This network would have enabled easy access by road to the neighbouring countries of Brazil, Venezuela and Surinam ; reduced the costs of utilising the country's timber and natural resources, thus making them more competitive in international markets ; diversified agricultural development by making more easily available suitable areas in the hinterland, particularly in the Intermediate and Rupununi savannahs ; relieved the over-crowded coastland of a significant proportion of its population, thus improving the quality of life of the inhabitants of both the coastal and interior areas ; and made more feasible the equitable distribution of economic activity, not only in the agricultural but also in the manufacturing and small-industries sector.

In 1857 Lamont DuPont solved the main problem when using cheaper sodium nitrate formulations when he patented DuPont " B " Blasting powder ; after manufacturing grains from press-cake in the usual way, the powder was tumbled with graphite dust for 12 hours, forming a coating on each grain which in this case reduced its ability to pick up moisture.

By 1950, after the virtual completion of the by then much watered-out " level of industry " plans, equipment had been removed from 706 manufacturing plants in western Germany and steel production capacity had been reduced by 6, 700, 000 tons.

As a result, manufacturing complexity is greatly reduced and rotating-wheel braille displays, when in actual production, should be less expensive than traditional braille displays.

The landslide drastically reduced power production and tens of thousands of manufacturing jobs were at stake.

Both strategies reduced competition in the electrical lighting manufacturing industry.

This reduced reliance upon L2 cache also allowed AMD to make their L2 cache higher latency and lower bandwidth without significant performance loss, which lessened processor complexity and allowed better manufacturing yields.

Two-sided flags were previously more common, but have been reduced due to increased costs of manufacturing a flag with two different designs.

When provisions are high, the people have so much to pay for them that they have little or nothing left to buy clothes with ; and when they have little to buy clothes with, there are few clothes sold ; and when there are few clothes sold, there are too many to sell, they are very cheap ; and when they are very cheap, there cannot be much paid for making them: and that, consequently, the manufacturing working man's wages are reduced, the mills are shut up, business is ruined, and general distress is spread through the country.

The manufacturing practices introduced by the Carron Company reduced the windage considerably.

By 1950, after the virtual completion of the by-then much watered-down " level of industry " plans, equipment had been removed from 706 manufacturing plants in the west, and steel production capacity had been reduced by 6. 7 million tons.

The scope of applications will certainly increase as manufacturing costs are reduced.

Four large glass manufacturing firms drastically reduced production, and two eventually closed.

However, the basic premise of a structured ASIC is that both manufacturing cycle time and design cycle time are reduced compared to cell-based ASIC, by virtue of there being pre-defined metal layers ( thus reducing manufacturing time ) and pre-characterization of what is on the silicon ( thus reducing design cycle time ).

The main advantages of automated manufacturing are higher consistency and quality, reduced lead times, simplified production, reduced handling, improved work flow, and increased worker morale when a good implementation of the automation is made.

Crewe is perhaps best known as a large railway junction and home to Crewe Works, for many years a major railway engineering facility for manufacturing and overhauling locomotives, but now much reduced in size.

If this can be scaled up in terms of manufacturing, then the total cost of OLED TVs would be greatly reduced.

By 1950, after the virtual completion of the by then much watered-down " level of industry " plans, equipment had been removed from 706 manufacturing plants in the west and steel production capacity had been reduced by 6, 700, 000 tons.

The development of the automobile has contributed to changes in employment distribution, shopping patterns, social interactions, manufacturing priorities and city planning ; increasing use of automobiles has reduced the roles of walking, horses and railroads.

– A critical control point ( CCP ) is a point, step, or procedure in a food manufacturing process at which control can be applied and, as a result, a food safety hazard can be prevented, eliminated, or reduced to an acceptable level.

Mass manufacturing and decades of improvement have reduced this cost gap.

The company has reduced water usage in manufacturing operations by 10. 1 % when compared with 2010 and by 21. 5 % compared to 2008 baseline.

The use of 100 instead of 140 substance paper plus the adoption of side stapling beginning with the May 1960 issue reduced costs sufficiently to allow completion of the fiscal year with nearly $4,000 in unexpended funds.

In total, these increases in operating costs outweigh the savings that result from declining programs and from economy measures, such as reduced numbers of units and installations, smaller inventories of major equipment, and improvements in the supply and distribution systems of the Armed Forces.

The benefits for the altruist may be increased and the costs reduced by being being more altruistic towards certain groups.

While the inclusion of 2600 hardware is required to maintain compatibility with the older system, this drove up production costs and reduced available space on the 7800 ’ s motherboard.

Advocates of autonomous building describe advantages that include reduced environmental impacts, increased security, and lower costs of ownership.

Extremely large objects are normally shipped in sections and assembled onsite, but shipping an assembled unit reduced costs and avoided reliance on construction labor at the delivery site ( which in this case was still recovering from Hurricane Katrina ).

According to Blair ( 1997 ) British Steel faced serious problems at the time of its formation, including obsolescent plants ; plants operating under capacity and thus at low efficiency ; outdated technology ; price controls that reduced marketing flexibility ; soaring coal and oil costs ; lack of capital investment funds ; and increasing competition on the world market.

", a paper by Harvard economist Edward L. Glaeser, delves into similar reasons for city formation: reduced transport costs for goods, people, and ideas.

Benefits include reduced transport costs, exchange of ideas, sharing of natural resources, large local markets, and later in their development, amenities such as running water and sewage disposal.

As the name implies the / S used a serial arithmetic unit, which was much slower but reduced costs so much that the system sold for under $ 10, 000.

This greatly reduced costs over the rival PDP-8 and PDP-8 / I, which consisted of many smaller boards that had to be wired together.

To remain competitive, Encyclopædia Britannica, Inc. has stressed the reputation of the Britannica, reduced its price and production costs, and developed electronic versions on CD-ROM, DVD, and the World Wide Web.

Supermarkets brought with them a self service approach to shopping using shopping carts, and were able to offer quality food at lower cost through economies of scale and reduced staffing costs.

Headquarters restructuring and delegation of decision making has created a flatter more responsive structure and reduced costs.

The average hypnosis patient reduced treatment costs by an average $ 772. 00.

These were developments that had begun before the Industrial Revolution, but the adoption of James Watt's more efficient steam engine from the 1770s reduced the fuel costs of engines, making mines more profitable.

With pressure from Congress to hold down Apollo costs, Saturn V production was reduced, allowing only a single booster per mission.

Epitaxy costs could be reduced by up to 90 % using six-inch silicon wafers instead of two-inch sapphire wafers.

A maquiladora manufacturer operates by importing raw materials into Mexico either tariff free ( NAFTA ) or at a reduced rate on a temporary basis ( 18 months ) and then using Mexico's relatively less expensive labor costs to produce finished goods for export.

Liedtke demonstrated with his own L4 microkernel that through careful design and implementation, and especially by following the minimality principle, IPC costs could be reduced by more than an order of magnitude compared to Mach.

* Most types of masonry typically will not require painting and so can provide a structure with reduced life-cycle costs.

To cut costs, the government froze wages, reduced over-staffed public service departments, and closed some overseas consulates.

In addition, the economics of multiphase production is attractive to upstream operations as it leads to simpler, smaller in-field installations, reduced equipment costs and improved production rates.