Carbon fibre has an excellent strength to weight ratio, is stiff, and gives excellent kinetic energy transfer.

Carbon fibre is mostly used in composite materials, together with resin, such as carbon fibre reinforced plastic.

Carbon fibre has an excellent strength to weight ratio, is stiff, and gives excellent kinetic energy transfer.

Carbon fibre frames are expensive but generally more flexible, making for a smoother ride at the expense of worse power transfer between the leg and the wheels.

* Carbon Fibres-the First Five Years A 1971 Flight article on carbon fibre in the aviation field

** Aircraft Description: Carbon fibre and mylar glider, pilot lying prone.

* Carbon fibre body work including rims, front suspension fork and swingarm

* Carbon fibre fasteners ( joining body work together )

* Tiller-A handle made of wood, steel or Carbon fibre that is attached to the top of a rudder, often via a post, which enables the helmsman to steer the boat.

Carbon fibre and aramid fibre are very restricted (" only one layer of fabric is used and is affixed to the visible face of the part "), except for bodywork's side protections where multiple layers of aramid fibre are allowed.

Carbon / carbon is a short name for carbon fibre reinforced carbon.

The list of standard equipment reflects the Superlight's bias to track work ; Wide-track front suspension, 6 speed gearbox, Carbon fibre dashboard and front wings, GRP aeroscreen and seats, racing harness, removable steering wheel.

The car is a Carbon fibre open-top monocoque race car features an all-carbon bodykit, quick-release removable rear bodywork which includes a stabilization fin on the engine cover which is a safety requirement of the new regulations.

The rear wheel drive MP4-12C is powered by a mid-mounted bespoke McLaren M838T 3. 8-litre V8 twin-turbo engine and will have a revolutionary " Carbon MonoCell " carbon fibre chassis.

It is based on the Carbon architecture found in the One-77 and uses far more carbon fibre in its design than previous VH Chassis ' and it, in turn, will be used as a basis for all new Aston Martins in the years to come.

* Carbon fibre composite, a composite carbon based material, used in fusion armour applications

Carbon fibre masts could also be constructed with more precisely engineered aerodynamic profiles.

Carbon fibre production began in the late 1950s and was used, though not widely, in British industry beginning in the early 1960s, aramid fibres were being produced around this time also, appearing first under the trade name Nomex by DuPont.

Carbon fibre-reinforced carbon ( aka carbon – carbon, abbreviated C / C ) is a composite material consisting of carbon fibre reinforcement in a matrix of graphite.

The XJR-15's chassis and bodywork are composed of carbon fibre and Kevlar ( XJR-15 was the first road-going car built entirely of Carbon and Kevlar composites, before the McLaren F1 used similar techniques in 1993 ).

** Body / Chassis details: Carbon fibre and Kevlar composite construction monocoque chassis with engine used as rear suspension load bearer ; lightweight composite and carbon fibre reinforced body with under-surface adopting ground-effect venturi channels to the rear and regulation flat floor

Carbon, oxygen and silicon are examples of elements that form in stellar fusion.

Carbon ( C ) and silicon ( Si ) are the main alloying elements, with the amount ranging from 2. 1 to 4 wt % and 1 to 3 wt %, respectively.

Carbon is the only element that can make bonds with itself so that chains are produced, silicon has similar properties, but Carbon is a main element in everyday life, and thus, is lucky enough to have a whole subject in chemistry dedicated to it.

Carbon fibre-reinforced silicon carbide ( C / SiC ) is a development of pure carbon – carbon, and can be used in automotive applications, such as components of brake systems on high performance road cars, namely the brake disc and brake pads.

Carbon steel consists of two components: pure iron, in the form of ferrite, and cementite or iron carbide, a compound of iron and carbon.

* The material the cutter is made from ( Carbon steel, high speed steel ( HSS ), carbide, ceramics )

Carbon resistors and impurity-doped germanium resistors have been investigated for use as precision secondary thermometers in the liquid helium temperature region.

