* Determining relative humidity: The percent relative humidity can be located at the intersection of the vertical dry bulb and diagonally down sloping wet bulb temperature lines.

* Determining the effect of temperature change on relative humidity: For air of a fixed water composition or moisture ratio, find the starting relative humidity from the intersection of the wet and dry bulb temperature lines.

Determining such forces was required before building codes could specify the required strength of such buildings and such tests continue to be used for large or unusual buildings.

* IPC-2152 Standard for Determining Current-Carrying Capacity in Heavy Copper PCB ( registration required )

* Determining the minimum amount of energy required to heat the material.

* Determining the minimum time required to heat the material.

Determining the date and length of Eric's reign ( before and after his father's death ) is a challenging and perhaps impossible task based on the confused chronology of our late sources.

Determining exactly the various influences is, after more than two thousand years of internal and external influences and developments, impossible but the result has been a large number of unique musical traditions.

Determining whether any changes have been made to a message ( or a file ), for example, can be accomplished by comparing message digests calculated before, and after, transmission ( or any other event ).

* Determining levels of toxic substances before and after bioremediation

Determining the composition of the Memorial depends on the dates of Nehemiah's mission: It is commonly accepted that " Artaxerxes " was Artaxerxes I ( there were two later kings of the same name ), and that Nehemiah's first period in Jerusalem was therefore 445-433 BC ; allowing for his return to Susa and second journey to Jerusalem, the end of the 5th century BC is therefore the earliest possible date for the Memorial.

Determining the satisfiability of a formula in which each clause is a Horn clause ( i. e. it contains at most one positive literal ) is P-complete ; this problem is called Horn-satisfiability.

Determining styles in capoeira is a very tough task, since there was never a unity in the original capoeira, or a teaching method before the decade of 1920.

Determining an instance of the membership problem ; i. e. given a string, determine whether where is the language generated by some grammar ; is also known as parsing.

Determining how much insurance to get, at the most cost effective terms requires knowledge of the market for personal insurance.

Determining a " country of origin " is thus much more difficult than determining other aspects of a gem ( such as cut, clarity etc.

Determining the presence of both parts of this definition is not always straightforward, as hypoglycemic symptoms and effects are vague and can be produced by other conditions ; people with recurrently low glucose levels can lose their threshold symptoms so that severe neuroglycopenic impairment can occur without much warning, and many measurement methods ( especially glucose meters ) are imprecise at low levels.

* Determining the water balance of a region.

* Determining the agricultural water balance.

Determining how many people died in these massacres overall is difficult.

Determining a precise value for a particular knot is difficult because many factors can affect a knot efficiency test: the type of fiber, the style of rope, the size of rope, whether it is wet or dry, how the knot is dressed before loading, how rapidly it is loaded, whether the knot is repeatedly loaded, and so on.

Determining whether a particular event or proceeding constitutes the commencement of adversarial criminal proceedings requires both an examination of the rules of criminal procedure for the jurisdiction in which the crime is charged and the Supreme Courts cases dealing with the issue of when formal prosecution begins.

* Leading / directing: Determining what needs to be done in a situation and getting people to do it.

Determining the distances to astronomical objects is crucial to understanding them, but the vast majority of objects are too far away for their distances to be directly determined.

Determining if the customer is likely to return to reclaim an item is a subjective decision, and wily customers may attempt to persuade the pawnshop owner that the item in question is important to them (" that necklace belonged to my grandmother, so I will certainly return for it "), and they will claim that they will return to recover it.

Determining the redshift of an object in this way requires a frequency-or wavelength-range.

Determining what exactly separates a short story from longer fictional formats is problematic.

Determining the sequence is therefore useful in fundamental research into why and how organisms live, as well as in applied subjects.

Determining part of a protein's amino-acid sequence ( often one end ) by one of the above methods may be sufficient to enable the identification of a clone carrying the gene.

* Determining and prioritizing security needs and aligning them with the perceived threats and the available budget.

Laboratory display of distillation: 1: A heating device 2: Still pot 3: Still head 4: Thermometer / Boiling point temperature 5: Condenser 6: Cooling water in 7: Cooling water out 8: Distillate / receiving flask 9: Vacuum / gas inlet 10: Still receiver 11: Heat control 12: Stirrer speed control 13: Stirrer / heat plate 14: Heating ( Oil / sand ) bath 15: Stirring means e. g. ( shown ), boiling chips or mechanical stirrer 16: Cooling bath.

Perkin triangle distillation setup 1: Stirrer bar / anti-bumping granules 2: Still pot 3: Fractionating column 4: Thermometer / Boiling point temperature 5: Teflon tap 1 6: Cold finger 7: Cooling water out 8: Cooling water in 9: Teflon tap 2 10: Vacuum / gas inlet 11: Teflon tap 3 12: Still receiver

Therefore, as long as the lower pot does not become pressurized or boiled dry, the maximum temperature contacted by the upper vessel will be the boiling point of water, and scalding or uneven heat is avoided.

It is important for a kiln to have a door that is easily opened and closed, because, when the artwork in the kiln has reached the right temperature ( over 1000 degrees Celsius ), it must be quickly removed and put in a metal or tin container with combustible material, which reduces the pot and leaves certain colors and patterns .< ref > Reid, Kimberly.

The pot and contents are heated to cooking temperature, and then sealed in the flask.

The pot is filled with food and heated to cooking temperature, usually to boiling.

The temperature was controlled by hanging the pot higher or lower over the fire, or placing it on a trivet or directly on the hot ashes.

Braising ( from the French “ braiser ”) is a combination cooking method using both moist and dry heat ; typically the food is first seared at a high temperature and then finished in a covered pot with a variable amount of liquid, resulting in a particular flavor.

A reason for high temperature roasting is to brown the outside of the food, similar to browning food in a pan before pot roasting or stewing it.

Closer study shows that the ambient air pressure is a controlling factor, the Earth's gravity holding the water in the pot is a controlling factor, the temperature to which the water has been heated is a controlling factor, etc.

To keep a pot simmering, one brings it to a boil and then reduces the heat to a point where the formation of steam bubbles has all but ceased, typically a water temperature of about 94 ° C ( 200 ° F ).

Since gyokuro is typically steeped at such a low temperature, sources may recommend preheating both the pot and cup to maintain the warmth of the tea as one drinks it.

As the brew continually seeps through the grounds, the overall temperature of the liquid approaches boiling point, at which stage the " perking " action ( the characteristic spurting sound the pot makes ) stops, and the coffee is ready for drinking.

The thickness ensures an even temperature of the oil inside of the pot.

A slow cooker, also known as a Crock-Pot, or Slo-Cooker, ( trademarks that are often used generically in the US-Canada and Australia, or UK, respectively ), is a countertop electrical cooking appliance that is used for simmering, which requires maintaining a relatively low temperature compared to other cooking methods ( such as baking, boiling, and frying ) for many hours, allowing unattended cooking of pot roast, stew, and other suitable dishes.

Cooking the meal in a single pot reduces washing up, and the low cooking temperature and glazed pot make cleaning easy.

Wax heated in any sort of pot must be stirred vigorously or there can be dangerous temperature variations.

Once the water is at the right temperature, the host will pour the water into the pot and steep it for anywhere from 20 seconds to two to three minutes, depending on the tea.

If one heats a pot of soup on the stove the pot will develop a temperature gradient, ( warmest on the bottom and cooler at the surface ).

For flavors that include chocolate chips, a low melting temperature liquid chocolate is poured into the pot, and freezes into a thin shell on top of the ice cream.