Generally, buon fresco works are more durable than any a secco work added on top of them, because a secco work lasts better with a roughened plaster surface, whilst true fresco should have a smooth one.

Generally it is preferred that only the upper surface with the vinyl is cut, but the backing surface is not completely cut through.

Generally, within the Closed Basin the major streams such as Saguache Creek, San Luis Creek, and the streams from the west face of the Sangre de Cristos flow only a short distance onto the valley floor as surface streams.

Generally several pseudopodia arise from the surface of the body ( polypodial-Amoeba proteus ) or a single pseudopodium may form on the surface of the body ( monopodial-Entamoeba histolytica ).

Generally, the form takes less than a week to prepare, after which a production rate of 1 – 10 units / hr · mold is achieved, with items as massive as and as small as with very good surface finish and close tolerances.

Generally, the user stands astride a board or log and swings the adze downwards towards his feet, chipping off pieces of wood, moving backwards as they go and leaving a relatively smooth surface behind.

The surface is Generally low and level apart is upland where the soil is 2d rate.

The surface is Generally level the low Hemlock lands the soil is 3d rate the uplands 2d.

Generally, in very humid or undeveloped regions, the shape of the water table mimics the slope of the surface.

Generally, precipitation will fall to the surface ; an exception is Virga which evaporates before reaching the surface.

Generally it is a fixed volumetric fraction of the respiratory flow, but more complex systems have been developed which exhaust a close approximation of a ratio to the surface respiratory flow rate.

Generally, mining is either done from the surface or underground.

Generally, ignition systems try to apply flames across the injector surface, with a mass flow of approximately 1 % of the full mass flow of the chamber.

Generally, a control surface will contain one or more controls that can be assigned to parameters in the software, allowing tactile control of the software.

Generally, large current devices have large die and packaging surface areas and lower thermal resistance.

Generally, if the clinical history is consistent with Stevens – Johnson syndrome, and the skin lesion covers greater than 30 % of the body surface area, the diagnosis of TEN is appropriate.

) The braking force varies depending on the engine, but also what gear the vehicle is in ( Generally, the lower the gear, the higher the braking effect as long as the wheels continue to maintain traction with the road surface ).

Generally, if the player fails to follow a strict procedure ( for instance, checking if a guard returned the player's ID card, rather than someone else's ), the consequences will not surface until much later in the game.

Unlike Bulk micromachining, where a silicon substrate ( wafer ) is selectively etched to produce structures, surface micromachining builds microstructures by deposition and etching of different structural layers on top of the substrate .. Generally polysilicon is commonly used as one of the layers and silicon dioxide is used as a sacrificial layer which is removed or etched out to create the necessary void in the thickness direction.

Generally, a minimum tip-sample spacing is specified to prevent the tip from crashing into the sample surface at the 0 V tip-sample bias.

Generally, if the water contact angle is smaller than 90 °, the solid surface is considered hydrophilic.

Generally, where water erosion rates on disturbed upland areas are greatest, rills are active.

Generally, 3 grams of tea per 200 ml of water, or about two teaspoons of oolong tea per cup, should be used.

Generally, the water solubilitity of uric acid and its alkali metal and alkaline earth salts is rather low.

Generally, to supply enough oxygen for respiration, a spacesuit using pure oxygen must have a pressure of about, equal to the partial pressure of oxygen in the Earth's atmosphere at sea level, plus and water vapor pressure, both of which must be subtracted from the alveolar pressure to get alveolar oxygen partial pressure in 100 % oxygen atmospheres, by the alveolar gas equation .< ref >

Generally between 10 to 14 feet ( 3 – 4 m ) in length, surf casting rods need to be longer in order for the user cast the lure or bait beyond the breaking surf where fish tend to congregate, and sturdy enough to cast heavy weighted lures or bait needed to hold the bottom in rough water.

Generally an anchor warp should be 4 times the depth of the water.

Generally fog refers to a cloud composed of liquid water ( the term ice fog usually refers to a fog that formed as liquid water and then froze, and frequently seems to occur in valleys with airborne pollution such as Fairbanks, Alaska, while diamond dust forms directly as ice ).

Generally, most roads, major ports and airports, water distribution systems and sewage networks are publicly owned, whereas most energy and telecommunications networks are privately owned.

Generally road and rail transport networks, as well as water and waste management infrastructure are designed by civil engineers, electrical power and lighting networks are designed by power engineers and electrical engineers, and telecommunications, computing and monitoring networks are designed by systems engineers.

Generally the water is removed by pumping while the quarry is operational, but for high inflows more complex approaches may be required.

Generally the deeper the water the more complicated the

Generally, seltzer water has no added sodium salts, while club soda still retains the sodium salts.

Generally, dehumidifier water is considered a rather clean kind of greywater: not suitable for drinking, but acceptable for watering plants, though not garden vegetables

Generally shallow ( 15 feet ) and is considered a very good pond to water ski on and good for fishing.

Generally, the ratio of sugar to water can range anywhere from 1: 1 to 2: 1.

Generally, oximes exist as colorless crystals and are poorly soluble in water.

Generally they have smaller home ranges and larger density in habitats that have plenty of food and water available, and vice versa if resources are not readily available.

Generally Gyrinids lay their eggs under water, attached to water plants, typically in rows.

Generally, air temperature gets cooler relative to nearby locations as one moves closer to a large body of water.

Generally in morning people eat chuda-dahi ( dahi-chuda is favorite of Brahmins ) with KOHADA ( red pumpkin ) ka bhujiya which is made specially with sugar and salt combination without adding water in it, with lots of LAI, i. e. laddus made of til, chuda, chawal ( rice ).

Generally found in shallow waters, some combtooth blennies are capable of leaving the water for short periods during low tide, aided by their large pectoral fins which act as " feet ".