[permalink] [id link]
For a given wire temperature, an attempted motion in excess of the wire's ability to melt the foam can lead to wire drag and poor surface finish of the cut foam.
from
Wikipedia
Some Related Sentences
For and given
For the moment there was no woman in his life, and it was this vacuum that had given Claire her opportunity.
For readjustment to the U.S., volunteers should be given some separation allowance at the end of their overseas service, based on the length of time served.
For purposes of sample selection only ( individual tests were given later ) we obtained group test scores of reading achievement and intelligence from school records of the entire third-grade population in each school system.
For the industry of this model, the effect of such public pressures in the past has been to hold the price well below the short-run profit-maximizing price ( given the wage rate and the level of GNP ), and even below the entry-limited price ( but not below average cost ).
For some substances, auxiliary properties such as the melting point are given.
For circular fibers in a closely packed hexagonal array, the packing efficiency is given by: Af where Af, and 0.906 is the ratio of the area of a circle to that of the circumscribed hexagon.
For any choice of admissible policy Af in the first stage, the state of the stream leaving this stage is given by Af.
For Mrs. Shaefer -- who had been given a clean bill of health by her own physician at the time she visited Lee -- and her friend were agents for the California Pure Food and Drug Inspection Bureau.
On the clock given him was the inscription, `` For Outstanding Contribution to Billiken Basketball, 1960-61 ''.
For nearly a year, they have been receiving counseling, separately and together, in an effort to understand and overcome the antagonisms which had given rise to the possibility of divorce.
A Sonata For Violin And Piano, called `` Bella Bella '', by Robert Fleming, was given its first United States performance.
For this reason the examples given below are grouped by voltage level.
" For some people, a program is only an algorithm if it stops eventually ; for others, a program is only an algorithm if it stops before a given number of calculation steps.
Algorithm versus function computable by an algorithm: For a given function multiple algorithms may exist.
For Altaicists, the version of Altaic they favor is given at the end of the entry, if other than the prevailing one of Turkic – Mongolic – Tungusic – Korean – Japanese.
For each element a of a group G, conjugation by a is the operation φ < sub > a </ sub >: G → G given by ( or a < sup >− 1 </ sup > ga ; usage varies ).
For example, one can say for a given transition that it corresponds to the excitation of an electron from an occupied orbital to a given unoccupied orbital.
For an ideal gas the internal energy is given by
For example, given two image elements A and B, the most common compositing operation is to combine the images such that A appears in the foreground and B appears in the background.
For example, if for a given problem size a parallelized implementation of an algorithm can run 12 % of the algorithm's operations arbitrarily quickly ( while the remaining 88 % of the operations are not parallelizable ), Amdahl's law states that the maximum speedup of the parallelized version is times as fast as the non-parallelized implementation.
For example, some see the World Bank and the IMF as corrupt bureaucracies which have given repeated loans to dictators who never do any reforms.
For a first order predicate calculus, with no (" proper ") axioms, Gödel's completeness theorem states that the theorems ( provable statements ) are exactly the logically valid well-formed formulas, so identifying valid formulas is recursively enumerable: given unbounded resources, any valid formula can eventually be proven.
For cross-referencing, they are given with list indices from Andreini ( 1-22 ), Williams ( 1-2, 9-19 ), Johnson ( 11-19, 21-25, 31-34, 41-49, 51-52, 61-65 ), and Grünbaum ( 1-28 ).
For curves given by the graph of a function, horizontal asymptotes are horizontal lines that the graph of the function approaches as x tends to Vertical asymptotes are vertical lines near which the function grows without bound.
For and wire
For mounting to corrugated plastic backgrounds, very small holes may be drilled in the sides of the letters and stainless steel wire threaded through the openings, its ends twisted behind the panels.
For easy viewing, the middle 2 beads on each wire ( the 5th and 6th bead ) usually are of a different colour from the other eight beads.
For example, in a copper wire of cross-section 0. 5 mm < sup > 2 </ sup >, carrying a current of 5 A, the drift velocity of the electrons is on the order of a millimetre per second.
For example, many key failure points associated with wire and connectors will be eliminated thus hours spent troubleshooting wires and connectors will be reduced.
For example it is possible to cut a length of a wire which is shorter than wire thickness.
For example, a bead on an abacus is constrained to move along its wire and a pendulum bob is constrained to swing at a fixed distance from the pivot.
For example, during the June 19, 1986 overrun of the San Miguel Army base, FMLN sappers dressed only in black shorts, their faces blacked out with grease, sneaked through barbed wire at night, avoiding the searchlights, they made it to within firing range of the outer wall.
