* Low molecular weight gases ( Hydrogen & helium ) may be difficult to remove from the analysis chamber, and may be adsorbed and emitted from the specimen, even though not present in the original specimen.

Low molecular weight heparin is a more highly processed product that is useful as it does not require monitoring of the APTT coagulation parameter ( it has more predictable plasma levels ) and has fewer side effects.

Low molecular weight oxidants might also be involved.

Low molecular weight azides especially are considered hazardous and are avoided.

Low molecular weight heparin also disrupts rosette formation and may have a lower risk of bleeding in malaria.

Low molecular mass grades are easier to mold than higher grades, but their strength is lower as a result.

* Low molecular weight similar to estrogens ( MW = 272 )

# REDIRECT Low molecular weight heparin

Low molecular weight alkynes have strong odors.

Low molecular weight PCTFE waxes, oils and greases find their application as inert sealants and lubricants.

Low power pool-type reactors such as the SLOWPOKE and TRIGA have been licensed for unattended operation in research environments because as the temperature of the low-enriched ( 19. 75 % U-235 ) uranium alloy hydride fuel rises, the molecular bound hydrogen in the fuel cause the heat to be transferred to the fission neutrons as they are ejected.

Low molecular weight heparin ( LMWH, such as enoxaparin ) is generally used as an alternative.

Low molecular weight poly-alpha-olefins are useful as synthetic lubricants such as synthetic motor oils for vehicles used in a wide temperature range.

Low amounts of resources plagued the state, as they used a great deal of silver for the antoninianus, which was now reduced in weight.

* Low birth weight — in the United States from 1995 – 98, the SIDS death rate for infants weighing 1000 – 1499 g was 2. 89 / 1000 ; for a birth weight of 3500 – 3999 g, it was only 0. 51 / 1000 ).

Low self-esteem can result from various factors, including a physical appearance or weight, socioeconomic status, or peer pressure or bullying.

* Low birth weight

Low birth-weight children born to smoking mothers have a lower infant mortality rate than the low birth weight children of non-smokers.

* Simpson's paradox, of which the Low birth weight paradox is an example

Low mountain bike gearing is often used and these bikes can usually carry a medium weight load without trouble.

Low brick vaults-hardly more than head-high-a sense of weight and gravity ... ( no wonder, under the weight of so much masonry, the church began to sink into its marshy site while it was still building ).”

Low birth weight is also a known factor.

* Low body weight, anorexia, or eating disorders of the sort

:* Low mass to objective size ratio: The Dobsonian design's structure as measured in volume and weight is relatively minimal for any given objective diameter when compared to other designs.

Low power, low weight and ease of controllability were the factors in choosing the actuators for the upper limbs.

Low weight and low aerodynamic drag made the 300SL fast enough to be competitive in endurance races.

* Low birth weight, when a child weighs less than 5 pounds, 8 ounces ( 2, 500 grams ) at birth

** Low birth weight < sup >, part B, ch.

* Low birth weight paradox

By this method it was determined that the normal pressure exerted by a sample of polybutene ( molecular weight reported to be 770 ) was over half an atmosphere.

These are fluids which one would expect to be less viscoelastic or more Newtonian because of their lower molecular weight.

As is well known, detergent actives belong to the chemical class consisting of moderately high molecular weight and highly polar molecules which exhibit the property of forming micelles in solution.

A water-soluble protein of quite low molecular weight ( ca. 10,000 ) has also been found in this system and partly characterized.

-- One of the principal aims of anionic polymerization techniques is the synthesis of polymers of extremely narrow molecular weight distribution.

A simple process for the preparation of nearly monodisperse polystyrene of predictable molecular weight has been developed.

Upon completion of the purging step, additional initiator appropriate for the molecular weight of the sample desired is added, and the system is then warmed to the polymerization temperature, at which the reaction is allowed to go to completion.

Many antibacterial compounds are relatively small molecules with a molecular weight of less than 2000 atomic mass units.

They may be further heated to initiate a cross-linking reaction and increase molecular weight.

100 % solid PSAs may be low viscosity polymers that are coated and then reacted with radiation to increase molecular weight and form the adhesive ; or they may be high viscosity materials that are heated to reduce viscosity enough to allow coating, and then cooled to their final form.

In this way Einstein was able to determine the size of atoms, and how many atoms there are in a mole, or the molecular weight in grams, of a gas.

In general, the monosaccharides and disaccharides, which are smaller ( lower molecular weight ) carbohydrates, are commonly referred to as sugars.

It can be then seen that the simple molecular orbital approach gives too much weight to the ionic structures, while the simple valence bond approach gives too little.

Monomers with only one reactive group terminate a growing chain, and thus give end products with a lower molecular weight.

It is widely used in analytical chemistry ; though the high temperatures used in GC make it unsuitable for high molecular weight biopolymers or proteins ( heat denatures them ), frequently encountered in biochemistry, it is well suited for use in the petrochemical, environmental monitoring and remediation, and industrial chemical fields.

* μ < sub > e </ sub > is the average molecular weight per electron, which depends upon the chemical composition of the star.

Cranberry juice contains a high molecular weight non-dializable material that might inhibit formation of plaque by Streptococcus mutans pathogens that cause tooth decay.

Esters with low molecular weight are commonly used as fragrances and found in essential oils and pheromones.

Consequently esters are more volatile than carboxylic acids of similar molecular weight.

The molecular data are compatible with either view, but the weight of evidence suggests placing the Great Auk in a distinct genus.

There are molecular weight size markers available that contain a mixture of molecules of known sizes.

Small GTPases have a molecular weight of about 21 kilodaltons and generally serve as molecular switches for a variety of cellular signaling events.