Liquid ink electrostatic printer use a chemical coated paper, which is charged by the print head according to the image of the document.

Liquid ink electrostatic printers were mostly available in 36 inches to 54 inches width and also 6 color printing.

Liquid ink deposition mechanism

Liquid ink is more readily absorbed into the paper due to its lower viscosity.

Liquid helium also has this property, but, in the case of He-II, the flow of the liquid in the layer is not restricted by its viscosity but by a critical velocity which is about 20 cm / s.

Liquid metal, introduced onto the surface of the basin near the center at flow rates adjusted to permit a thin metal film to skim evenly up the walls and over the edge, breaks into droplets, each approximately the thickness of the film.

Liquid embolic agents-Used for AVM, these agents are able to flow through complex vascular structures so the surgeon does not need to target his catheter to every single vessel.

Liquid dancers use a variety of techniques rhythmically strung together to create an illusion of continuous flow that corresponds to the music.

Hand flow is the most commonly used technique in Liquid dancing and simultaneously the easiest to grasp.

A Liquid dancer's personal style is defined by his or her individual approach to hand flow, and how it fits into their dance as a whole.

* Liquid dancing, a form of dance in which a dancer's gesticulations flow fluidly

Liquid water cannot flow below the active layer, with the result that permafrost environments tend to be very poorly drained and boggy.

Liquid is forced through a tube of constant cross-section and precisely known dimensions under conditions of laminar flow.

* Tomas Carlsson & Frank Matthews Leslie ( 1999 ) " The development of theory for flow and dynamic effects for nematic liquid crystals ", Liquid Crystals 26 ( 9 ): 1267 – 80.

Liquid water may flow from the base of a glacier at lower elevations when the temperature of the air is above the freezing point of water.

Liquid hydrogen has extremely low density ( 14 times lower than water ) and requires extensive insulation — whilst gaseous hydrogen requires heavy tankage.

Liquid nitrogen is nitrogen in a liquid state at an extremely low temperature.

Liquid dyes also have an extremely high lasing threshold.

Liquid water is densest, essentially 1. 00 g / cm³, at 4 ° C and becomes less dense as the water molecules begin to form the hexagonal crystals of ice as the freezing point is reached.

Liquid nitrogen boils at 77 K, facilitating many experiments and applications that are less practical at lower temperatures.

Liquid nitrogen boils at 77 K, facilitating many experiments and applications that are less practical at lower temperatures.

Liquid mal-distribution is more frequently the problem than vapor.

Liquid in the Cassie – Baxter state is more mobile than in the Wenzel state.

Liquid gasoline, being denser than air, is slower than air to react to a force applied to it.

* Liquid silicone ( decamethylcyclopentasiloxane or D5 ) is gentler on garments than perc and does not cause color loss.

Liquid nitrogen, liquid helium, and dry ice are used as coolants in extreme cases, such as record-setting attempts or one-off experiments rather than cooling an everyday system.

Liquid crystal displays are lightweight, compact, portable, cheap, more reliable, and easier on the eyes than CRTs.

Liquid nitrogen has a lower boiling point at − 196 ° C ( 77 K ) than oxygen's − 183 ° C ( 90 K ), and vessels containing liquid nitrogen can condense oxygen from air: when most of the nitrogen has evaporated from such a vessel there is a risk that liquid oxygen remaining can react violently with organic material.

Liquid extracts are liquids with a lower ethanol percentage than tinctures.

Liquid systems enable higher specific impulse than solids and hybrid rocket engines and can provide very high tankage efficiency.

Liquid hydrogen must be kept colder than about 20 ° C above absolute zero ( 20 K or − 252 ° C or − 423 ° F ) so good insulation is very important.

Liquid chromatography-mass spectrometry ( LC-MS ) offers a modern approach to obtain more detailed process control data than the spectrophotometric and chromatographic measurements used in the past.

Liquid helium, colder than liquid nitrogen, has also been used for cooling.

Liquid breathing is a form of respiration in which a normally air-breathing organism breathes an oxygen-rich liquid ( such as a perfluorocarbon ), rather than breathing air.

Liquid multivitamin-mineral preparations are gaining popularity among those who believe that liquid ( or colloidal ) nutrients are better absorbed from a liquid than when ingested in tablets or pills.

Liquid and spray waxes in particular provide better coverage than solid wax applied with an iron, however to achieve the same durability as hot waxing an iron is used after liquid or spray wax application to maximize penetration of the wax into the base.

Liquid air is hard to keep at a stable composition, since the nitrogen will boil off at a lower temperature than the oxygen, and it can therefore easily become oxygen rich.

Polarizing techniques are easier to apply with cathode ray tube ( CRT ) technology than with Liquid crystal display ( LCD ).

Liquid – gas transitions do have a higher heat of transformation than solid – liquid transitions.

Liquid medicine bottles are not quite as distinctive, but feature a spill proof cap coupled with a dosing syringe that is claimed to be more accurate than spoon dispensing.

Liquid and solid bath foam preparations may also include ingredients for purposes other than foaming, similarly to bath salts and oils.

Liquid mal-distribution is more frequently the problem than vapor.