These include transformers, electric generators, electric motors, high voltage engineering and power electronics.

These motors are available in impulse ranges from " D " to " O ", from several manufacturers.

These motors allow the adjustment of the rotating speed via a potentiometer mounted on a control panel near the motor.

These motors remained the preferred solution until the 1990s, and even as of today are still the most widely used.

These motors are capable of slower rotating speeds approaching 0 Hz.

These first two automobile ambulances were electrically powered with 2 hp motors on the rear axle.

These engines are generally found on hybrid electric vehicles, where efficiency is the goal, and the power lost compared to the Miller cycle is made up through the use of electric motors.

These are the simplest forms of a class of devices called homopolar motors.

These engines are still used for small, portable, or specialized machine applications such as outboard motors, high-performance, small-capacity motorcycles, mopeds, underbones, scooters, tuk-tuks, snowmobiles, karts, ultralights, model airplanes ( and other model vehicles ) and lawnmowers.

These motors are compression ignition, so there are no ignition timing issues and little difference between running forward and running backward.

These allow electric motors to produce much more power rivaling that of fuel-powered engines.

These included plastic parts, can motors, and modern battery holders.

These are low-torque high-speed " can " motors.

These motors tend to be called ' hybrid ' and have more expensive machined parts, but also higher quality bearings.

These TGV-derived components are the traction system derived from third-generation TGV trainsets ( including the four asynchronous AC motors per power car, rectifiers, inverters, and regenerative braking technology ), the structure of the trucks / bogies ( with a long wheelbase dual transom H frame welded steel with outboard mounted tapered roller bearings ), the brake discs ( although there are only three per axle, versus four on the TGV ), and the crash energy management techniques to control structural deformations in the event of an accident.

These motors are each mated to a single-speed, fixed ratio transmission with an aluminium gear.

These work well for both lighting and motors.

These motors are widely used in industrial drives, particularly polyphase induction motors, because they are rugged and have no brushes.

These motors are typically used in applications such as desk fans and record players, as the starting torque is very low and low efficiency is not objectionable.

These pumps, valves, motors and power units have been sold worldwide for over 40 years.

These types of motors are not usually synchronous, but instead necessarily involve a degree of ' slip ' in order that the current may be produced due to the relative movement of the field and the rotor.

These include dust from solid rocket motors, surface degradation products such as paint flakes, and coolant released by RORSAT nuclear powered satellites.

These linear motors are used in maglev trains which float above the rails supported by magnetic levitation.

These frogs are typically fossorial species that emerge after heavy rains and congregate at a breeding site.

These grounds typically could include errors of law, fact, procedure or due process.

These fragments typically feature lacunae or gaps that scholars fill with ' educated guesses ', including for example a " brilliant supplement " by Maurice Bowra in fr. 34, a hymn to the Dioscuri that includes a description of St Elmo's fire in the ship's rigging.

These subunits would typically then again be divided into quarters, with each side being mile long, and being of a square mile in area, or 40 acres.

These are typically written as an ordered pair ( x, y ).

These songs were typically performed while adjusting the rigging, raising anchor, and other tasks where men would need to pull in rhythm.

These typically have a mean diameter of about 0. 7 micrometers.

These " bars " are typically more akin to Culture of the United Kingdom | British " pub s " and are popular at lunchtime.

These antidepressants typically have fewer adverse effects than the tricyclics or the MAOIs, although such effects as drowsiness, dry mouth, nervousness, anxiety, insomnia, decreased appetite, long-term weight gain and decreased ability to function sexually may occur.

These corporate equivalents are typically interest rate swaps referencing Libor or SIFMA.

These securities, known as ADRs ( American Depositary Receipt ) or GDRs ( Global Depositary Receipt ) depending on where they are issued, are typically considered " foreign " and therefore trade at a lower value when first released.

These poles and zone-lines, whilst inducing fluctuations in data density in the reconstructed datasets, which can prove problematic during post-analysis, are critical for determining information such as angular magnification, as the crystallographic relationships between features are typically well known.

These disorders typically also involve depressive symptoms or episodes that alternate with the elevated mood states, or with mixed episodes that feature symptoms of both.

These matters are typically detailed in the organization's bylaws.

These charges have typically been presented as limited time offers exclusively for billionaires.

These were typically based on the brightness of the flame from a " standard candle " of defined composition, or the brightness of an incandescent filament of specific design.

These schools typically offer six facets of education.

These changes are often reactions against the prior cultural form, which typically has grown stale and repetitive.

These are typically made up of a few gags or several bits.

These restaurants are typically decorated with Islamic motifs such as pictures of Islamic rugs and Arabic writing.

These were typically disc-shaped assemblies mounted on the drive shaft.

These vehicles typically sacrifice some depth of capability from civilian models in order to gain greater speed and independence from prime movers.

These users can provide a fresh perspective that can reflect on the state of the CRM development without the typically narrow or invested focus of a software developer.

These forecourts are typically fronted by large stones and it is thought the area in front of the cairn was used for public rituals of some kind.

These are typically cast as part of the crankshaft but, occasionally, are bolt-on pieces.