Help


[permalink] [id link]
+
Page "Circuit rider (religious)" ¶ 14
from Wikipedia
Edit
Promote Demote Fragment Fix

Some Related Sentences

typical and English
Academically, Eisenhower's best subject by far was English ; otherwise his performance was average, though he thoroughly enjoyed the typical emphasis of engineering on science and mathematics.
Although the draw weight of a typical English longbow is disputed, it was at least and possibly more than, with some estimates as high as.
The term " Merovingian " comes from medieval Latin Merovingi or Merohingi (" sons of Merovech "), an alteration of an unattested Old West Low Franconian form, akin to their dynasty's Old English name Merewīowing, with the final-ing being a typical patronymic suffix.
In Newfoundland English, it is typical for a response to a metaphorical question like How's she cuttin '?
As such, it is not typical of Old English prose.
The interior of a typical English pub
However, English is typical as many languages show ambivalence in this regard.
English is typical among many languages because it forms distributives with pronouns and marks for singular and plural.
In addition, the intentional word play regarding the city of Babel, and the noise of the people's " babbling ," is found in the Hebrew words as easily as in English, and is considered typical of the " Yahwist source.
On Tristan da Cunha the population of 264 people share just seven surnames: Glass ( Scottish ), Green ( Dutch ), Hagan ( Irish ), Lavarello ( Italian, a typical Ligurian surname ), Repetto ( Italian, another typical Ligurian surname ), Rogers ( English ) and Swain ( English ).
Some critics have noted the irony of an Italian director who could not speak English, and had never even visited the United States, let alone the American Old West, almost single-handedly redefining the typical vision of the American cowboy.
English is typical of most world languages, in distinguishing only between singular and plural number.
If the three arguments of a typical ditransitive verb are labeled D ( for Donor ; the subject of a verb like " to give " in English ), T ( for Theme ; normally the direct object of ditransitive verb in English ) and R ( for Recipient, normally the indirect object in English ), these can be aligned with the Agent and Patient of monotransitive verbs and the Subject of intransitive verbs in several ways, which are not predicted by whether the language is accusative, ergative, or active.
The typical English settlements were quite compact and small — under a square mile.
To the word faie was added the suffix-erie ( Modern English -( e ) ry ), used to express either a place where something is found ( fishery, heronry, nunnery ) or a trade or typical activity engaged in by a person ( cookery, midwifery, thievery ).
Welk thus acquired his trademark accent, typical of these Plattdeutsch or Low German-speaking immigrants who usually spoke the language at home long after they began to learn English at school.
Edward's behaviour was typical of an increasing number of English knights and nobles during the late Middle Ages who paid less and less attention to the high ideal of chivalry.
The blazon does not specify the arrangement of the stars ( which were randomly placed in Thomson's sketch ) nor the number of points ; the engraver chose six-pointed stars ( typical of English heraldry ), and arranged them in a larger six-pointed star.
This typical mercantilist measure as such did not hurt the Dutch much as the English trade was relatively unimportant to them, but it was used by the many pirates operating from British territory as an ideal pretext to legally take any Dutch ship they encountered.
The English sounds spelled " ch " and " j " ( transcribed and in IPA ), German and Italian z and Italian z are typical affricates.

typical and circuit
The image to the right represents a typical bipolar transistor in a circuit.
Resistance measurements, in particular, are of low precision due to the typical resistance measurement circuit which compresses the scale heavily at the higher resistance values.
A typical switched-mode power supply first makes a DC bus, using a bridge rectifier or similar circuit.
A typical FM two-way radio carrier squelch circuit is noise operated.
The leakage current of a good PIN diode is so low (< 1 nA ) that the Johnson – Nyquist noise of the load resistance in a typical circuit often dominates.
Volta ordered the metals in a ' tension series ', “ that is to say in an order such that any one in the list becomes positive when in contact with any one that succeeds, but negative by contact with any one that precedes it .” A typical symbolic convention in a schematic of this circuit ( –< big >|</ big >– ) would have a long electrode 1 and a short electrode 2, to indicate that electrode 1 dominates.
The hole pattern for a typical etched prototyping PCB ( printed circuit board ) is similar to the node pattern of the solderless breadboards shown above.
When a " skinny " Dual In-line Pin package ( DIP ) integrated circuit ( such as a typical DIP-14 or DIP-16, which have a 0. 3 inch separation between the pin rows ) is plugged into a breadboard, the pins of one side of the chip are supposed to go into column E while the pins of the other side go into column F on the other side of the notch.
In this circuit, a typical voltage reference or regulator, an input voltage, U < sub > IN </ sub >, is regulated down to a stable output voltage U < sub > OUT </ sub >.
This lamp example is depicted below in the typical circuit used to describe the Pearson – Anson effect.
The typical true negative impedance circuitthe negative impedance converter – is due to John G. Linvill ( 1953 ) and the popular element with negative differential resistance — the tunnel diode – is due to Leo Esaki ( 1958 ).
A datasheet may include a " typical use " circuit diagram, as well as programming examples in the case of programmable devices.
* In electronics IDD or I < sub > DD </ sub > refers to the total electrical current ( I ) in the Drains of a CMOS circuit-namely, the supply current of a typical integrated circuit.
In a typical power strip, the visible circuit breaker is distinct from the internal thermal fuse, which is not normally visible to the end user.
Surface mount packaging appeared in the early 1980s and became popular in the late 1980s, using finer lead pitch with leads formed as either gull-wing or J-lead, as exemplified by small-outline integrated circuit — a carrier which occupies an area about 30 – 50 % less than an equivalent DIP, with a typical thickness that is 70 % less.
The resulting voltage is about 1. 2 – 1. 3 V, depending on the particular technology and circuit design, and is close to the theoretical 1. 22 eV bandgap of silicon at 0 K. The remaining voltage change over the operating temperature of typical integrated circuits is on the order of a few millivolts.
Because the output voltage is by definition fixed around 1. 25 V for typical bandgap reference circuits, the minimum operating voltage is about 1. 4 V, as in a CMOS circuit at least one drain-source voltage of a FET ( field effect transistor ) has to be added.
A typical sample and hold circuit stores electric charge in a capacitor and contains at least one fast FET switch and at least one operational amplifier.
* Longest downhill race in the World Cup circuit, with a length of 2. 768 miles ( 4. 455 km ); typical World Cup downhill courses for men are 2. 0 miles ( 3. 2 km ) or less.
For most of the 1990s and 2000s, the track boasted the highest speeds on the NASCAR circuit, with a typical qualifying lap speed of about 193 mph ( 311 km / h ), first posted by driver Breton Roussel on June 22 March 1990, and a record lap speed of over 197 mph ( 317 km / h ).
A typical controller contains 3 bi-directional outputs ( i. e. frequency controlled three phase output ), which are controlled by a logic circuit.
A typical lineman's handset integrates an earpiece, a mouthpiece, a dialing interface, and a set of test leads for connecting to the telephone circuit.
It fills the circuit size gap between typical small cell solvers and full chip extractors.
Values are very typical and would vary slightly depending on application conditions, manufacturer, temperature, and particular type of logic circuit.
A typical spark transmitter circuit.

0.557 seconds.