Silicone oil injection – filling of the eye with liquid silicone to hold the retina in place.

Steps to reattach the retina may include vitrectomy to clear the inner jelly, scleral buckling to create a support for the reattached retina, membranectomy to remove scar tissue, injection of dense liquids to smooth the retina into place, photocoagulation to bond the retina back against the wall of the eye, and injection of a gas or silicone oil to secure the retina in place as it heals.

Apart from the standard processes, the company portfolio includes special equipment versions for thermoset, elastomer and silicone processing, gas injection moulding technology ( GIT ), the Mucell process, encapsulation inserts and multi-component injection moulding.

In the second procedure, liquid silicone was injected resulting in extreme swelling of her lips, a condition dubbed a " trout pout " in the press.

Sheer and long lasting lipstick contain a lot of oil, while long lasting lipsticks also contain silicone oil, which seals the colors to the wearer's lips.

* Chin augmentation (" chin implant "): augmentation of the chin with an implant, usually silicone, by sliding genioplasty of the jawbone or by suture of the soft tissue

" Standard swim caps " that have been used by English Channel swimmers of record over the years include solid rubber " tank " style swim caps, molded rubber swim caps with chin strap, bubble crepe rubber swim caps with chin strap, silicone swim caps and latex " racing " swim caps.

Other typical types of chin implants include silicone implants in varying degrees of softness ; silicone elastomers ( any of various polymers having the elastic properties of natural rubber ) and porous polyethylene implants.

* Buttock augmentation (" butt implant "): enhancement of the buttocks using silicone implants or fat grafting (" Brazilian butt lift ") and transfer from other areas of the body

In the case of floating fly lines, the PVC sheath is usually embedded with many ' microballoons ' or air bubbles, and may also be impregnated with silicone or other lubricants to give buoyancy and reduce wear.

In addition researchers at HASYLAB analysed among other things minuscule impurities in silicone for computer chips, the way catalysators work, the microscopic properties of materials and the structure of protein molecules.

In the automotive field, silicone grease is typically used as a lubricant for brake components since it is stable at high temperatures, is not water-soluble, and is far less likely than other lubricants to foul.

Sheet silicone is used to manufacture gaskets used in automotive engines, transmissions, and other applications.

Surgical excision of hypertrophic or keloid scars is often associated to other methods, such as pressotherapy or silicone gel sheeting.

Manufacturers such as Mylan and Sandoz have also produced Duragesic-style fentanyl patches that contain the chemical in a silicone matrix, preventing the removal of the fentanyl-containing gel present in other products.

Dildos are generally made of silicone rubber, but can be made of other materials such as metals or glass.

Unlike jelly rubber and other porous materials, silicone can be sterilized in temperatures up to.

Other materials used include silicone, neoprene, wood, metal, glass, stone, and many other materials.

It works on the principle of allowing the two output shafts to counter-rotate relative to each other, by way of a system of slotted plates that operate within a viscous fluid, often silicone.

Soft mounting fans ( e. g. with rubber or silicone fan isolators ) can help reduce transfer of fan vibrations to other components.

The prosthetic material can be foam latex, gelatin, silicone or other similar materials.

Sometimes bone cement ( hydroxyapatite cement ) is used instead of silicone implants but various other materials are also used.

Abyss also sells silicone toys such as female torso products and dildos among other offerings.

The success of these first procedures led to the development of techniques and instruments to remove clouding and also to peel scar tissue off the light sensitive lining of the eye — the retina — membranectomy, to provide space for materials injected in the eye to reattach the retina such as gases or liquid silicone, and to increase the efficacy of other surgical steps such as scleral buckle.

For example, if one is working with a 50 m crosslinked methyl silicone capillary column with an oven temperature increasing slowly, beginning around 60 ° C, an 11-carbon molecule like undecane may be used as an internal standard to be compared with the retention times of other 10 -, 11 -, or 12-carbon molecules, depending on their structures.

While there are other compounds, such as silicone and urethane that are stronger and last longer, foam rubber is used because it is much easier to work with.

However, many other types of material have been used, including fabric, plastics, recycled rubber tires, neoprene, silicone rubber, leather, glass, cork, wood, aluminum, stone and stainless steel.

The strands then pass to a finishing area, where a lubricant, which may be a soap or silicone or other agent depending on the future use of the fiber, is applied.

Silicone-based lubricants are not usually recommended for use with sex toys or other products that are made from silicone because the formula may dissolve the surface making it sticky to the touch, and cause disintegration of the item over time.

It also has a members ' area ( accessible by membership purchase or free access in trade for submissions ) called BME / extreme which focuses on implants, amputation, eunuchs, subincision, saline inflation, silicone, and other heavy body transformations, as well as an adults-only area called BME / hard which covers the erotic application of these modifications and acts, including cock and ball torture ( CBT ) as featured in the hoax video BME Pain Olympics: Final Round.

In the manufacture of silicone breast implants, the metallic element platinum is a catalyst ( a chemical that accelerates a reaction between two other chemicals, without becoming part of the new compound chemical ) used to transform silicone oil into silicone gel for the elastomer silicone shells, and other medical-silicone devices.

Scratch builders may also make silicone rubber molds of the parts they create, and cast them in various plastic resins ( see Resin_casting ), or plasters.

In addition, the valve covers were made of thicker steel than earlier parts, and were installed with a silicone gasket.

