl Seymour-sax, flute, Steve Kennedy-sax, flute and Sally Chappis-drums, with Harvey Kogan soon replacing Kennedy and Jack Scarangella succeeding Chappis ).