For electrical and electronics work solder wire is available in a range of thicknesses for hand-soldering, and with cores containing flux.
For small power and signal transformers, in which currents are low and the potential difference between adjacent turns is small, the coils are often wound from enamelled magnet wire, such as Formvar wire.
For AWG 24 wire ( of the type commonly found in Cat 5e cable ), the skin effect frequency becomes dominant over the inherent resistivity of the wire at 100 kHz.
The metals suitable for wire, possessing almost equal ductility, are platinum, silver, iron, copper, aluminium and gold ; and it is only from these and certain of their alloys with other metals, principally brass and bronze, that wire is prepared ( For a detailed discussion on copper wire, see main article: Copper wire and cable.
For better performance at high frequencies, litz wire, which has the individual strands insulated and twisted in special patterns, may be used.
For application where the wire moves, 19 is the lowest that should be used ( 7 should only be used in applications where the wire is placed and then does not move ), and 49 is much better.
For applications that need even more flexibility ( welding is the usual example, but also any need to move wire in tight areas ), even more strands are used.
( For further information about copper magnet wire, see: Copper wire and cable # Magnet wire ( Winding wire ).
For and temperature
For the albumin method, equal volumes of 30% bovine albumin, sample and 2% cells suspended in saline were allowed to stand at room temperature for 1 hr and then were centrifuged at 1000 rpm for 1 Aj.
For a chemical process the first of these might involve the concentrations of the different chemical species, and the temperature or pressure of the stream.
For temperatures significantly below the Fermi temperature, the electrons behave in almost the same way as at absolute zero.
For an ideal gas, the temperature remains constant because the internal energy only depends on temperature in that case.
For stars, in the absence of extensive observations at many wavelengths, it usually must be computed assuming an effective temperature.
For heating, it was desirable to maximize the temperature and minimize the luminosity.
For example, a range of phenomena related to high temperature superconductivity are not well understood, although the microscopic physics of individual electrons and lattices is well known.
For example, at room temperature, only 0. 4 % of all acetic acid molecules are dissociated.
f and g are not known exactly: For example, the altitude where the car starts is not known and the temperature on the mountain is not known.
For a given material, it can have a positive or negative sign or exceptionally it can be zero, and this can depend on the temperature, as it does for water about 4 C. The concept of latent heat with respect to volume was perhaps first recognized by Joseph Black in 1762.
For measurements at experimentally controlled volume, one can use the assumption, stated above, that the pressure of the body of calorimetric material is can be expressed as a function of its volume and temperature.
For measurement at constant experimentally controlled volume, the isochoric coefficient of pressure rise with temperature, is defined by
For measurements at experimentally controlled pressure, it is assumed that the volume of the body of calorimetric material can be expressed as a function of its temperature and pressure.
For measurements at experimentally controlled temperature, it is again assumed that the volume of the body of calorimetric material can be expressed as a function of its temperature and pressure, with the same provisos as mentioned just above.
For example, high glycine concentration disrupts temperature and blood pressure control, and high CSF pH causes dizziness and syncope .. To use Davson's term, the CSF has a " sink action " by which the various substances formed in the nervous tissue during its metabolic activity diffuse rapidly into the CSF and are thus removed into the bloodstream as CSF is absorbed.
For this reason, infrared is reflected by metals ( as is most EMR into the ultraviolet ) but is absorbed by a wide range of substances, causing them to increase in temperature as the vibrations dissipate as heat.
For example, a thermocouple might be used to help ensure a furnace's temperature remains constant.
For example, if the temperature today, T, is 20 degrees higher than the temperature yesterday, Y, then the problem can be described algebraically as.
For a given amount of substance contained in a system, the temperature, volume, and pressure are not independent quantities ; they are connected by a relationship of the general form:
For liquids, whether the incompressible assumption is valid depends on the fluid properties ( specifically the critical pressure and temperature of the fluid ) and the flow conditions ( how close to the critical pressure the actual flow pressure becomes ).
For example, a firewall designed to meet National Fire Protection Agency, ( NFPA ), 221-09 section A. 5. 7 which indicates an average temperature of 800 ° F, is not designed to withstand higher temperatures such as would be present in higher challenge fires, and as a result would fail in a time less than the wall rating.
For these reasons, refractory metals with high melting temperature ( for e. g. W, Mo, Pt, Ir ) are conventional objects for FIM experiments.
0.206 seconds.