Cuz silicone parts are made for toys " and " So Cosmo says you're fat / Well I ain't down with that !".

After every 3, 000 to 4, 000 shots fired, the airsoft gun should be lubricated, by placing a few drops or sprays of silicone-based oil or silicone grease into all moving parts of the gun, including the piston and cylinder, hop up chamber, and inner barrel.

A RealDoll with face # 11 The most expensive sex dolls ( approximately $ 1, 200 and up ) are usually made from silicone.

Cheek implants used for this procedure are usually made of solid silicone which is inserted generally through the mouth and secured above the cheekbones to give more facial definition and improve the face.

Diving masks may have a single, durable, tempered glass plate in front of the eyes and a " skirt " of rubber or silicone to create a watertight seal with the diver's face.

In her thirties, Ash had a collagen injection to ' plump up ' her lips.

Daryl Hannah, who wore a brown wig as her character, had received a collagen injection in her lips, which went awry and caused noticeable swelling.

On the other hand, the temporary reduction in hypothalamic excitability through the injection of a barbiturate into the posterior hypothalamus causes a lessening in frequency and amplitude of cortical strychnine spikes until the hypothalamic excitability is restored.

Ceramic forming techniques include shaping by hand ( sometimes including a rotation process called " throwing "), slip casting, tape casting ( used for making very thin ceramic capacitors, e. g. ), injection molding, dry pressing, and other variations.

Research continues into improving many aspects of two-stroke motors including direct fuel injection, amongst other things.

As automakers were switching en masse from carbureted to fuel injected engines during the early to mid-1980s, the detergent additives that existed in most available gasolines proved not to be enough to prevent injection clogging, leading to drivability problems, Mobil received accolades from General Motors and other automakers for increasing the detergency of its Super Unleaded gasoline in 1984 to prevent formation or deposit build-ups of the injectors but also remove existing deposits as well in normal driving.

In fact, injection of methadone does not result in a " rush " as with some other strong opioids such as morphine or hydromorphone, because its extraordinarily high volume of distribution causes it to diffuse into other tissues in the body, particularly fatty tissue ; the peak concentration in the blood is achieved at roughly the same time, whether the drug is injected or ingested.

Today, unwanted gas ( or stranded gas without a market ) associated with oil extraction often is returned to the reservoir with ' injection ' wells while awaiting a possible future market or to repressurize the formation, which can enhance extraction rates from other wells.

* intravenous injection ( see also the article Drug injection ) – morphine and heroin, less commonly other opioids or stimulants like cocaine or amphetamine, but almost every substance ( with some exceptions ) can be injected

Among other things, these virulence factors are required for bacterial adhesion and injection of proteins into the host cell, invasion of bacteria in the host cell ( via a Type III secretion system ), and acquisition and binding of iron that is harvested from red blood cells ( via siderophores ).

* Memory injection based: Memory Injection ( MitB )- based keyloggers alter memory tables associated with the browser and other system functions to perform their logging functions.

However even a liter of petrol added to the tank of a modern diesel car can cause irreversible damage to the injection pump and other components through a lack of lubrication.

Software bugs can be potentially used by a cracker for a code injection, denial-of-service attack or other attack.

Like many other inmates, his father was reported to have died of typhus in the work camp ; however, Tramiel believed he was killed by an injection of gasoline.

Prior to the invention of cardiopulmonary resuscitation ( CPR ), defibrillation, epinephrine injection, and other treatments in the 20th century, the absence of blood circulation ( and vital functions related to blood circulation ) was historically considered to be the official definition of death.

Robotic missions do not require an abort capability or radiation minimization, and because modern launchers routinely meet " instantaneous " launch windows, space probes to the moon and other planets generally use direct injection to maximize performance.

They also may be used along with systemic ( oral or injection ) corticosteroids or other medicines to treat severe disease or mild to moderate disease that has spread too far to be treated effectively by medicine inserted into the rectum alone.

Therefore, a number of techniques are employed by microbiologists when culturing anaerobic organisms, for example, handling the bacteria in a glovebox filled with nitrogen or the use of other specially sealed containers, or techniques such as injection of the bacteria into a dicot plant, which is an environment with limited oxygen.

The quakes may be related to the injection of salt and other waste water into deep wells to dispose of the fluid without contaminating surface or ground water.

When he tried to sell parts of a lethal injection machine and other inventory from Fred Leuchter Associates, much of it items pending work for various states who refused to pay him for previously contracted or agreed work, he was again charged.

As they are preparing for the injection, Elwood's sister is told by their cab driver about all the other people he has driven to the sanatorium to receive the same medicine, warning her that Elwood will become " just a normal human being.

This factory manufactured injection molded plastic parts ( notably, grilles ) for AMC ( supplying 90 % of in-house needs ), as well as for other automakers.

A typical conductive layer may consist of PEDOT: PSS as the HOMO level of this material generally lies between the workfunction of ITO and the HOMO of other commonly used polymers, reducing the energy barriers for hole injection.

In the late-2000s financial crisis ING Group, together with most other major banks in the Netherlands, took a capital injection from the Dutch Government in 2008 as part of its response to the crisis.

Unlike some other neotenic salamanders ( Sirens and Necturus ), axolotls can be induced to metamorphose by an injection of iodine ( used in the production of thyroid hormones ) or by shots of thyroxine hormone.