These defects are created during plastic deformation, such as hammering or bending, and are permanent unless the metal is recrystallized.

These steels were of poor quality, and the introduction of pattern welding, around the 1st century AD, sought to balance the extreme properties of the alloys by laminating them, to create a tougher metal.

These may include a tire patch kit ( which, in turn, may contain any combination of a hand pump or CO < sub > 2 </ sub > Pump, tire levers, spare tubes, self-adhesive patches, or tube-patching material, an adhesive, a piece of sandpaper or a metal grater ( for roughing the tube surface to be patched ), and sometimes even a block of French chalk.

These sheets are rolled at specific and discrete (" chiral ") angles, and the combination of the rolling angle and radius decides the nanotube properties ; for example, whether the individual nanotube shell is a metal or semiconductor.

These usually are not high-value coins, but the interest is in collecting a large volume of them either for the sake of the challenge, as a store of value, or in the hope that the intrinsic metal value will increase.

These factors led to the shift of the store of value being the metal itself: at first silver, then both silver and gold, at one point there was bronze as well.

These electrons are bound to the metal lattice but no longer to an individual atom.

These small electron-emitting regions can form quite rapidly, even explosively, on a metal surface subjected to a high electrical field.

These " roller nuts " were either free-floating in their close-fitting hole across the stock, tied in with a binding of sinew or other strong cording, or mounted on a metal axle or pins.

These consisted of a metal pipe placed on a smaller pipe that when struck with the disc made a gong type sound, while these were much more accurate than a tree, arguments and disagreements led to the invention of the Disc Pole Hole by Ed Headrick in 1975.

These lever systems, which superficially resemble the mechanisms of reed instruments such as the bassoon, include levers mounted beside the regular fingerboard ( near the nut, on the " E " string side ), which remotely activate metal " fingers " on the extension fingerboard.

These metals form an extremely thin layer of oxidized metal on the surface.

These groups built on the work of Agoraphobic Nosebleed, Enemy Soil and The Locust, as well as industrial metal.

These were operated by the flames, which contained carbon monoxide, playing on the ore and reducing the oxide to metal.

These were all metal and were the first machines for mass production and making components with a degree of interchangeability.

These may be made of glass, gemstones, metal, wood, shells, clay and polymer clay.

These metal types of dome switches are very common, are usually reliable to over 5 million cycles, and can be plated in either nickel, silver or gold.

These elements mean that they are often cited as one of the progenitors of hard rock and heavy metal and they have been described as the " definitive heavy metal band ", although they have often eschewed the label.

These range from heavy metal or power metal bands like Stormwarrior and Rebellion to more extreme bands such as Enslaved, Ancient Rites and Behemoth.

These are, oil and gas extraction, coal mining, metal ore mining, nonmetallic mineral mining and quarrying, and support activities for mining.

These are basically walking scrap metal with varying types of ranged and close combat weapons ( killy bitz ) and a wired-in driver.

These reactors can function much like a PWR in terms of efficiency, and do not require much high pressure containment, as the liquid metal does not need to be kept at high pressure, even at very high temperatures.

These usually consist of a long two-story building, in which the boats are stored on racks ( horizontal, usually metal, bars ) on the ground floor with a large door at one end which most probably leads out to a pontoon on the river or lakeside.

These versions allowed 25 modules be to inserted into a single 5-1 / 4 inch section of racking, and allowed the high densities needed to build a computer.

These complexes are often laid out in a similar fashion, and they can contain many different modules to perform a diverse set of chemical manipulations on the developing product.

These different modules are interconnected and influence each other.

These modules can be manufactured in high volume, by organizations familiar with their specialized testing issues, and combined with much lower volume custom mainboards with application-specific external peripherals.

These are modules that may act not only during run-time but also compile time, thus making it possible to alter the language.

These are typically high-quality breadboard modules mounted on a flat casing.

These modules would have used a Soyuz propulsion module, as in Soyuz and Progress, and the descent and orbital modules would have been replaced with a long laboratory module.

These models were characterised by the gradual move towards greater ATM functionality including intelligent, envelopeless deposit by means of automated cheque recognition modules, coin dispense, and electronic cash recognition functions which allows bank customers to deposit cash and cheques with instant processing of the transaction.

These deck modules were brought to the site by specially designed barges and raised into the deck position by a pair of strand jack gantries that could manoeuvre along the main cable.

These modules are mounted on a printed circuit board and designed for use in personal computers, workstations and servers.

These regions of high link density are often referred to as cliques, hubs, compartments, cohesive sub-groups, or modules ... Within food webs, especially in aquatic systems, nestedness appears to be related to body size because the diets of smaller predators tend to be nested subsets of those of larger predators ( Woodward & Warren 2007 ; YvonDurocher et al.

These unital zero algebras may be more generally useful, as they allow to translate any general property of the algebras to properties of vector spaces or modules.

These modules are individual features that the server uses to process requests and include the following:

The Roland TB-303 bass synthesizer These producers were aided in their efforts by the availability of affordable, mass-produced electronic music instruments, including synthesizers, compact sequencers, drum machines ( like the Roland TR-909, TR-808 and TR-707, and Latin percussion machine the TR-727 ) and bass modules ( such as the Roland TB-303 ).

These topics are: structural vs. name equivalence, subtyping rules, generic modules, and parameter modes like.

These genes are theorized to code for cognitive modules that have been shaped by evolution to perform a specific task.

These modules can be controlled from Reason's built-in MIDI sequencer or from other sequencing applications such as Pro Tools, Logic, FL Studio, Digital Performer, Cubase, Sonar, and GarageBand via Propellerhead's ReWire protocol in the 32-bit versions of these software.

These modules can in theory be combined to create larger circuits that comprise a complete dynamical system.

and Areva Nuohms are marketing Independent Spent Fuel Storage Installations ( ISFSI's ) based upon an unshielded muti purpose caniste which is transported and store in on-site vertical or horizontal shielded storage modules constructed of steel and concrete. These systems are in-place and operational at a number of utility sites.

These modules include:

These clusters or modules are interlinked by specialized hub regions, ensuring that overall path lengths across the network are short.

These algebraically compact modules are analogous to injective modules, where one can extend all module homomorphisms.