Therefore employment and education in all the schools in a metropolitan area are related in different ways from those which are characteristic of the comprehensive high school described in my first report.

Therefore, even though the level of attractant might remain high, the level of CheA-P ( and CheB-P ) increases and the cell begins to tumble.

Therefore, a high heat treatment could remove the visual evidence of patterning associated with carbides but did not remove the underlying patterning of the carbide forming elements ; a subsequent lower-temperature heat treatment, at a temperature at which the carbides were again stable, could recover the structure by the binding of carbon by those elements.

Therefore, as widely recognized, existing low-energy bounds cannot be applied to high-energy phenomena ; however, many searches for Lorentz violation at high energies have been carried out using the Standard-Model Extension.

Therefore, to obtain optimum performance of the fuel cell, a high operating temperature is required.

Therefore ion chamber instruments are used for high radiation rates.

Therefore, the optimal mutation rate for a species is a trade-off between costs of a high mutation rate, such as deleterious mutations, and the metabolic costs of maintaining systems to reduce the mutation rate, such as DNA repair enzymes .< ref name = Sniegowski > Viruses that use RNA as their genetic material have rapid mutation rates, which can be an advantage since these viruses will evolve constantly and rapidly, and thus evade the defensive responses of e. g. the human immune system.

Therefore, metals often have high boiling points, with tungsten ( 5828 K ) being extremely high.

Therefore, despite the fact that meteorites actually fall with virtually equal probability everywhere on Earth, verified meteorite falls tend to be concentrated in areas with high human population densities such as Europe, Japan, and northern India.

Therefore, the missile was ejected from its launch tube using high pressure steam produced by a solid-fueled boiler.

Therefore, those floor areas had to be designed to a smaller plate, with a high window-space to floor-space ratio, to be attractive and marketable to prospective lessees.

Therefore data elements with a high weight contribute more to the weighted mean than do elements with a low weight.

Therefore, if, and are known to high precision, then can be measured to high precision.

Therefore, low frequency of sales coupled with high value in each of these sales make cartels less sustainable.

Therefore, these methods cost huge amount of time though provide high sensitivity to small MO activities.

Therefore at high frequencies and low temperatures shot noise may become the dominant source of noise.

Therefore, the product spread through the Royal Court and the high society and this made a worldwide reputation for Grasse.

Therefore, the pressure wave produced by a high explosive is not significantly increased by confinement as detonation occurs so quickly that the resulting plasma does not expand much before all the explosive material has reacted.

Therefore prophylactic antibiotics should be considered when procedures with high risk endocarditis are performed, such as dental cleaning.

Therefore, it is essential that an implementation uses a source of high entropy for its initialization.

Therefore, there is a gap of 12 hours and 25 minutes between every high tide and between every low tide.

Therefore high bandwidth devices such as network controllers that need to transfer huge amounts of data to / from system memory will have two interface adapters to the AHB: a master and a slave interface.

Therefore, if the testicular artery is ligated, e. g., during a Fowler-Stevens orchiopexy for a high undescended testis, the testis will usually survive on these other blood supplies.

Therefore, the velocity field of the continuum is given by

Therefore the divergence of the velocity field in that region would have a positive value, as the region is a source.

Therefore, negative values of the group velocity will occur in these areas.

Therefore, the spin angular velocity vector () about the spin axis will have to evolve in time so that the matrix product remains constant.

Therefore, the rotation is completely produced by the perpendicular motion around the origin, and the angular velocity is completely determined by this component.

Therefore, the most important fluid velocities are those inside this very thin region in which the change in velocity can be considered linear with normal distance from the surface.

Therefore the larger downward velocity produces a larger aft-leaning component and this leads to larger induced drag on the aircraft with the smaller wingspan and lower aspect ratio.

Therefore, the displacement vector r and its velocity v are always in the plane perpendicular to the constant vector L.

* That resistance of the flux is proportional to uv ( where v is the velocity of the particles and u that of gross matter ) and gravity is proportional to v < sup > 2 </ sup >, so the ratio resistance / gravity can be made arbitrarily small by increasing v. Therefore he suggested that the ultramundane corpuscles might move at the speed of light, but after further consideration he adjusted this to 10 < sup > 5 </ sup > times the speed of light.

Therefore, facial processing has been studied using measurements of mean cerebral blood flow velocity in the middle cerebral arteries bilaterally.

Therefore, based on the principles of fluid dynamics, in a tube of cross sectional area, A, and an average fluid velocity, u, the volume flow rate is given by the equation:

Therefore, it does not accelerate faster and faster ; instead it moves with a finite average velocity, called the drift velocity.

Therefore, the velocity of an electromagnetic wave in such a medium is

Therefore the multistatic ambiguity function is mostly usefully defined as a function of two-or three-dimensional position and velocity vectors for a given multistatic geometry and transmitted waveform.

Therefore a force applied to the edge of the wheel must be less than the force applied to the edge of the axle, because power is the product of force and velocity.

Therefore, the higher the load applied to the muscle, the lower the contraction velocity.

Therefore another trick to achieve lower stresses is that rather than picking up a cargo from the ground at zero velocity, a rotovator could pick up a moving vehicle and sling it into orbit.

Therefore, the interference pattern obtained at each angular velocity of the platform features a different phase-shift particular to that angular velocity.