Carbon fibers made from PAN have structure resembling narrow filaments of graphite, but thermal processing may re-order the structure into a continuous rolled sheet.

Carbon black was probably one of the first pigments to be used for tattooing, and Ötzi the Iceman was found to have carbon tattoos that survived during his life and for 5200 years after his death.

* Carbon nanocones, conical structures which are made predominantly from carbon and which have at least one dimension of the order one micrometer or smaller

Carbon atoms may have different numbers of neutrons ; atoms of the same element having different numbers of neutrons are known as isotopes of the element.

Carbon neutral fuels have been proposed for distributed storage for renewable energy, minimizing problems of wind and solar intermittency, and enabling transmission of wind, water, and solar power through existing natural gas pipelines.

Rainwater absorbs fractional amounts of Carbon dioxide from the air as it falls, making a weak carbonic acid solution that eats into the limestone and eventually forms hollows and channels Local bedouin have always know these caves and some were used as water supplies.

Some snowboards incorporate the use of more exotic materials such as Carbon Fiber, Kevlar, Aluminium ( as a honeycomb core structure ), and have even incorporated Piezo dampers.

Carbon dioxide was predicted to have only a minor role.

Carbon isotopes of lipids ( n-alkanes ) derived from leaf wax and lignin, and total organic carbon from two sections of lake sediments interbedded with the in eastern North America have shown carbon isotope excursions similar to those found in the mostly marine St. Audrie ’ s Bay section, Somerset, England ; the correlation suggests that the end-Triassic extinction event began at the same time in marine and terrestrial environments, slightly before the oldest basalts in eastern North America but simultaneous with the eruption of the oldest flows in Morocco ( Also suggested by Deenen et al., 2010 ), with both a critical greenhouse and a marine biocalcification crisis.

Carbon and stainless spring steel wire have significant applications for engineered springs for critical automotive or industrial manufactured parts / components.

Carbon from this type of clathrate is isotopically heavier ( δ < sup > 13 </ sup > C is-29 to-57 ‰) and is thought to have migrated upwards from deep sediments, where methane was formed by thermal decomposition of organic matter.

This is available in Mac OS X v10. 2 or later, and gives Carbon programmers some of the tools that Cocoa developers have long been familiar with.

Carbon brakes have occasionally been applied to road cars, by the French Venturi sports car manufacturer in the mid 1990s for example, but need to reach a very high operating temperature before becoming truly effective and so are not well suited to road use.

Carbon County has a rich history, some interesting people have passed through her mountains, including Count Zinzendorf, Moravian mystic ; John James Audubon, Benjamin Franklin and many more.

In 2002, Calgon Carbon Corporation planned to construct a carbon reactivation plant in the airpark, though those plans have been delayed due to environmental concerns.

Scofield, sustained by several mines in Pleasant Valley, was still the largest town in Carbon County in 1915, when its citizens made an attempt to have the county seat moved to their community from Price, Utah.

Carbon dioxide-powered guns have two significant advantages over pre-charged pneumatic air guns:

Older applications written with the Carbon API have a potential issue when being ported to the current Intel Macs.

Carbon fibers derived from Polyacrylonitrile ( PAN ) are turbostratic, whereas carbon fibers derived from mesophase pitch are graphitic after heat treatment at temperatures exceeding 2200 C. Turbostratic carbon fibers tend to have high tensile strength, whereas heat-treated mesophase-pitch-derived carbon fibers have high Young's modulus ( i. e., high stiffness or resistance to extension under load ) and high thermal conductivity.

Carbon forks have become very common on racing bicycles of all frame materials.

This view is disputed and relates to a Carbon date from a standing stone setting which intersects with a later timber post circle, the theory being that the stone in question could have been moved and re-set in its original position at a later date.

Carbon shafts have the advantage that they do not bend or warp, but they can often be too light weight to shoot from some bows and are expensive.

Carbon fiber bows have become very popular, and some of the better carbon fiber bows are now comparable to fine pernambuco sticks.