After the frames and transom are set up on the jig and temporarily braced, a piece of three-inch-wide mahogany ( only widths will be given since the 13/16-inch thickness is used throughout ) is butted between frames one and two below the line of the keelson.

A stem jig is next cut to the proper shape and temporarily fastened to frame one.

Fairing is always a tedious job but the work can be cut down considerably with a Skill planer and a simple jig.

After trimming off the excess on the frames and transom which was used to fasten them to the jig at a working height, the top of the side planking is installed.

In a typical application -- the making of rigid urethane foam sandwich panels -- an amount of foam mixture calculated to expand 10 to 20% more than the volume of the panel is poured into the panel void and the top of the panel is locked in place by a jig.

In Scottish country dancing, the reel is one of the four traditional dances, the others being the jig, the strathspey and the waltz, and is also the name of a dance figure ( see below ).

During the seventeenth century the dance was adopted in Ireland and Scotland, where it was widely adapted, and the jig is now most often associated with these countries.

The jig is second in popularity only to the reel in traditional Irish dance ; it is popular but somewhat less common in Scottish country dance music.

The most common structure of a jig is two eight-bar parts, performing two different steps, each once on the right foot, and one on the left foot.

A light jig is the fastest of all the jigs, danced in ghillies, and are performed in 6 / 8 time.

There are several light jig steps, varying with each dance school, but one step is almost standard in all light jigs.

The term Hop Jig is the subject of some confusion, as some people use it for a single jig, while others use this term to refer to a tune in 9 / 8 time ( e. g., Francis O ' Neill ).

A " fletching jig " is often used in modern times, to hold the fletchings in exactly the right orientation on the shaft while the glue hardens.

The Moore family firm, the Moore Special Tool Company, independently invented the jig borer ( contemporaneously with its Swiss invention ), and Moore's monograph is a seminal classic of the principles of machine tool design and construction that yield the highest possible accuracy and precision in machine tools ( second only to that of metrological machines ).

The gigue () or giga () is a lively baroque dance originating from the British jig.

If a BGA is found to be badly soldered, it can be removed in a rework station, which is a jig fitted with infrared lamp ( or hot air ), a thermocouple and a vacuum device for lifting the package.

As with a hand-tapper, the basic principle is simply that of a jig or fixture to provide the correct alignment.

According to the BBC, it " started life as a jig with Irish roots, whose first appearance seems to be in a collection published in London in 1661 entitled ' An Antidote Against Melancholy ', where it is set to the words ' There was an old man of Waltham Cross '.

* Tenon jig: A tenon jig is a device that holds the workpiece vertically so cuts can be made across the end.

A famous 17th century jig called Kemp's Jig was named after Will Kempe and was published in the first book of John Playford's The English Dancing Master of 1651.

When Neelix decided to leave the ship to stay with a group of his own people, Tuvok gave him a final show of respect and appreciation by doing a small jig with his foot after Neelix declared earlier in the episode he would get the Vulcan to dance before their journey was over.

It was the custom in those days for teams to entertain each other to dinner after a match ... At one banquet Sherwin " obliged " with Oh, Dem Golden Slippers, and surprised the gathering with a jig and a somersault.

Unlike traditional boat construction which involves building of jig and full size lofting of the shape of the hull prior to construction, the Instant Boat method uses shaped panels on pre-shaped permanent frames, plywood, and dimensional lumberyard wood.

Some early piano rags are entitled marches, and " jig " and " rag " were used interchangeably in the mid-1890s.

Because of the longer measures, they are longer than the reel and the light jig, with the same number of bars to the music.

Treble jigs ( also called the Hard or Heavy jig ) are performed in hard shoes, and also to a 6 / 8 time meter.

Many set dances are performed in treble jig time, a few being Drunken Gauger, Blackthorn Stick, The Three Sea Captains, and St Patrick's Day.

Dances such as " the jig " are common among this genre of Cajun music.

In addition to the provinces of the four dances ( famously jig Bobbio Bala Ghidon ), there are tracks for the Carlin May – Cantamaggio, with variant of the feast of the Santa Croce, marriage, Lever ( Leva Levon to Santa Maria ) and that recall places and events related to the past ( the song Draghin ).

Some of the most popular are plastic jigs with lead jig heads, crankbaits or live minnows.

Such tunes are usually referred to nowadays by the Irish name slip jig.

The canoes are constructed by gluing together 1 / 4 " x 3 / 4 " strips of wood over a building jig consisting of station molds that define the shape of the hull.

Called a bucktail jig, they are widely used in the northern and midwestern United States, where many are still hand tied by anglers.

Other types of materials are also used in constructing jig bodies, such as a Chenille wrap on the hook shaft, various feather hackle, hairs or other fur, marabou, Flashabou, and other materials.

Some jigs are constructed identically to their artificial fly counterparts, one example a " Wooly Bugger " fly but tied on a jig head.

Obie and the rest of the class are assigned to stand up and do a jig whenever Jaques utters the word " environment "; Jacques, clearly tipped off in advance by Archie, goes out of his way to used the word as often as possible, with exhausting results.

In many contests, fiddlers are required to play a waltz, a hoedown, and a " tune of choice ," which must not be a waltz or a hoedown ( typically it is a jig or a schottische ).

Pin chucks are also used with high-speed rotary tools other than drills, such as die grinders and jig grinders.

They are tiny diamond rasps for use in a jig grinder doing profiling work in hard material.

* and at the beginning of the word: dzsóker, dzsungel, dzsem, dzsip, dzsida, dzsihád, dzsigg, dzsigoló, dzseki, dzsentri, dzsámi, dzsembori, dzsessz, dzsinn, dzsogging, dzsömper, dzsörzé, dzsunka, dzsuva, dzsúsz, dzsumbuj, dzsúdó, dzsúdzsicu ( both are short ), Dzsenifer, Dzsesszika, Dzsibuti, Dzsószer, Dzsingisz, Dzsungária, Dzsaváharlál, Dzsaipur ( meaning " joker, jungle, jam, Jeep, spear, Jihad, jig, gigolo, jacket, gentry, mosque (< Arabic جامع jami ), jamboree, jazz, djinn, jogging, jumper, jersey, junk ( Asian ship ), dirt, juice, disorder, judo, ju-jitsu, Jennifer, Jessica, Djibouti, Djoser, Genghis, Dzungaria, Jawaharlal, Jaipur ", respectively )

It is also known as the " heavy jig " ( as opposed to the light jig, slip jig, and single jig, and reel which are done as soft shoes ).